Payment Terms | T/T |
Supply Ability | 50 sets per month |
Delivery Time | 30 Days |
Packaging Details | Carton |
Applied standard | BS EN 12983-1 |
Applied clause | Annex Q.2.11 |
Dial indicator accuracy | 0.01mm |
Measuring range | φ100mm~φ300mm |
Round bottom utensil | Measure two perpendicular diameters |
Non-round bottom utensil | Measure the largest and the smallest diameter |
Measuring point | Circle of 10mm |
Warranty | Free warranty |
Brand Name | Sinuo |
Model Number | SN1608 |
Certification | Calibration Certificate (Cost Additional) |
Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
Payment Terms | T/T | Supply Ability | 50 sets per month |
Delivery Time | 30 Days | Packaging Details | Carton |
Applied standard | BS EN 12983-1 | Applied clause | Annex Q.2.11 |
Dial indicator accuracy | 0.01mm | Measuring range | φ100mm~φ300mm |
Round bottom utensil | Measure two perpendicular diameters | Non-round bottom utensil | Measure the largest and the smallest diameter |
Measuring point | Circle of 10mm | Warranty | Free warranty |
Brand Name | Sinuo | Model Number | SN1608 |
Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
High Light | EN 12983-1 Bottom Concavity Measurement Instrument ,10mm Bottom Concavity Measurement Instrument |
BS EN 12983-1 Bottom Concavity Measurement Instrument For Measure The Concavity
Product Information For Bottom Concavity Measurement Instrument:
The Cookware Bottom Concavity Measurement Instrument complies with EN 12983-1:2020, annex Q.2.11. It is used to measure the concavity of the bottom of the pot (thermal shock deformation).
Technical Parameters For Bottom Concavity Measurement Instrument:
A. Dial indicator accuracy 0.01mm
B. Measuring diameter range φ100mm~φ300mm
C. Measuring support point:
For round bottom utensil: Measure two perpendicular diameters
For non-round bottom utensil: Measure the largest and the smallest diameter
D. Measuring point: A diameter of a circle of 10mm diameter centered on the bottom of the pot.
Test Procedures and Operation For Bottom Concavity Measurement Instrument:
A. Adjust the support foot to the diameter position and fix it, and, Set the dial indicator to zero when it is on a flat surface
B. The test device is placed in the pot to test the concavity of heating deformation.
Note: for non-pan, it is not necessary to set the dial indicator to zero in advance
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification:
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!