Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 Sets / Month |
| Delivery Time | 25 days |
| Packaging Details | Plywood Case |
| Test station | One station |
| Steel ball | SФ50+0.05 mm |
| Test contents | Condutor connection pull test |
| Test items | Wire connection tension |
| Clamping method | Open flat pliers |
| Tension exert time | 0-9999S |
| Pull force sensor | 0-500N |
| Pull force weight | 30N |
| Brand Name | Sinuo |
| Model Number | SN2142 |
| Certification | Calibration Certificate(cost additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
100mm Drop Tester EN 71-1 Toys 1KG Impact Strength Test Apparatus
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets / Month |
| Delivery Time | 25 days | Packaging Details | Plywood Case |
| Test station | One station | Steel ball | SФ50+0.05 mm |
| Test contents | Condutor connection pull test | Test items | Wire connection tension |
| Clamping method | Open flat pliers | Tension exert time | 0-9999S |
| Pull force sensor | 0-500N | Pull force weight | 30N |
| Brand Name | Sinuo | Model Number | SN2142 |
| Certification | Calibration Certificate(cost additional ) | Place of Origin | China |
| High Light | Socket Pull Force Test Apparatus ，Socket 30N Pull Force Test Apparatus | ||
IEC 60884-1 Figure 15 Connections Of Conductors Pull Force Test Apparatus For Socket Test
Product Information:
This test apparatus conforms to IEC 60884-1:2022 clause 13.4 figure 15. It is used to detect the socket structure of the screwless terminal during or after the socket is installed on the installation box or wall, the connection and/or disconnection device of the screwless terminal cannot be triggered by the conductor, and the safety performance of its structure is verified.
Test principle: Use the push rod connection test tool 1 (Ф50 steel ball) to apply a 120N push force to the connection and/or disconnection device. After the force value is reached, set a release weight to apply a 30N pull force to the conductor, and take it off after 1 minute of the test time.
Technical Parameters:
| Test station | One station |
| Electrical control method | Intelligent integrated control of electrical appliances, digital display chronograph, digital display force value meter view |
| Drive mode | Motor drive + hand sliding table |
| Test items | Wire connection tension test (including 120N push force and 30N pull force) |
| Test process | Drive the force-applying steel ball along the sliding table to apply thrust to the sample by shaking the hand wheel. When the digital display shows that the force value reaches 120N, the equipment automatically drives the motor and the cam structure to separate the weight tray from the 30N tension weight. Gently apply tension to the wire, and the weight tray will automatically reset after 1 minute, stop applying tension, and manually shake the handwheel in the opposite direction, the steel ball will be separated from the sample, and the test is over |
| Sample clamping method | Multifunctional open flat pliers, adjustable up and down, left and right
|
| Force steel ball | SФ50+0.05 mm |
| Thrust exert method | Manually, drive the force-applying steel ball along the slide table to apply thrust to the sample by shaking the hand wheel, the digital display will display the force value, and automatically apply the pulling force when the force value is reached |
| Thrust sensor | 0-200N, resolution 0.1N |
| Pull weight | 30N |
| Tension exert method | Motor-driven cam releases weight tray from tension weights |
| Tension exert time | 0-9999S, set the digital display chronograph, the device will automatically start timing and reset |
| Arrangement of force exert | The structure of double sliding table ensures that the test sample 1 does not touch the wire when the force is applied |
| Result judgment | Whether the wire comes out of the screwless terminal when the pulling force is applied, if it comes out, it is unqualified |
| Equipment size and weight | About: 800×800×1100 (mm) W×D×H, equipment weight about: 100kg |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!