Sinuo Testing Equipment Co. , Limited
| Applied Standard | IEC 60335-2-30 |
| Item Dimensions | 760 × 470 × 470 mm |
| Item Material | Black Plywood |
| Plywood Thickness | Approx. 20 mm |
| Applied Clause | Clause 11.2 Figure 103 |
| Supply Ability | 20 Sets Per Month |
| Hole Diameter | 15 mm |
| Payment Terms | T/T |
| Packaging Details | Plywood Case |
| Delivery Time | 20 days |
| Certification | Calibration Certificate (Cost Additional) |
| Brand Name | Sinuo |
| Model Number | SN1102D |
| Place of Origin | China |
View Detail Information
Explore similar products
BS EN 12983-1 Cookware Coating Pencil Hardness Tester for Cookware Surface
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
Product Specification
| Applied Standard | IEC 60335-2-30 | Item Dimensions | 760 × 470 × 470 mm |
| Item Material | Black Plywood | Plywood Thickness | Approx. 20 mm |
| Applied Clause | Clause 11.2 Figure 103 | Supply Ability | 20 Sets Per Month |
| Hole Diameter | 15 mm | Payment Terms | T/T |
| Packaging Details | Plywood Case | Delivery Time | 20 days |
| Certification | Calibration Certificate (Cost Additional) | Brand Name | Sinuo |
| Model Number | SN1102D | Place of Origin | China |
| High Light | IEC60335-2-30 Room Heater Temperature Tester ，Room Heater Temperature Tester ，Room Heater Surface Temperature Rise Tester | ||
This test corner conforms to the standard requirement of Clause 11.2, Figure 103 of IEC 60335-2-30:2009+AMD1:2016 +AMD2: 2021.
This test box is made of dull black-painted plywood approximately 20 mm thick. The wall A can be positioned at different distances from the far end of the test box.
The test box is placed in the test corner, with side B against one wall of the test corner and the sloping end of the test box against the other wall. The test corner shall be at least 470 mm wide, 760 mm deep and 470 mm high.
The cab heater is placed in the test box in the most unfavourable position according to the manufacturer's instructions, if it will fit into the test box, and with the distance L = 0 mm. The shortest distance to the wall of the test box shall not be less than that stated in the manufacturer's instructions for the shortest permissible distance between the heater outlet and the interior surfaces of the motor vehicle. The wall A of the test box may be moved to increase L to a maximum distance L= 220 mm.
If the manufacturer has not supplied any instructions for the placing of the cab heater or if the heater cannot fit in the test box, the cab heater is placed in the most unfavourable position on the floor of the test corner. Heaters containing PTC heating elements are placed away from the walls if this will lead to higher temperatures.
The temperature rise of the felt pad is determined by means of thermocouples attached to small blackened disks of copper or brass, 15 mm in diameter and 1 mm thick. The disks are placed on the surface of the pad.
The probe may be held in place using a laboratory stand clamp or similar device. Any measuring instrument giving the same results as the probe may be used.
| Item | Specification |
|---|---|
| Standard | IEC 60335-2-30:2009 + AMD1:2016 + AMD2:2021 |
| Dimensions | 760 × 470 × 470 mm |
| Material | Plywood |
| Plywood Thickness | Approx. 20 mm |
| Drilling Interval | 100 mm |
| Hole Diameter | 15 mm |
| Surface Treatment | Painted black inside and outside |
Company Details
Business Type:
Manufacturer
Total Annual:
2000000 USD-3000000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
We Turn Testing Standards into Working Test Systems Sinuo designs and manufactures testing equipment and integrated laboratory systems for manufacturers, quality inspection institutes, independent laboratories, research organizations and universities. With more than 15 years of testing-equipment ... We Turn Testing Standards into Working Test Systems Sinuo designs and manufactures testing equipment and integrated laboratory systems for manufacturers, quality inspection institutes, independent laboratories, research organizations and universities. With more than 15 years of testing-equipment ...
Get in touch with us
Leave a Message, we will call you back quickly!