Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 sets per month |
| Delivery Time | 30 days |
| Packaging Details | plywood case |
| Inner Dimensions | 1500×500×1000mm |
| Temperature range | Room temp ~ 100℃ |
| Temperature stability | <1.5℃ |
| Heating power | 18kW |
| Insulation power | 5kW |
| Temperature Circulation | Circulating pump for uniform temperature |
| Brand Name | Sinuo |
| Model Number | SNQC1015(750L) |
| Certification | Calibration Certificate(Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
ISO 4892 UV Weatherproof Accelerated Aging Environmental Test Chamber
ASTM G154 UV UVA340 Lamp Weathering Aging Test Chamber Programmable
IEC60068 Environmental Test Chamber Stainless Steel Board Xenon Lamp Simulating
IEC60529-2013 Fig 2 IP5X IP6X Sand Dust Environmental Test Chamber 1000L
Product Specification
| Payment Terms | T/T | Supply Ability | 10 sets per month |
| Delivery Time | 30 days | Packaging Details | plywood case |
| Inner Dimensions | 1500×500×1000mm | Temperature range | Room temp ~ 100℃ |
| Temperature stability | <1.5℃ | Heating power | 18kW |
| Insulation power | 5kW | Temperature Circulation | Circulating pump for uniform temperature |
| Brand Name | Sinuo | Model Number | SNQC1015(750L) |
| Certification | Calibration Certificate(Cost Additional) | Place of Origin | China |
| High Light | PVC cable water bath tester ，digital temperature control water bath ，circulating pump cable testing equipment | ||
Water Bath For PVC Cable Testing With Digital Temp Control & Circulating Pump
Product information:
This equipment is a water tank type. The inner tank and the cover are made of stainless steel. The chassis is carefully made of high-quality cold-rolled steel plates. It adopts electric heating, intelligent temperature control, and digital display. A circulating pump can be selected to force circulation to ensure temperature uniformity and achieve constant temperature of liquids such as oil and water.
This equipment has the characteristics of beautiful appearance, corrosion resistance, stable temperature control, energy saving and practicality, convenient maintenance, and long service life. It is a supporting product for quality inspection agencies and wire and cable companies to measure the DC resistance and insulation resistance of wires and cables. It is a device specially designed for electrical performance testing of PVC plastic cables. It can be used in constant temperature water bath occasions specified in IEC 60811-402:2012, IEC502-83, etc. It is a plastic cable insulation test equipment.
Equipped with an insulation port, which allows wires and cables to be threaded.
Technical parameters:
1.Inner dimensions (L*W*H): 1500×500×1000mm
2.Temperature control range: room temperature ~ 100℃, user can preset the required test temperature from room temperature ~ 100℃, such as set at 70 ℃ or 90 ℃.
3.Temperature stability: <1.5℃
4.Electric heating power: 18KW
5.Insulation power: 5KW
6.Input voltage: AC 380V/50HZ
7.Temperature uniformity guarantee: high-precision instrument control, heat circulation pump circulation.
8.With Low water level alarm function, when there is lacking water, the heating tube will be powered off.
9.There are 12 holes on the cover, two of each 1,2,3,4,5,10 CM. Layout as follows:
10.Automatic water replenishment function.
11.LCD panel display with computer interface (485).
Usage: Please read the manual carefully before use. The user needs to be familiar with the instrument and the control panel, and use a megohmmeter to measure whether the power supply, plug, and grounding are poorly insulated or short-circuited. This device uses distilled water to heat the electrolyte at a constant temperature. River water and hard water are prohibited. If tap water is used, the thermostatic pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the thermostatic sensitivity.
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!