Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 5 sets per month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood Case |
| Rain area | 1000mm×1000mm |
| Dripping aperture | φ0.4mm |
| Rainfall flow | 1mm/min, 3mm/min |
| Dripping height | 200mm (auto control) |
| Test time | 10min (adjustable) |
| Material | Aluminum alloy |
| Swing angle | Max ±175° |
| Water flow | >10L/min±5% |
| Brand Name | Sinuo |
| Model Number | SN4418 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Hand - Held Protection Against Water Jets IPX5 IPX6 6.3 Mm Or 12.5 Mm
IEC 60529 Wall Mounted IPX1 And IPX2 Vertical Drip Box Testing Equipment
IEC 60529 IPX8 Water Ingress Testing Equipment Continuous Immersion Stainless
IEC 60529 Hand Held IPX3 And IPX4 Spray Nozzle With Digital Flowmeter
Product Specification
| Payment Terms | T/T | Supply Ability | 5 sets per month |
| Delivery Time | 30 Days | Packaging Details | Plywood Case |
| Rain area | 1000mm×1000mm | Dripping aperture | φ0.4mm |
| Rainfall flow | 1mm/min, 3mm/min | Dripping height | 200mm (auto control) |
| Test time | 10min (adjustable) | Material | Aluminum alloy |
| Swing angle | Max ±175° | Water flow | >10L/min±5% |
| Brand Name | Sinuo | Model Number | SN4418 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | IPX8 waterproof testing system ，IEC 60529 waterproof test equipment ，IPX1-IPX8 water ingress tester | ||
The SN4418 Integrated IPX1~8 Waterproof Degree Test System fully complies with IEC 60529:2013 and IEC60335-1 Clause 15 international standards. It integrates vertical drip, oscillating tube, spray nozzle, hose spray, immersion and deep immersion functions to perform complete IPX1/2/3/4/5/6/7/8 waterproof performance tests in one machine. It is widely used for waterproof testing, waterproof grade certification, reliability verification of electronics, lamps, outdoor devices, automotive parts, security equipment and more.
| No. | Name | IP Code | Remark |
|---|---|---|---|
| 1 | Vertical Rain Drip Test Apparatus | IPX1~2 | Drip area: 1000mm×1000mm |
| 2 | Oscillating Tubes Test Apparatus | IPX3~4 | R200~R1600mm stainless steel tubes |
| 3 | Spray Nozzle | IPX3~4 | Handheld auxiliary spray |
| 4 | Hose Nozzle | IPX5~6 | High-pressure water spray test |
| 5 | Integrated Immersion Chamber & Water Tank & Control Cabinet | IPX7 | Inner size: 650×600×1500mm |
| 6 | Deep Immersion Tank | IPX8 | φ600×1000mm pressure vessel |
| 7 | Turntable | IPX1~6 Accessory | φ600mm, tiltable 0°/15° |
| Application | Applies to conduct IPX1, IPX2 testing. |
| Rain area | 1000mmX1000mm |
| Tank material | Stainless steel |
| Dripping aperture | ￠0.4mm |
| Hole distance | 20mm |
| Rainfall Flow | 1mm/Min, 3mm/Min, user-set parameters (error: + 0.5mm / min). |
| Water dripping height | 200mm (automatically control by the test equipment) |
| Test time | 10Min, can be set according to the need |
| Draining | Automatically emptying the tank water after the test is completed |
| Body material | Industrial aluminum alloy |
| Dimensions (LxDxH) | 1100X1200X2800mm |
| Machine structure | Wall Mount |
| Air compressor | Silent air compressor |
| No. | Item | Parameters |
|---|---|---|
| 1 | Water supply | Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| 2 | The size of the oscillating tube | Standard coming with R200mm, R400mm, R600mm, R800mm, R1000mm R1200mm, R1400mm, R1600mm oscillating tubes, made of stainless steel |
| 3 | Needle hole | Φ0.4mm |
| 4 | Included angle of two holes | IPX3:120°; IPX4:180° |
| 5 | Oscillating tube swing angle | Max. ±175° can be preset (Note: standard requires IPX3:120°; IPX4:360°, but due to there is turntable under oscillating tube during test, so 360° cannot achieved during actual testing, if without turntable, then 360° can be achieved) |
| 6 | Swing speed | IPX3: 4s/time (2×120°); IPX4: 12s/time (2×360°); |
| 7 | Water flow | Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/min per hole) |
| 8 | Testing time | 0.01S～99 hours 59mins,can be preset |
| 9 | Pressure gauge | 0~0.25MPa |
| 10 | Site requirements | Dedicated IP waterproof test room, the ground should be flat with illumination 10A waterproof leakage switch (or socket) used for equipment. With good function of inflow and drainage. Ground installation |
| 11 | The area | According to the oscillating tube chose |
| No. | Item | Parameter |
|---|---|---|
| 1 | Water supply | Water flow rate is 50～150kpa clean water without inclusion. |
| 2 | Spray nozzle parameters | external diameter: Ф102mm spherical diameter: SФ75.5mm There is a middle hole and There are 24 holes in the internal circle of holes of which the included angle is 30°. There are 96 holes in the external circle of holes of which the included angle is 15°. 121 holes in total. The hole diameter: Ф0.5mm It is made of brass. |
| 3 | Water flow | 10L/min±5%, adjustable by flow meter (flow meter is not included in this item, optional) |
| 4 | Range of pressure gauge | 0～0.4Mpa |
| 5 | Baffle | Removable |
| 6 | Pressure gauge | 0~0.25MPa |
| 7 | Site requirements | Dedicated IP waterproof test room, the ground should be flat with illumination With good function of inflow and drainage. |
| No. | Item | IPX5 | IPX6 |
|---|---|---|---|
| 1 | Water supply | Water flow rate ＞ 12.5L/min±5% clean water without inclusion. It can be achieved by the stainless-steel water tank and pressurized equipment | Water flow rate ＞100L/min±5% clean water without inclusion. It can be achieved by the stainless-steel water tank and pressurized equipment |
| 2 | The nozzle diameter | Ф6.3mm | Ф12.5mm |
| 3 | Water flow | 12.5±0.625L/min,Flow meter is adjustable | 100±5 L/min,Flow meter is adjustable |
| 4 | The distance from jet nozzle to enclosure | 2.5~3m | 2.5~3m |
| 5 | Testing time | Not less than 1min/m²(not less than 3 mins) | Not less than 1min/m²(not less than 3mins) |
| 6 | Pressure gauge | 0~0.25MPa | 0~0.25MPa |
| 7 | Site requirements | Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. | Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. |
| Item | Parameter |
| Inner chamber size | 650mm×600mm×1500mm |
| Water tank volume | Approx. 500L |
| Temperature control | Room temp ~ 65℃ (±3℃, PID) |
| Lifting distance | 0~1200mm |
| Load capacity | 100kg |
| Controller | Mitsubishi PLC + 7-inch touch screen |
| Power | Three-phase AC 380V, 50Hz |
| Dimensions | 1400×750×1600mm |
| Item | Parameter |
| Tank size | φ600mm×1000mm |
| Pressure range | 0~5bar (customizable) |
| Pressure gauge | 0~6bar, 0.25 class |
| Test time | 0~99min |
| Max pressure | 5bar |
| Connection | 3/4 high-pressure steel hose |
| Item | Parameter |
| Diameter | φ600mm |
| Speed | 1rpm |
| Tilt angle | 0°, 15° |
| Rotation | 90° / continuous |
| Material | Industrial aluminum alloy |
| Dimensions | 800×800×250mm |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!