Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 days |
| Packaging Details | Plywood Case |
| Adjustable Platform | 100X100mm |
| Adjustable Stroke | 0-100mm |
| Test Station | 1 station |
| Terminals | Copper |
| Moving Electrode | φ3mm |
| Fixed Electrode | φ3mm |
| Output Voltage | 0–15 kV |
| Output Current | 0–2 mA |
| Brand Name | Sinuo |
| Model Number | SN1124 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
BS EN 12983-1 Cookware Coating Pencil Hardness Tester for Cookware Surface
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
Product Specification
| Payment Terms | T/T | Supply Ability | 20 Sets Per Month |
| Delivery Time | 30 days | Packaging Details | Plywood Case |
| Adjustable Platform | 100X100mm | Adjustable Stroke | 0-100mm |
| Test Station | 1 station | Terminals | Copper |
| Moving Electrode | φ3mm | Fixed Electrode | φ3mm |
| Output Voltage | 0–15 kV | Output Current | 0–2 mA |
| Brand Name | Sinuo | Model Number | SN1124 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC 60335-2-17 spark ignition tester ，electric blanket flame retardancy tester ，spark ignition test equipment for appliances | ||
IEC 60335-2-17 Spark Ignition Test Equipment for Electric Blanket Flame Retardancy
Product Overview:
This spark ignition test device is designed in full compliance with IEC 60335-2-17, Clause 30.101, Figure 112 & Figure 113.
It is specifically developed to evaluate the flame retardancy and arc ignition resistance of flexible heating appliances used for personal or bedding heating.
The equipment verifies whether arc discharge from live parts can cause overheating, ignition, or combustion of the outer covering material under elevated temperature conditions.
Applicable Test Samples:
Electric blankets
Heating pads
Other flexible electric heating appliances intended for heating beds or the human body
Test Objective:
The test aims to determine whether the outer covering materials of flexible heating appliances can withstand electrical arcing without causing flame propagation or hazardous overheating, ensuring compliance with IEC safety requirements.
Test Principle:
The specimen is placed inside a temperature-controlled heating chamber and conditioned at 65°C ± 2°C for 3 hours.
After conditioning, the sample is mounted on a standard-compliant electrode support, with the electrode gap precisely set to 6.0 mm ± 0.1 mm.
A 10 kV sinusoidal rated voltage is applied across the electrodes. An adjustable non-inductive resistor is connected in series to maintain a short-circuit current of 1 mA, while ensuring the output voltage drop does not exceed 100 V.
The power is applied for 2 minutes, and the time taken for the spark to reach the inner edge of the template is recorded.
The final result is determined by calculating the average ignition time in accordance with IEC 60335-2-17 requirements.
System Configuration:
The spark ignition test system consists of:
High-voltage control unit (including 10 kV power supply)
Heating chamber (optional)
Standardized test bracket assembly
Technical Parameters:
| Component | Description |
|---|---|
| Adjustable Platform | 100 × 100 mm, stroke 0–100 mm, heat-insulating material |
| Lower Template | Standard-made hardwood |
| Fixed Electrode | Ø3 mm, 45° inverted cone tip, brass |
| Upper Template | Standard-made hardwood or aluminum |
| Terminals | Copper |
| Moving Electrode | Ø3 mm cylindrical, flat top, brass |
| Electrode Gap | Adjustable, 6.0 ± 0.1 mm |
| Base | Thermal insulation material |
| Structure | Stainless steel, insulation materials, and brass components |
Control Unit Specifications:
| Item | Specification |
|---|---|
| Output Voltage | 0–15 kV |
| Output Current | 0–2 mA |
| Short-Circuit Condition | 1 mA with voltage drop ≤ 100 V |
| Test Time Setting | 0–9999 s (presettable) |
| Time Recording | 0–9999 s (spark to inner template edge) |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!