Sinuo Testing Equipment Co. , Limited
| Payment Terms | L/C, T/T |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Standard Exporting Plywood Case |
| Applied standard | IEC 60335-1 |
| Applied clause | 25.15 |
| Pull force weights | 10N*2, 20N*2, 30N*2 |
| Torque weights | 5N*1,12.5N*1,17.5N*1 |
| Pull force frequency | 1 time/s |
| Torque arm | 20mm |
| Brand Name | Sinuo |
| Model Number | SN1113 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Standard Exporting Plywood Case |
| Applied standard | IEC 60335-1 | Applied clause | 25.15 |
| Pull force weights | 10N*2, 20N*2, 30N*2 | Torque weights | 5N*1,12.5N*1,17.5N*1 |
| Pull force frequency | 1 time/s | Torque arm | 20mm |
| Brand Name | Sinuo | Model Number | SN1113 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Pull Force And Torque Test Apparatus ，Clause 25.15 Torque Test Apparatus ，Cord Anchorage Torque Test Apparatus | ||
IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force and Torque Test Apparatus
Product Information:
The Cord Anchorage Pull Force and Torque Test Apparatus is designed and manufactured according to the standard requirements of IEC60335-1 clause 25.15, IEC60065:2014 clause 16.5, IEC60884-1, IEC60598-1, etc. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing.
Test process:
A mark is made on the cord at a distance of approximately 20 mm from the cord anchorage or other suitable point. The mark is made while the cord is subjected to a pull force of.
- 100N, for fixed appliances regardless of the mass of the appliance, the value as shown in Table 12.for other appliances
The cord is then pulled, without jerking. for 1 s in the most unfavorable direction with the force specified. The test is carried out 25 times.
The cord, unless on an automatic cord reel, is then subjected to a torque that is applied as close as possible to the appliance. The torque is specified in Table 12 and is applied for 1 min.
Technical Parameters:
| Applied standard | IEC 60335-1 |
| Applied clause | 25.15 |
| Power Supply | AC220V, 50Hz |
| Pull force weights | 10N*2, 20N*2, 30N*2( the pulling force of 30N, 60N, 80N, 100N can be achieved) |
| Torque weights | 5N*1,12.5N*1,17.5N*1(the torque force 0.1Nm, 0.25Nm, 0.35Nm can be achieved) |
| Test times | 0~9999(selectable),25 times is by default |
| Pull force frequency | 1 time/s |
| Torque arm | 20mm |
| Torque time | 0.01S～99 hours 99 min |
| Clamp | Combined clamp for both pull force and torque, matching by the bearing, can reduce the friction when processing torque test |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!