Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood |
| Test station | Single station |
| Drive mode | Servo motor |
| Force | 0-500N |
| Force holding time | 0-999.9s |
| Interval time | 0-999.9s |
| Power | AC220V, 60Hz |
| Dimensions | 100mm×400mm×1500mm |
| Weight | Approx. 150kgs |
| Brand Name | Sinuo |
| Model Number | SNQC1017 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
400A 8 Channels Vehicle Testing Equipment Electric Car Vehicle Connectors
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Plywood |
| Test station | Single station | Drive mode | Servo motor |
| Force | 0-500N | Force holding time | 0-999.9s |
| Interval time | 0-999.9s | Power | AC220V, 60Hz |
| Dimensions | 100mm×400mm×1500mm | Weight | Approx. 150kgs |
| Brand Name | Sinuo | Model Number | SNQC1017 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | Charging Plug Misalignment Test Apparatus ，Vehicle Charging Plug Misalignment Test Apparatus ，IEC62196-3 Vehicle Testing Equipment | ||
Electric Vehicle Accessories Charging Plug Misalignment Test Apparatus IEC62196-3
Product Overview For Misalignment Test Apparatus:
This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18.
Technical Parameters For Misalignment Test Apparatus:
| Power | AC220V, 60Hz |
| Control Method | PLC control, touch screen operation |
| Station | One |
| Drive Mode | servo motor, two pcs, X and Y |
| Force | 0-500N |
| Force holding time | 0-999.9s |
| Interval time | 0-999.9s |
| Force application direction | -X, +X, -Y, +Y |
| Specimen mounting bracket | 30 ° slope, 1000mm height from the ground |
| Overall dimensions of equipment | 100mm×400mm×1500mm,150kg |
During temperature rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18.
Using a force gauge, apply a load of 100 N with a tolerance of -0/+10 N as illustrated in Figure 19 in each direction. The load should be applied for a minimum of 1 min. Following this load application, the load should be removed for a time of 10 s and the load re-applied in the next direction within 10 s. This process is continued until the load is applied in the 4 directions (-X, +X, -Y, +Y) as illustrated in Figure 19.
The equipment adopts X, Y (Figure 19) sliding table, driven by servo motor and monitored by force value sensor. When the force value reaches the required time for automatic constant force holding, it will automatically switch to another direction for test.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!