Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 50 sets per month |
| Delivery Time | 7 Days |
| Packaging Details | Carton Box |
| Control mode | PLC, 7" touch screen control |
| Drive | Servo motor and cam drive |
| Helical spring | Elastic coefficient 25N/mm |
| Drop height | 40mm |
| Turntable | It can be rotated and fixed at 12-30° |
| Counterweight | 100g*10, 150g*5, 200g*5 |
| Test count | 0-999999 times, touch screen preset |
| Interval time | 0-999999 seconds, touch screen preset |
| Brand Name | Sinuo |
| Model Number | SN2157-3 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60335-2-24 φ75mm Sphere Test Probe with Nylon Handle
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 50 sets per month |
| Delivery Time | 7 Days | Packaging Details | Carton Box |
| Control mode | PLC, 7" touch screen control | Drive | Servo motor and cam drive |
| Helical spring | Elastic coefficient 25N/mm | Drop height | 40mm |
| Turntable | It can be rotated and fixed at 12-30° | Counterweight | 100g*10, 150g*5, 200g*5 |
| Test count | 0-999999 times, touch screen preset | Interval time | 0-999999 seconds, touch screen preset |
| Brand Name | Sinuo | Model Number | SN2157-3 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Touch Screen Electrical Appliance Testing Equipment ，25N/mm Electrical Appliance Testing Equipment | ||
IEC61009-1 Circuit Breaker Mechanical Shock Tester Touch Screen Control
Product overview
The mechanical shock test equipment is based on the relevant requirements of IEC60898-1, IEC61009-1, IEC60934:2007.
Design and manufacture, suitable for circuit breaker products, to verify the impact resistance of exposed parts that may be subjected to mechanical shock during normal use of the circuit breaker.
The equipment adopts PLC control, touch screen operation, motor-driven cam mechanism to control the lifting action, the interval time can be preset, the whole machine adopts a floor-standing structure, easy to operate, practical and beautiful.
Equipment principle
Designed in accordance with IEC60898-1, the mounting plate equipped with the circuit breaker is lifted by the motor control cam, and instantly falls freely to the metal stop plate equipped with a spiral spring with an elastic coefficient of 25N/mm. This reciprocating 50 times, the sample is switched to another 3 90-degree directions through the turntable to repeat the test 50 times.
Overview of the test process
1. Fix the test product on the front of the vertical plate, make the test product in the closed position, but do not connect any power, press the touch screen to reset, the working platform rises to the initial state of the free end, and the counterweight is applied to the opposite side of the sample mounting plate. The helical spring is compressed by 1mm (that is, the force acting on the metal stop plate is 25N at this time).
2. Press the start button on the touch screen, the free end of the working plane will automatically rise to a height of 40mm and fall, record the time of the sample from vibrating to standstill, and set the fall time to be greater than this standstill time. Set the number of drops to 50 times. Then press start again, the sample will fall back and forth 50 times automatically
3. Rotate the turntable by 180° and repeat the drop test 50 times.
4. Rotate the turntable by 90° and repeat the drop test 50 times.
5. Rotate the turntable by 180° and repeat the drop test 50 times.
6. Other angle tests can be freely selected
Main Teachnical Parameter
| Control mode | PLC control, 7-inch touch screen operation |
| Drive | Servo motor and cam drive |
| Helical spring | Elastic coefficient 25N/mm |
| Drop height | 40mm |
| Turntable | It can be rotated and fixed at 12-30° |
| Counterweight | 100g*10, 150g*5, 200g*5 |
| Test count | 0-999999 times, touch screen preset |
| Interval time | 0-999999 seconds, touch screen preset |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!