Payment Terms | L/C, T/T |
Supply Ability | 60 Sets Per Month |
Delivery Time | 10 Days |
Packaging Details | Standard Exporting Boxed |
Applied standard | IEC 60335-1 |
Applied clause | Clause 8 |
Test sample | Current leakage |
Test condition | Normal operation, abnormal operation, and single fualt operation |
Specification | 2000 Ω |
Warranty | One Year |
Brand Name | Sinuo |
Model Number | SN2210-81 |
Certification | Calibration Certificate (Cost Additional) |
Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
Payment Terms | L/C, T/T | Supply Ability | 60 Sets Per Month |
Delivery Time | 10 Days | Packaging Details | Standard Exporting Boxed |
Applied standard | IEC 60335-1 | Applied clause | Clause 8 |
Test sample | Current leakage | Test condition | Normal operation, abnormal operation, and single fualt operation |
Specification | 2000 Ω | Warranty | One Year |
Brand Name | Sinuo | Model Number | SN2210-81 |
Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
High Light | Clause 8 Non Inductive Resister ,IEC 60335-1 Non Inductive Resister ,Current Leakage Non Inductive Resister |
IEC 60335-1 Clause 8 Non - Inductive Resister 2k Ω For Current Leakage
Product Information:
This 2 000 Ω ± 10 % non-inductive resistor (category: wire-wound resistors) meets the requirements of IEC 60335-1 clause 8, IEC 60950-1:2013 clause 2.4.2 and etc. Used to test the leakage current between primary and secondary.
An electrical energy source class is determined from both voltage and the current under normal operating conditions, abnormal operating conditions, and single fault conditions (see Table 4).
The values are the maximum that can be delivered by the source.
Test Procedures and Operation
Please refer to the relevant standards.
Take IEC 60335-1 clause 8 as an example:
Voltages and currents are measured between the relevant parts and each pole of the supply source. Discharges are measured immediately after the interruption of the supply. The quantity of electricity in the discharge is measured using a resistor having a nominal non-inductive resistance of 2000 Ω.
NOTE 1 Details of a suitable circuit for measuring the current are given in figure 4 of IEC 60990.
NOTE 2 The quantity of electricity is calculated from the sum of all areas recorded on the voltage/time graph without taking voltage polarity into account.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification:
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!