Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 5 sets per month |
| Delivery Time | 30 days |
| Packaging Details | Plywood case |
| Test Items | Durability test of insulated cabinet drawers |
| Test Station | Single station |
| Mechanical Arms | Two drawer-opening/closing manipulators |
| Test Travel | 0–470 mm |
| Drawer Speed | 5–15 cycles/min |
| Cycle Count | 0–999999 |
| Brand Name | Sinuo |
| Model Number | SN1201B |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
BS EN 12983-1 Cookware Coating Pencil Hardness Tester for Cookware Surface
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
Product Specification
| Payment Terms | T/T | Supply Ability | 5 sets per month |
| Delivery Time | 30 days | Packaging Details | Plywood case |
| Test Items | Durability test of insulated cabinet drawers | Test Station | Single station |
| Mechanical Arms | Two drawer-opening/closing manipulators | Test Travel | 0–470 mm |
| Drawer Speed | 5–15 cycles/min | Cycle Count | 0–999999 |
| Brand Name | Sinuo | Model Number | SN1201B |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IEC62552 freestanding warming drawers tester ，warming drawers durability testing equipment ，electrical appliance testing apparatus with warranty | ||
IEC62552:2015 Freestanding Warming Drawers Durability Testing Apparatus
Product information:
The Freestanding Warming Drawers Durability Testing Apparatus is designed according to customer-specific requirements. It is intended for vertical drawer durability testing of upright insulated cabinets. This fully automated test equipment is suitable for certification bodies, factory laboratories, and other testing departments.
The system uses a mature PLC intelligent control system, equipped with adjustable motion execution mechanisms and dedicated fixtures. A color LCD touchscreen is standard, allowing pre-setting of test travel, speed, cycle count, and door opening/closing dwell time. This enables realistic simulation of manual drawer operation with intelligent, multi-functional control.
Principle:
1. Opening: A servo motor drives the mechanical arm, which slowly pulls the drawer handle fixture with a soft rope or uses a suction cup attached to the drawer door, opening the drawer to 15–20 mm before fully open. Maximum drawer opening distance: 470 mm.
2. Closing: The servo motor drives the mechanical arm to push the pressure roller, causing the drawer to close from 15–20 mm before full open to fully closed.
3. Cycle Definition: One open-and-close sequence counts as one cycle. The process repeats automatically until the preset number of test cycles is reached, at which point the system stops.
Structure:
Overall frame structure, with samples placed on a platform to reduce equipment vibration and relative motion-induced stress. The base platform supports vertical columns containing two drawer mechanisms (upper and lower), which are adjustable to accommodate drawers at different positions.
Technical parameters:
|
No. |
Item |
Parameters |
|
1 |
Power Supply |
AC 220V, 50Hz, 2 kW |
|
2 |
Electrical Control |
PLC Intelligent Control |
|
3 |
Operation Interface |
7-inch color touchscreen HMI |
|
4 |
Drive |
Servo motor |
|
5 |
Test Sample Range |
WDH = (0.2~1.0 m)×(0.2~1.0 m) × (0.2~1.0 m)
|
|
6 |
Test Items |
Durability test of insulated cabinet drawers |
|
7 |
Test Station |
Single station, capable of testing one cabinet, with independent or simultaneous upper and lower drawer operation |
|
8 |
Columns |
One column on the platform, with integrated lifting mechanism; two independent adjustable mechanical arms mounted on the column |
|
9 |
Mechanical Arms |
Two drawer-opening/closing manipulators mounted on column guide rails |
|
10 |
Suction/Grip Fixtures |
1) Handle fixture ×2 2) Suction cup ×2 (for handle-less drawers) |
|
|
Test Travel |
0–470 mm, adjustable via touchscreen |
|
|
Drawer Speed |
5–15 cycles/min, adjustable via touchscreen |
|
|
Dwell Time |
Adjustable 0–99999.9 s via touchscreen |
|
|
Drawer Cycle Count |
0–999999, automatic stop at preset count; displays completed and remaining cycles; pause/resume supported |
|
|
Cabinet Positioning Fixtures |
3 sets, to fix side and back of cabinet |
|
|
Protection |
Emergency stop, leakage, short-circuit, overload; protective mesh for glass breakage risk |
|
|
Machine Dimensions & Weight |
Frame: 1500×1800×1400 mm, about 200 kg; Control Cabinet: 600×600×1400 mm, about 100 kg |
|
|
Column Travel |
Arm forward/backward: 0–470 mm (two independent); vertical adjustment: Lower arm 200–500 mm, Upper arm 500–1000 mm
|
|
|
Base Platform |
1500×1800 mm |
|
|
Drawer Load |
Supplied by customer |
System Unit Introduction:
The system is modular, designed and manufactured strictly according to standards while maximizing standardization of components, ensuring optimal performance and technical support. Servo motors provide high reliability and long service life. The system is compact, visually appealing, and easy to maintain.
4.1 Manipulator Unit
4.1.1 Contains two drawer-opening/closing manipulators.
4.1.2 Fixed to the vertical column on the base platform; arms are vertically adjustable to match different drawer positions.
4.1.3 Composed of servo motor + precision slide + dedicated fixture. Program-controlled servo drives the fixture along the slide to perform linear motions, achieving repeated drawer open/close cycles.
4.2 Frame
Steel platform with sample fixtures.
Three sample fixtures on the platform, with rubber pads at ends to prevent sample damage.
4.3 Intelligent Electrical Control System
4.3.1 Includes control cabinet, control circuits, operation panel, and core control components.
4.3.2 PLC intelligent control (Mitsubishi) and 7-inch color touchscreen.
4.3.3 System software developed in-house; test speed, cycle count, and travel distance can be preset on touchscreen, fully meeting standard requirements.
Main Configuration:
|
Type |
Name |
Model/Spec |
Qty |
Unit |
Brand/Manufacturer |
|
Electrical Control |
Touchscreen Controller |
Weinview |
1 |
Set |
Korea |
|
PLC |
Mitsubishi |
1 |
Set |
Japan |
|
|
Leakage Protection Circuit Breaker |
63A |
1 |
Pc |
Chint |
|
|
Switch/Button/Indicator |
22mm |
Several |
Pc |
Chint HK |
|
|
Relay |
2J,4J |
Several |
Set |
Omron |
|
|
Switch Power Supply |
S150 |
1 |
Set |
Mean Well |
|
|
Suction Cup |
|
2 |
Set |
China |
|
|
Structure |
Servo Motor |
/ |
2 |
Set |
China |
|
Drive |
/ |
2 |
Set |
China |
|
|
Fixture |
/ |
3 |
Set |
|
|
|
Frame |
/ |
1 |
Set |
|
|
|
Software |
Program |
/ |
1 |
Set |
|
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!