Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Drop Height | 0–500 mm |
| Equivalent Mass | 1.7 kg, 5 kg ± 1% |
| Delivery Time | 30 Days |
| Tube Diameter | 15.9 mm |
| Impact Height | 300 - 2000mm |
| Release Method | Electromagnetic release |
| Height Range | 200–2500 mm |
| Supply Ability | 20 Sets Per Month |
| Lifting Method | Motorized |
| Impact Energy | 5, 20J |
| Packaging Details | Plywood Case |
| Swing Tube Length | 1000 mm |
| Model Number | SNQC1008B |
| Certification | Calibration Certificate (Cost Additional) |
| Brand Name | Sinuo |
| Place of Origin | China |
View Detail Information
Explore similar products
Automotive Plugs Vehicle Connectors Cable Anchorage Pull Force and Torque Test
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test
IEC 62196-1 Rewireable Plugs And Vehicle Connector Drop Testing Equipment
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
Product Specification
| Payment Terms | T/T | Drop Height | 0–500 mm |
| Equivalent Mass | 1.7 kg, 5 kg ± 1% | Delivery Time | 30 Days |
| Tube Diameter | 15.9 mm | Impact Height | 300 - 2000mm |
| Release Method | Electromagnetic release | Height Range | 200–2500 mm |
| Supply Ability | 20 Sets Per Month | Lifting Method | Motorized |
| Impact Energy | 5, 20J | Packaging Details | Plywood Case |
| Swing Tube Length | 1000 mm | Model Number | SNQC1008B |
| Certification | Calibration Certificate (Cost Additional) | Brand Name | Sinuo |
| Place of Origin | China | ||
| High Light | Conductive Charging Test Equipment ，IEC 61851-1 Test Equipment ，IK Code Test Equipment | ||
This equipment is used for conducting mechanical strength tests on electric vehicle charging piles or distribution cabinets for charging vehicles.
According to test Eha: The pendulum and impact element are released freely through a 1-meter pendulum tube at a certain height. They impact the sample at the lowest point in the vertical direction. Through the conversion of gravitational potential energy to kinetic energy, the purpose of impact testing on the sample is achieved.
According to test Ehc: The vertical drop hammer, the impact element is dropped vertically from a stationary state through a conduit onto the horizontal surface of the sample. Through the conversion of gravitational potential energy to kinetic energy, the purpose of impact testing on the sample is achieved.
PLC control, touchscreen operation, lifting control, release control are all integrated in the touchscreen operation. Remote operation via infrared remote control is also available.
Note: The size of the charging piles installed on the sample platform shall not exceed WDH = 1*1*2.0m. Floor-standing charging piles shall not exceed 2.5m.
Drive: The lifting is driven by a motor and a reducer, while the release is achieved by an electromagnet.
Transmission: Precision ball screw + linear guide rail
| Anti-impact secondary effect function | Yes, there is an automatic locking rebound swing tube, ensuring that no secondary impact will occur. |
| Swing tube lifting and lowering method | Motor drive, touchscreen input of height value |
| Pendulum release method | Electromagnet release, one-click release |
| Pendulum impact energy | 5, 20J energy (IK08, IK10 levels) |
| Pendulum impact element Equivalent mass | 1.7 kg, 5 kg ± 1%, achieving equivalent mass when combined with the oscillating tube |
| Swing tube | Steel pipe with a length of 1000 mm and an outer diameter of 15.9 mm (5, 20J) |
| Impact height position of the sample | Electrically adjustable up and down, stroke range 300 - 2000 mm, controlled by touch screen |
| Drop height | 0 - 500mm, with scale display, adjustable impact angle |
| Drop hammer lifting and lowering method | Motor drive, touchscreen input of height value |
| Drop hammer release method | Electromagnet release, one-click release |
| Drop-weight impact energy | 5, 20J energy (IK08, IK10 levels) |
| Drop hammer impact element Equivalent mass | 1.7 kg, 5 kg ± 1%, the equivalent mass of the falling hammer is equal to its own weight |
| Catheter | 5J and 20J drop hammer conduits each one |
| Base plate | Thickened load-bearing steel base plate |
| Impact height position of the specimen | Up and down electrically adjustable, travel range 300 - 2000mm, controlled by touch screen |
| Impact horizontal position of the specimen | Adjustable drop hammer mechanism extension position to achieve the purpose of impacting different points on the top surface |
| Drop height of the falling hammer | 0 - 500mm, touchscreen display. By using the touchscreen buttons, after the initial contact, the setting height can be adjusted. |
| Size | 1.0 * 1.2 meters, capable of holding 1 * 1 meter samples |
| Base plate | 10mm thick, with threaded installation holes arranged on the top for sample mounting |
| Column | Install the column and match it with the backplate for sample mounting |
| Fast connection separation structure | It can be connected and separated with the impact frame. When conducting small sample tests, it is used in the connected mode; when conducting large-scale DC piles, it is used in the separated mode. |
| Function | Motor overload protection Emergency stop protection Equipped with three-color indicator lights: yellow - indicates standby state, green - indicates running state, red - indicates alarm state. Real-time status indication is provided. Leakage protection |
| Movement mode | The impact frame and sample platform are equipped with supporting and roller-type feet, which are movable and can be locked to secure the support to the ground. |
| Energy / J | ≤1 ±10% | 2 ±5% | 5 ±5% | 10 ±5% | 20 ±5% | 50 ±5% |
|---|---|---|---|---|---|---|
| Equivalent mass ± 2% kg | 0.25(0.2) | 0.5 | 1.7 | 5 | 5 | 10 |
| Materials | Nylon | Steel | ||||
| R/mm | 10 | 25 | 25 | 50 | 50 | 50 |
| D/mm | 18.5(20) | 35 | 60 | 80 | 100 | 125 |
| f/mm | 6.2(10) | 7 | 10 | 20 | 20 | 25 |
| r/mm | - | - | 6 | - | 10 | 17 |
| l/mm | According to the equivalent quality-adjusted value, see Appendix A | |||||
| Energy/Joule | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Equivalent mass/kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Drop height ± 1% mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 400 | 300 | 200 | 400 | 500 |
| IK code | IK00 | IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 | IK11 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Collision energy / J | a | 0.14 | 0.2 | 0.35 | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 |
Company Details
Business Type:
Manufacturer
Total Annual:
2000000 USD-3000000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
.gtr-container-f7h2j9k1 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333333; line-height: 1.6; padding: 20px; box-sizing: border-box; border: none !important; } .gtr... .gtr-container-f7h2j9k1 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333333; line-height: 1.6; padding: 20px; box-sizing: border-box; border: none !important; } .gtr...
Get in touch with us
Leave a Message, we will call you back quickly!