Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, , T/T, Western Union, MoneyGram |
| Supply Ability | 1 set per month |
| Delivery Time | 45 Days |
| Packaging Details | Plywood |
| Applied Standard | VW 80000-2017 |
| Applied Figure | Clause 11.15.1 |
| Temperature Range | Ambient~60°C |
| Temperature Fluctuation | ≤1℃ |
| Temperature Accuracy | 0.1 ℃ |
| Heating Rate | ≥10℃/30min |
| Cooling Rate | ≥65℃/75min |
| Humidity Range | 100%RH (+0%, -5%, condensation process) |
| Brand Name | Sinuo |
| Model Number | SN8817 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
Product Specification
| Payment Terms | L/C, , T/T, Western Union, MoneyGram | Supply Ability | 1 set per month |
| Delivery Time | 45 Days | Packaging Details | Plywood |
| Applied Standard | VW 80000-2017 | Applied Figure | Clause 11.15.1 |
| Temperature Range | Ambient~60°C | Temperature Fluctuation | ≤1℃ |
| Temperature Accuracy | 0.1 ℃ | Heating Rate | ≥10℃/30min |
| Cooling Rate | ≥65℃/75min | Humidity Range | 100%RH (+0%, -5%, condensation process) |
| Brand Name | Sinuo | Model Number | SN8817 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | VW 80000-2017 Condensation Test Chamber ，Clause 11.15.1 Condensation Test Chamber ，100%RH Condensation Test Chamber | ||
VW 80000-2017 Motor Vehicle Components Condensation Test Chamber
Product overview:
This condensation test chamber meets the condensation test requirements of .VW 80000-2017,DIN EN ISO 6270-2, GS95011-4-2004, DIN 50017, etc.
It simulates the condensation on electronic modules in motor vehicles. It is meant to evaluate the robustness of electronic modules with respect to condensation.
Technical parameters:
| Size | Working area | 600*500*830mm(W*D*H) |
| External size | Approx. 1200*750*1300mm(W*D*H) | |
| Performance | Temperature range | Ambient～60℃ (common used temperature: 38℃/49℃/60℃) |
| Temperature fluctuation | ≤1℃ (≤±0.5℃, tested according to GB/T5170-2008) | |
| Temperature accuracy | 0.1 ℃ | |
| Temperature deviation | ±2℃ | |
| Humidity range | 100%RH (+0%, -5%, during condensation) | |
| Heating rate | ≥10℃/30min (with load of 20KG steel,meet condensation test of VW80000-2013) | |
| Cooling rate | ≥65℃/75min (with load of 20KG steel,meet condensation test of VW80000-2013) | |
| Temperature and humidity measuring parts | Use high-precision A-level PT100 temperature sensor for temperature measurement | |
| Heating method | Electric heating, PID adjustment, actuator: solid state relay | |
| Heating system | New-type ceramic heating frame, with heating wire imported from Germany in the middle, thick wire diameter, high temperature resistance, dry burning resistance | |
| Humidification system | External humidification, the humidification tube adopts U-shaped design and over-temperature probe hole, | |
| Dehumidification system | Using evaporator coil dew point temperature laminar flow contact dehumidification method | |
| Water supply system | The humidification water supply adopts automatic control, and the residual water can be recycled, saving water and reducing consumption | |
| Cooling System | Fully enclosed Tecumseh compressor imported from France, using R404 and R23 DuPont environmentally friendly refrigerant | |
| Wind tunnel | Forced circulating air duct to ensure uniform temperature in the working room; heaters, coolers, and temperature sensors are installed in the air duct | |
| Condensate outlet | With outlet holes for studio condensate and unit condensate | |
| Timing range | 1～9999 mins/hours | |
| Materials | Outer wall material | A3 iron plate sprayed |
| Inner wall material | SUS304 Stainless steel plate | |
| Insulation material | Rigid polyurethane foam | |
| Observation window | Three-layer explosion-proof tempered glass window | |
| Lead hole | 2 Φ100mm lead holes, with cover and soft plug, located on the left and right walls of the chamber | |
| Sample rack | 2PCS, SUS304 stainless steel material, adjustable spacing storage track, sample rack can be adjusted up and down according to needs, evenly bearing 30KG/layer. | |
| Light | There is a lighting lamp on the top of the observation window, which is controlled by the switch outside the door, which is convenient and clear to observation | |
| Movable casters |
4 movable casters
|
|
| Humidification tank | High quality 304 stainless steel water tank | |
| Control element |
Using MCGS programmable temperature and humidity controller (7-inch 16-bit true color touch screen); English menu operation mode, 120 groups memory program, each program group contains 1200 program segments, all loops, up to 999 times. Controller: The controller with English display has the function of self-diagnosis, prompts the cause of failure and treatment method, records test data and process, and has a standard RS232 or U disk communication interface. |
|
Company Details
Business Type:
Manufacturer
Total Annual:
2000000 USD-3000000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
.gtr-container-f7h2j9k1 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333333; line-height: 1.6; padding: 20px; box-sizing: border-box; border: none !important; } .gtr... .gtr-container-f7h2j9k1 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333333; line-height: 1.6; padding: 20px; box-sizing: border-box; border: none !important; } .gtr...
Get in touch with us
Leave a Message, we will call you back quickly!