Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Working Temperature | 0 – 40℃ |
| Delivery Time | 30 Working Days |
| Test Rate | 10 cycles / min |
| Swing Angle | Horizontal: 90°; Vertical: 120° |
| Working Humidity | 30% – 90% |
| Supply Ability | 10 Sets/Month |
| Packaging Details | Plywood Case |
| Net Weight | 130 kg |
| Applied Standard | IEC60335-2-15 |
| Model Number | SN1133 |
| Certification | Calibration Certificate(Cost Additional) |
| Brand Name | Sinuo |
| Place of Origin | China |
View Detail Information
Explore similar products
BS EN 12983-1 Cookware Coating Pencil Hardness Tester for Cookware Surface
75g Test Punch With 60° Conical Tungsten Carbide Tip IEC60335-2-24 Clause 22.116
IEC 60335-2-23 Skin or Hair Care Appliance Swivel Connection 50 r/min Rotation
IEC 60335-1 Oxygen Bomb Aging Test Chamber 4000cm3 Stainless Steel Air Bomb Tank
Product Specification
| Payment Terms | T/T | Working Temperature | 0 – 40℃ |
| Delivery Time | 30 Working Days | Test Rate | 10 cycles / min |
| Swing Angle | Horizontal: 90°; Vertical: 120° | Working Humidity | 30% – 90% |
| Supply Ability | 10 Sets/Month | Packaging Details | Plywood Case |
| Net Weight | 130 kg | Applied Standard | IEC60335-2-15 |
| Model Number | SN1133 | Certification | Calibration Certificate(Cost Additional) |
| Brand Name | Sinuo | Place of Origin | China |
| High Light | IEC 60335-2-15 kettle handle tester ，kettle handle strength testing equipment ，mechanical strength tester for kettles | ||
IEC 60335-2-15 Kettle Handle Strength Tester Dual Station Swing Endurance Test
The SN1133 Kettle Handle Strength Test Apparatus is dual‑station lab testing equipment built to verify mechanical durability of electric kettle handles and their fastening assemblies. It executes horizontal and vertical cyclic swing tests as specified in IEC 60335‑2‑15:2024 clause 21.101, figure 109 & 110, preventing safety risks caused by unexpected handle fracture during end‑user daily operation. Manufactured in Guangzhou China, this compliance tester serves household appliance factories, third‑party testing laboratories and quality inspection institutes for pre‑market product validation.
Purpose:SN1133 Kettle Handle Strength Test Apparatus is designed for kettle sample testing in compliance with IEC 60335‑2‑15:2024 clause 21.101, figure 109 and 110. It evaluates the mechanical strength of kettle handles and their fastening assemblies, verifying that handles will not break unexpectedly during normal operation so as to avoid potential safety hazards for end‑users.
Test Principle:Controlled by PLC system and touch‑screen interface, servo‑motor drives swing arm mechanism to perform cyclic horizontal and vertical swing endurance tests. The kettle sample is loaded with steel balls of 1.2 times rated capacity. A 5 mm rubber pad with Shore hardness 50±10 is fitted between fixture and kettle handle.
1.Horizontal Swing Test: The kettle swings within 90° range for 2500 cycles at 10 cycles per minute. One full cycle runs from 0° to 90° and returns to 0°, with uniform acceleration and deceleration controlled by servo motor.
1.Vertical Swing Test: The kettle swings within 120° range for 5000 cycles at 10 cycles per minute. One full cycle runs from 0° to 120° and returns to 0°, with servo‑motor uniform acceleration & deceleration.
Technical Specifications
| Category | Item | Specification |
|---|---|---|
| Performance Index | Test Stations | Combined type, 2 stations (1 horizontal + 1 vertical) |
| Electrical Control | PLC intelligent electrical control, touch‑screen operation | |
| Drive Mode | Motor drive + precision reducer transmission | |
| Test Items | Horizontal | Kettle handle horizontal endurance test |
| Vertical | Kettle handle vertical endurance test | |
| Main Technical Parameters | Test Rate | 10 cycles / min |
| Swing Angle | Horizontal: 90°; Vertical: 120° | |
| Test Cycle Count | 0 – 999999 cycles, preset via touch‑screen | |
| Kettle Handle Fixture | Universal fixture, screw fastening, with rubber pad of 5 mm thickness, Shore hardness 50 ± 10 | |
| Load | 3 kg stainless‑steel balls | |
| Safety Protection | – | Electric leakage protection, motor overload protection |
|
|
Structure | Dual‑station design: horizontal movement station (left) + vertical movement station (right), mobile base with casters |
| Dimension (W×H×D) | Approx. 1500 × 1000 × 1250 mm | |
| Net Weight | 130 kg | |
|
|
Power Supply | AC 220V ±10% / 50‑60Hz, 3 kW |
| Working Temperature | 0 – 40℃ | |
| Working Humidity | 30% – 90% |
Company Details
Business Type:
Manufacturer
Total Annual:
2000000 USD-3000000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
We Turn Testing Standards into Working Test Systems Sinuo designs and manufactures testing equipment and integrated laboratory systems for manufacturers, quality inspection institutes, independent laboratories, research organizations and universities. With more than 15 years of testing-equipment ... We Turn Testing Standards into Working Test Systems Sinuo designs and manufactures testing equipment and integrated laboratory systems for manufacturers, quality inspection institutes, independent laboratories, research organizations and universities. With more than 15 years of testing-equipment ...
Get in touch with us
Leave a Message, we will call you back quickly!