Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood Case |
| Operation Method | PLC control |
| Drive Mode | Electric |
| Torque Time | 0-99H59M59S |
| Torque Wheel | R100mm±0.5mm |
| Tensile Frequency | 1 time/s |
| Pull Cycles | 1-9999 cycles |
| Torque Weights | One set |
| Pull Force Weights | One set |
| Brand Name | Sinuo |
| Model Number | SNQC1007B |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets Per Month |
| Delivery Time | 30 Days | Packaging Details | Plywood Case |
| Operation Method | PLC control | Drive Mode | Electric |
| Torque Time | 0-99H59M59S | Torque Wheel | R100mm±0.5mm |
| Tensile Frequency | 1 time/s | Pull Cycles | 1-9999 cycles |
| Torque Weights | One set | Pull Force Weights | One set |
| Brand Name | Sinuo | Model Number | SNQC1007B |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | EV charger cable test equipment ，IEC 61851-23 torque test equipment ，EV charger anchorage pull tester | ||
IEC 61851-23 EV Charger Side B Cable Assembly Anchorage Pull & Torque Test Equipment
Product information:
This specialized testing system is engineered to assess the mechanical robustness of electric vehicle charging cable assemblies, focusing on connector retention strength and rotational resistance during operation. Built to comply with the tensile and torque evaluation requirements of theIEC 61851-23: 2023, figure 111 standard for EV charging infrastructure, it provides repeatable and accurate measurements that support quality assurance and certification testing.
Testing Capabilities
Cable Anchorage Strength Evaluation
Measures the ability of the charging cable and plug connection to resist axial pull forces under controlled loading conditions.
Twist Resistance Assessment
Applies rotational loads to simulate torque stresses that may occur during repeated handling, ensuring connector integrity throughout service life.
Preset Test Cycles & Duration
Users can configure test repetition count and torque application duration to simulate extended usage scenarios.
Design & Operation
Motor-Driven Load Application
Pull force is generated through an electric drive mechanism, which translates motor motion into linear tension on the cable assembly for consistent force application.
Torque Load Delivery
The torque component is applied using calibrated weights coupled with a lever arm, ensuring precise torsional stress according to predefined settings.
Control System
An automated control unit manages test execution with programmable settings for cycle count and loading durations.
Key Features
Weight-based tension application and torque loading via torque arm and weights
PLC control system for automated test cycles and timing functions
Automatic stop when test cycle count or duration is reached
Clear compliance check: after testing, the maximum displacement of the charging connector cable must remain within the standard’s requirement
Usage Environment
Power supply: AC220V ±10%, 50/60Hz, 1kW
Operating temperature: 0–40℃, humidity: 30–90%
Dimensions: approx. 1600(W) × 600(D) × 1450(H) mm
Machine weight: about 180 kg
This apparatus is an essential quality control tool for EVSE (Electric Vehicle Supply Equipment) manufacturers, test labs, and certification bodies, helping ensure charging products meet international reliability and safety benchmarks.
Technical parameters:
| Test content | Supply plug and/or vehicle plug cable of EV charging station tension test and torque test |
| Equipment structure schematic diagram | Refer Schematic |
| Control operation mode | PLC automatic control, touch screen operation |
| Drive mode | Electric |
| Pull apply | Meet 160N, 200N, 240N, 250N, 500N specifications, realized by superposition of weights |
| Torque apply | Meet 0.6N·m, 0.7N·m, 1.4N·m, 2.7N·m, 5.4N·m, 11.0N·m, 16.3N·m specifications,realized by superposition of weights |
| Torque wheel | R100mm(Ф200mm) ±0.5mm |
| Tensile frequency | 1 time/s, the actual pull time is detected by electrical signal |
| Pull cycles | 1-999999 cycles, can be preset, default is 100±1 cycles |
| Torque application time | 0-99H59M59S,can be preset |
| Power failure protection | With power-off data storage memory function |
| Fixture | Universal clamp, one set |
| Weight matching selection table | |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!