Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 100 PCS Per Month |
| Delivery Time | 3~5 Days |
| Packaging Details | Standard Exporting Boxed |
| Stop Face Diameter | SФ35±0.2 (mm) |
| Test Wire Length | 100±0.2 (mm) |
| Test Wire Diameter | Ф1+0.05 (mm) |
| Handle Diameter | Ф10 (mm) |
| Built-in Force | 1N force |
| Brand Name | Sinuo |
| Model Number | SN2210-4T |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
SS Electrical Appliance Tester IEC 60335-1 Clause 20.2 Similar To Test Probe B
Product Specification
| Payment Terms | T/T | Supply Ability | 100 PCS Per Month |
| Delivery Time | 3~5 Days | Packaging Details | Standard Exporting Boxed |
| Stop Face Diameter | SФ35±0.2 (mm) | Test Wire Length | 100±0.2 (mm) |
| Test Wire Diameter | Ф1+0.05 (mm) | Handle Diameter | Ф10 (mm) |
| Built-in Force | 1N force | Brand Name | Sinuo |
| Model Number | SN2210-4T | Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China | ||
| High Light | IEC61032 Test Probe D for IP4X verification ，Test Probe D with 1N force ，Electrical test probe for shock hazard verification | ||
IEC61032 Test Probe D with 1N Force For IP4X And Shock Hazard Verification
Product information:
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D, it is required by IEC 60335-1 clause 22.1, IEC60529 for IP4X, IEC60065 and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Customizable: It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). The probe whose model number is with "T" is with force.
Technical parameters:
|
Parameters /Model |
SN2210-4T |
|
Name |
Test rod probe D with 1N force |
|
Stop Face Diameter |
SФ35±0.2 (mm) |
|
Test Wire Length |
100±0.2 (mm) |
|
Test Wire Diameter |
Ф1+0.05 0 (mm) |
|
Handle Length |
100(mm) |
|
Handle Diameter |
Ф10 (mm) |
|
Built-in Force |
1N force |
|
Applied standard |
IEC60529 |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!