Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Squeeze stroke | 0~300MM |
| Temperature fluctuation | ±2.0℃ |
| Delivery Time | 30 Days |
| Cooling rate | Average 1℃/min |
| Speed accuracy | 1mm |
| Force range | 1kg-200kg |
| Analytical accuracy | 0.1℃ |
| Supply Ability | 5 Sets Per Month |
| Force accuracy | ≤0.5％ |
| Temperature range | 0 ~ 100℃ |
| Packaging Details | Plywood case |
| Low temperature | 0℃ |
| Heating rate | Average 3℃/min |
| Model Number | SN5513 |
| Certification | Calibration Certificate (Cost Additional) |
| Brand Name | Sinuo |
| Place of Origin | Sinuo |
View Detail Information
Explore similar products
High Voltage High Current EV Power Battery Detection System for Automotive Large
15V/10A 30V/10A Primary Dry Batteries Capacity Test Equipment Charge Discharge
Charge Discharge Battery Testing Equipment Explosion Proof Safety Stainless
IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting
Product Specification
| Payment Terms | T/T | Squeeze stroke | 0~300MM |
| Temperature fluctuation | ±2.0℃ | Delivery Time | 30 Days |
| Cooling rate | Average 1℃/min | Speed accuracy | 1mm |
| Force range | 1kg-200kg | Analytical accuracy | 0.1℃ |
| Supply Ability | 5 Sets Per Month | Force accuracy | ≤0.5％ |
| Temperature range | 0 ~ 100℃ | Packaging Details | Plywood case |
| Low temperature | 0℃ | Heating rate | Average 3℃/min |
| Model Number | SN5513 | Certification | Calibration Certificate (Cost Additional) |
| Brand Name | Sinuo | Place of Origin | Sinuo |
| High Light | JISC8714 Lithium Ion Tester ，JISC8714 Cells Internal Short Circuit Tester ，Lithium Ion Cells Short Circuit Tester | ||
| Parameter | Specification |
|---|---|
| Temperature range | 0 ~ 100℃ |
| Analytical accuracy | 0.1℃ |
| Temperature fluctuation | ±2.0℃ |
| Low temperature | 0℃ |
| Heating rate | Average 3℃/min (from 0℃ to 100℃, non-linear no-load) |
| Cooling rate | Average 1℃/min (from 100℃ to 0℃, non-linear no-load) |
| Heater | Fin type heat pipe shaped stainless steel electric heater |
| Air supply circulation system | Convection air circulation system |
| Safety devices | Over-temperature alarm, MCCB overload protection, etc. |
| Insulation material | Rigid polyurethane foam + high-efficiency compressed glass wool |
| Thermostat | TEMMI controller imported from Korea |
| Inner chamber size | W400*H500*D500mm |
| Inner chamber material | Mirror stainless steel plate, bottom reinforcement |
| External chamber size | W1200 X H2000 X D1000MM |
| External chamber material | Cold rolled steel paint treatment |
| Parameter | Specification |
|---|---|
| Force range | 1kg-200kg |
| Unit | Kg/N/Lb |
| Squeeze stroke | 0~300MM |
| Force display accuracy | 1N |
| Resolution | 1/10,000 |
| Force accuracy | ≤0.5％ |
| Speed display accuracy | 1mm |
| Driven type | Servo motor drive |
| Squeeze speed | The squeeze speed is adjustable. The speed of the first contact point during squeeze can be set to 1.5cm/s; the test process speed range is 0.01~900MM/MIN (adjustable, 0.1~1.5CM/S) |
| Squeeze head size | 10*10*5mm or 10*10*2mm |
| Squeeze head material | One piece each of nitrile rubber (NBR, side 10mm, thickness 2mm) and acrylic (acryl, side 5mm, thickness 2mm) |
| Squeeze workbench material | Aluminum alloy plate or 316 stainless steel plate, corrosion resistant |
| Suitable Battery size | 300 X 300 X 300mm(WXDXH) |
| Visual window | 300 X 300mm explosion-proof glass |
| Air supply outlet | There are two air supply vents on the left side of the box. |
| Lighting | There is a lighting lamp inside the box, which can illuminate the entire testing space |
| Voltage collection range | 0-100V, acquisition frequency 100HZ/second |
| Voltage resolution | 0.1mv |
| Voltage acquisition frequency | 100/s |
| Deformation range | 0-300MM |
| Max. test plane | 300X300MM |
| Power supply | 220V 50HZ |
| Power | 2.0KW |
| Machine weight | Approx.350KG |
| Feature | Specification |
|---|---|
| Size | Appearance size: 203x148x35mm (length x width x thickness), Installation opening size: 190x135mm (length x width) |
| Display | TFT LCD (LED backlight), 7-inch 260,000-color LCD screen and touch screen, resolution 800 * 480 |
| Control method | Program: 120 groups of programs, each group has 100 segments. You can set all programs to cycle, part to cycle, program connection, program end action, and standby action. Fixed value: The running time can be set. |
| Sensor input | Sensor type: temperature PT100, humidity PT100; Input the maximum error: temperature (±0.2℃), humidity (±1%RH); Measuring range: temperature -100.0~300.0℃, humidity: 0.0~100.0%RH; Optional functions: 1-5V, 4-20mA, T-type, K-type and other sensor inputs |
| Analog output | Voltage pulse (SSR): 2 points (temperature, humidity), DC 24V, minimum pulse width 5ms; Optional functions: 4-20mA output, 1-5V output |
| Contact input | Input type: DI1 ~ DI10: Each error message name can be changed, and Chinese input can be entered. Pictures can be set to display fault information. Contact usage: Maximum DC 24V/10mA. Can be set to run/stop/forward/reverse action, DI delay action time can also be set. |
| Contact output | Number of contacts: maximum 16 contacts, 4 normally open and normally closed contacts; Contact capacity: Normally open contact: Maximum 30V DC/5A, 250V AC/5A; Normally closed contact: 30V DC/5A maximum, 250V AC/5A; Output types: IS signal: 10 points, user signal: 1 point, TS signal: 6 points, alarm signal: 8 points, T signal: 8 points, H signal: 4 points, temperature and humidity operating signal: 2 points, temperature and Humidity operation rise/maintain/fall: 6 points, drainage signal: 1 point, error signal: 1 point, end signal: 1 point, 1REF signal: 1 point, 2REF signal: 1 point, EVT signal: 4 points |
| USB function | Connect U disk to record test data in real time, export test history data, and import pictures |
| Power supply | Power supply: Rated voltage: DC 24V/500mA; Lithium battery: for internal real-time clock (minimum 10 years) |
| Communication | Communication type: RS232, maximum communication speed 115200bps, (optional RS485, maximum communication distance 1.2km, up to 99 units can be connected). Control method: The controller output signal passes through the SSR solid state relay to achieve high-precision non-contact switch control |
| Feature | Description |
|---|---|
| Control System | PLC control, accurate data, simple operation |
| Air pressure balancing system | Double holes for air supply to ensure the air pressure balance in the test chamber |
| Exhaust system | The long-axis motor drives the aluminum alloy fan blades, which can discharge the exhaust gas generated by the test to the outdoors at any time |
| Security system | Stainless steel hinges and tight door locks ensure that the door will not be blown open during strong airflow |
| Humanized design | 1) The height of the extrusion table from the ground is about 800MM, which is convenient for test operations. 2) Double-layer tempered glass window ensures safety while testers can observe the test conditions through the window 3) Built-in environmentally friendly and energy-saving lights illuminate the entire testing space for clear observation. |
| Voltage acquisition system | It can collect the voltage of the test battery in real time. After the collection is completed, the test data can be exported via USB to generate EXCELL file format, or it can be directly exported to BMP file format to facilitate data statistics and transmission. |
| Transmission system | The servo motor cooperates with the ball screw and linear guide to move the extrusion tooling up and down. |
| Base | Equipped with 4 universal pulleys and 4 positioning foot cups, which can be moved freely or positioned |
Company Details
Business Type:
Manufacturer
Total Annual:
2000000 USD-3000000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
.gtr-container-f7h2j9k1 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333333; line-height: 1.6; padding: 20px; box-sizing: border-box; border: none !important; } .gtr... .gtr-container-f7h2j9k1 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333333; line-height: 1.6; padding: 20px; box-sizing: border-box; border: none !important; } .gtr...
Get in touch with us
Leave a Message, we will call you back quickly!