Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 days |
| Packaging Details | Plywood Case |
| Test Station | Single station |
| Drive Mode | Servo motor |
| Clamping Method | Mechanical clamping |
| Control Method | PLC control |
| Flexing Angle | 0-360°, adjustable |
| Flexing Rate | 0-60 cycles/min |
| Flexing Cycles | 0~999999 can be preset |
| Load Power | Built-in, with adjustable phase |
| Brand Name | Sinuo |
| Model Number | SNQC1009 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 days | Packaging Details | Plywood Case |
| Test Station | Single station | Drive Mode | Servo motor |
| Clamping Method | Mechanical clamping | Control Method | PLC control |
| Flexing Angle | 0-360°, adjustable | Flexing Rate | 0-60 cycles/min |
| Flexing Cycles | 0~999999 can be preset | Load Power | Built-in, with adjustable phase |
| Brand Name | Sinuo | Model Number | SNQC1009 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 62196-1 vehicle plugs test apparatus ，non-rewireable vehicle plugs tester ，flexing test equipment for vehicle plugs | ||
IEC 62196-1 Non-Rewireable Accessories Flexing Test Apparatus For Vehicle Plugs Test
Product Overview:
The Non-Rewireable Accessories Mechanical Strength Flexing Testing Apparatus is specially designed according to IEC 62196-1:2022 clause 26.4 table 14 and IEC 60309-1:2012 clause 24.4 figure 9.
It is used for conducting mechanical load flexing tests on vehicle plugs, socket-outlets, and couplers for non-rewireable accessories.
Equipped with PLC intelligent control, a 7-inch color HMI, and a high-precision servo motor, the system ensures accurate angle control, stable flexing frequency, and fully automated testing.
The operator can preset the flexing angle, flexing speed, and test cycles directly from the touch screen. The machine automatically runs the test and stops when reaching the preset cycle count.
The apparatus includes built-in load power, allowing adjustable phase voltage and current during testing. Modular fixtures, digital display, frequency conversion control, and high-precision speed adjustment make it ideal for professional laboratories and certification centers.
Features:
✔ Fully compliant with IEC 62196-1 & IEC 60309-1 test standards
✔ Servo motor drive for precise and stable flexing motion
✔ PLC control with 7-inch color touchscreen
✔ Adjustable flexing angle 0–360° (default 90°, 45° each side)
✔ Preset flexing rate up to 60 cycles/min
✔ Up to 999,999 programmable test cycles
✔ Built-in load voltage (0–250V) and AC 0–400A adjustable
✔ Automatic test completion signal
✔ Modular fixtures with adjustable clamping point
✔ Six-digit memory settings & digital precision control
Technical Parameters:
| Test Station | Single |
| Electrical Control Method | PLC intelligent integrated control, 7-inch humanized touch interface operation |
| Drive Mode | Servo motor |
| Sample Clamping Method | Mechanical clamping, the position of clamping point is adjustable |
| Flexing Angle | 0-360° can be adjusted freely (default 90°, 45°on either side of the vertical) |
| Flexing Rate | 0-60 cycles / min, can be preset |
| Flexing Cycles | 0~999999 can be preset, default 20000 cycles |
| Load Weights | 20N, 25N, 50N, 75N, 100N, 120N, 140N, 180N |
| Load Power |
Built-in, with adjustable phase voltage between conductors 0-250V and current AC0-400A adjustable Note: for load >400A, please use an external power source |
| Test Judgment | Judging by the signals given when the current is conducted or not |
| Equipment Dimensions & Weight | L 850mm *W 800mm *H 1500mm, the whole machine is about 300Kg |
| Power Supply | Three phase AC380V±10%, 50/60Hz |
| No. | Fault | Reason | Treatment |
|
1 |
Turn on the POWER switch, but the indicator light not turn on | The external power supply is not connected | Please connect to the external power supply |
| The fuse is broken | Find out the reason and change the fuse. | ||
| The indicator light damaged | Replace the light | ||
|
2 |
Turn on the POWER switch, Touch screen not work | The internal DC24V power supply is in problem | Replace the DC24V power supply |
| Touchscreen damaged | Replace the touchscreen | ||
| 3 | Touch screen no response | Connection to PLC loose | Reconnect |
| Touchscreen damaged | Replace the touchscreen | ||
| 4 | Load power no power supply | Load socket damaged | Replace the socket |
| The fuse is broken | Change the fuse | ||
|
5 |
Press down Start button, but the fixture do not work. |
The display value and preset value of test times are the same | Press Count Cleared |
| The E-STOP button is not reset | Release E-STOP button | ||
| There is foreign object in the machine, the machinery is stuck | Remove the foreign object | ||
| It is not under auto test mode | Press Start button | ||
| Connection to motor loosen | Reconnect | ||
| Not in starting position | Homing | ||
| 6 | Motor rotates but the manipulator does not rotate | Check whether the motor output shaft connector is loose | Re-connect |
| Check whether the drive belt is broken or too loose | Replace the drive belt | ||
| 7 | Noise | Swivel speed low or too high | Reset the speed |
| Connection to motor loosen | Reconnect |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!