Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
Your message must
be between 20-3,000 characters!
Submit Requirement
Thank You!
Your requirement has been sent. we will contact you quickly!
{"title":"IEC 61058-1 Clause 17 Motor Surge Load Cabine for Switch Endurance Testing Surge","imgUrl":"https:\/\/img.chinax.com\/nimg\/ea\/bb\/01da5f396e767309a4ed7b8fbcbf-200x200-1\/iec_61058_1_clause_17_motor_surge_load_cabine_for_switch_endurance_testing_surge.jpg","attrs":{"Control System":"PLC control","Model Number":"SN2117M","Rated Current Range":"1\u201330 A","Minimum Order Quantity":"1"}}
{"title":"100mm Drop Tester EN 71-1 Toys 1KG Impact Strength Test Apparatus","imgUrl":"https:\/\/img.chinax.com\/nimg\/93\/82\/0ec3986a1c30bebb4fbb87b37bac-200x200-1\/100mm_drop_tester_en_71_1_toys_1kg_impact_strength_test_apparatus.jpg","attrs":{"Brand Name":"Sinuo","Model Number":"SN2401","Certification":"Calibration Certificate (Cost Additional)","Place of Origin":"China"}}
{"title":"IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball","imgUrl":"https:\/\/img.chinax.com\/nimg\/c7\/23\/b257cbcfac028292085b5f84875f-200x200-1\/iec60884_1_switch_life_tester_for_insulation_parts_thermal_resistance_20n_ball_pressure_test.jpg","attrs":{"Brand Name":"Sinuo","Model Number":"SN2137","Certification":"Calibration Certificate (Cost Additional)","Place of Origin":"China"}}
{"title":"Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test","imgUrl":"https:\/\/img.chinax.com\/nimg\/6e\/55\/0ca828a44bcd3762c122f9e273c4-200x200-1\/switches_intended_for_self_ballasted_lamp_loads_automatic_breaking_capacity_test_system.jpg","attrs":{"Brand Name":"Sinuo","Model Number":"SN2117F","Certification":"Calibration Certificate (Cost Additional)","Place of Origin":"China"}}
{"title":"Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets","imgUrl":"https:\/\/img.chinax.com\/nimg\/85\/e6\/1feb20fbd8c0ac58bb875d322299-200x200-1\/resistive_inductive_capacitive_load_cabinet_for_switches_plugs_and_sockets_breaking_capacity_test.jpg","attrs":{"Brand Name":"Sinuo","Model Number":"SN2117","Certification":"Calibration Certificate (Cost Additional)","Place of Origin":"China"}}
{"title":"IEC 60065 230\u00b0 Rotating Angle Corrosion-resistance Metal Mandrel Test Apparatus","imgUrl":"https:\/\/img.chinax.com\/nimg\/da\/26\/b87536fa678a5f89d9a59f5f0ae7-200x200-1\/iec_60065_230_c2_b0_rotating_angle_corrosion_resistance_metal_mandrel_test_apparatus.jpg","attrs":{"Brand Name":"Sinuo","Model Number":"SN2204","Certification":"Calibration Certificate (Cost Additional)","Place of Origin":"China"}}
{"title":"IEC 60950 Clause 2.3.5 Switch Life Testing Machine 130A Test Generator","imgUrl":"https:\/\/img.chinax.com\/nimg\/3e\/bf\/f3b1ff660fb3130a4063708040f9-200x200-1\/iec_60950_clause_2_3_5_switch_life_testing_machine_130a_test_generator.jpg","attrs":{"Brand Name":"Sinuo","Model Number":"SN130A","Certification":"Calibration Certificate (Cost Additional)","Place of Origin":"China"}}
IEC 61058-1 Clause 17 Motor Surge Load Cabinet for Switch Endurance Testing Surge Current 180A
Product Overview
The SN2117M Motor Surge Load Cabinet is a dedicated electrical load testing system developed for evaluating the making and breaking capacity, electrical endurance and operational durability of switches controlling motor and inductive loads.
The system is designed around the requirements of IEC 61058-1 Clause 17 and related national standards. It generates a controlled motor-starting surge current of up to 6 times the rated current, while maintaining a specified power factor of 0.6-0.65. After the initial surge event, the equipment can automatically transition to the defined rated-load condition for continued endurance testing.
By combining resistive and inductive loading in one cabinet, the SN2117M eliminates the need for operators to manually reconfigure individual load components during the test. A PLC-based control system and 7-inch color touchscreen HMI provide centralized control of voltage, current, power factor, energization time and cycle count.
The cabinet is suitable for testing appliance switches, motor-control switches, contactors, protectors, motor controllers and other switching components subjected to motor starting current and repeated electrical loading.
Applicable Standards
GB 15092.1‑2020 Switches for appliances‑Part 1: General requirements, Clause 17 IEC 61058‑1:2016 Switches for appliances Part 1: General requirements, Clause 17 GB 16915.1‑2024 Switches for household and similar fixed‑electrical installations‑Part 1: General requirements IEC 60669‑1:2020 Switches for household and similar fixed‑electrical installations ‑ Part 1: General requirements
Test Samples
The load cabinet is intended for switching devices falling within the relevant classifications, including:
Control switches for resistive loads
Control switches for motor loads
Control switches for special locked-rotor motor-load circuits with power factor ≥0.6
Control switches for inductive-load circuits
Appliance switches
Motor-control switches
Contactors
Protectors
Motor controllers and similar switching components
Key Features
6× Motor Starting Surge Simulation
The system provides a 1-180 A surge-current range, allowing the test laboratory to reproduce high inrush conditions associated with motor starting.
Controlled Power Factor
The inductive loading section can be configured to achieve a test power factor of approximately 0.6-0.65, supporting motor-load switching test requirements.
Automatic Load Switching
The equipment combines resistive and inductive load sections and can switch between different loading conditions without requiring manual reconfiguration of the load cabinet.
PLC + Touchscreen Control
A PLC-based control architecture and 7-inch color touchscreen HMI allow operators to configure and monitor the principal test parameters from a centralized interface.
Programmable Test Cycles
The cycle counter can be preset from 0 to 999,999 cycles, making the system suitable for both short functional tests and extended electrical endurance evaluations.
Built-in Electrical Protection
Multiple protection functions are integrated into the load cabinet to improve operational safety and help protect the equipment during abnormal electrical conditions.
The equipment should be installed in a suitable laboratory environment meeting the following conditions:
Environmental Parameter
Requirement
Atmospheric Pressure
80-106 kPa
Ambient Temperature
5-40°C
Relative Humidity
20-80% RH
Power Supply
AC 220 ±5%, 50 Hz
Installation Condition
Stable installation with good heat dissipation
Vibration
Free from severe vibration and shaking
Electromagnetic Environment
Free from strong electromagnetic interference
Dust
No heavy dust accumulation
Gas Environment
Free from explosive and corrosive gases
Test Procedure
The SN2117M is operated together with an external test fixture that controls the opening and closing action of the device under test.
Step 1 — Connect the Test Circuit
Connect the load cabinet output terminals to the test fixture and wire the test sample according to the required test circuit.
Step 2 — Power Up the System
Switch on the main power supply and activate the equipment through the control-panel power switch.
Step 3 — Configure Motor Surge Load
Set the required surge current and power factor through the touchscreen HMI. The inductance and current settings can then be adjusted to achieve the specified electrical conditions.
Step 4 — Verify Surge Conditions
Start the inductive load manually and check the actual current and power factor against the target values. If adjustment is required: - Increasing inductance → higher power factor and lower current - Decreasing inductance → lower power factor and higher current
Step 5 — Configure Rated Load
Set the required rated current and select the resistive-load mode. Activate the rated-load section and verify that the output current reaches the target value.
Step 6 — Set Energization Times
Configure the energization duration for both the motor surge load and rated load. The typical surge-load energization setting is 60 ms, while the rated-load duration can be configured according to the applicable test requirement.
Step 7 — Enable Protection
Activate the continuous-energization protection function to prevent abnormal long-duration load connection.
Step 8 — Set Test Cycles
Enter the desired number of switching cycles through the HMI.
Step 9 — Start Testing
Press the start button to initiate the programmed test sequence.
Step 10 — Perform Switching Endurance Test
The external test fixture operates the switch under test through repeated opening and closing cycles while the SN2117M supplies the programmed motor surge and rated-load conditions.
Safety Protection
The SN2117M incorporates multiple protection functions, including:
Over-current protection
Over-voltage protection
Short-circuit protection
Earth-leakage protection
Continuous-load protection
These functions help reduce the risk of equipment damage during abnormal operating conditions and prolonged electrical testing.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer
Total Annual:
2000000 USD-3000000
Employee Number:
30~50
Ecer Certification:
Verified Supplier
We Turn Testing Standards into Working Test Systems
Sinuo designs and manufactures testing equipment and integrated laboratory systems for manufacturers, quality inspection institutes, independent laboratories, research organizations and universities.
With more than 15 years of testing-equipment ...
We Turn Testing Standards into Working Test Systems
Sinuo designs and manufactures testing equipment and integrated laboratory systems for manufacturers, quality inspection institutes, independent laboratories, research organizations and universities.
With more than 15 years of testing-equipment ...