Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 10 sets per month |
| Delivery Time | 30 Days |
| Packaging Details | Plywood Case |
| Shock Waveform | Half Sine |
| Lifting Method | Hydraulic lift |
| Peak Acceleration | 15—300 G |
| Pulse Duration | 3.5—30ms |
| Sampling Frequency | 192KHz |
| Work Platform | 1000 × 1000 mm |
| Brand Name | Sinuo |
| Model Number | SN558-HSKT200 |
| Certification | Calibration Certificate(Cost Additional ) |
| Place of Origin | China |
View Detail Information
Explore similar products
High Voltage High Current EV Power Battery Detection System for Automotive Large
15V/10A 30V/10A Primary Dry Batteries Capacity Test Equipment Charge Discharge
Charge Discharge Battery Testing Equipment Explosion Proof Safety Stainless
IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting
Product Specification
| Payment Terms | T/T | Supply Ability | 10 sets per month |
| Delivery Time | 30 Days | Packaging Details | Plywood Case |
| Shock Waveform | Half Sine | Lifting Method | Hydraulic lift |
| Peak Acceleration | 15—300 G | Pulse Duration | 3.5—30ms |
| Sampling Frequency | 192KHz | Work Platform | 1000 × 1000 mm |
| Brand Name | Sinuo | Model Number | SN558-HSKT200 |
| Certification | Calibration Certificate(Cost Additional ) | Place of Origin | China |
| High Light | Waveform Generator Hydraulic Shock Test System ，Half-Sine Waveform Hydraulic Shock Test ，Vertical Hydraulic Shock Test System | ||
Hydraulic Vertical Shock Test System with Half-Sine Waveform Generator
Product Information:
This machine is mainly suitable for shock tests in the fields of electronic products, aerospace, ships, military industry, automotive parts, transportation, etc. By selecting different waveform generators, shock tests such as half-sine wave, post-peak sawtooth wave or square wave can be performed.
The equipment meets the test specifications of MIL-STD-202F, IEC-68-2-27, MIL-STD-810F, MIL-STD-883E, etc.
Environmental requirements:
1. On-site temperature: 5℃~+28℃ (average temperature within 24 hours ≤28℃);
2. Relative humidity: ≤85%RH;
3. Air source: 0.5--0.8MPa
4. Power supply conditions: three-phase five-wire;
5. Voltage range: AC380V;
6. Allowable frequency fluctuation range: (50±0.5)Hz;
7. The grounding resistance of the protective ground wire is less than 4Ω;
8. The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site, and this switch must be used independently for this equipment.
Technical Parameter:
| Work Platform | 1000 × 1000 mm |
| Work surface material | High-strength imported high-quality aluminum alloy |
| Maximum load | 200kg |
| Half-sine peak acceleration | 15—300 G |
| Half-sine pulse duration | 3.5—30ms |
| Lifting method | Hydraulic lift |
| Device size | Approx. 2150 × 1450 × 2250mm |
| Total equipment | About 3000 kg |
| Measurement system | |
| Input Channels | 2 channels |
| Sampling frequency | 192KHz |
| Input form | Voltage, charge |
| Voltage range | -10V--+10V |
| Coupling method | AC,DC,ICP |
| Shock Waveform | Half Sine |
| Communication interface | USB2.0 |
| Supported standards | National standard, national military standard, US military standard, user-defined standard |
| Operating system | Microsoft Windows7/10 |
| System Accelerometer | |
| Brand | YMC |
| Output method | Charge Type |
| Sensitivity | 3.93pC/g |
| Frequency range | 0.5—12KHz |
| Acceleration range | ±2500G |
| Work Environment | -40~+160℃ |
| Other | |
| Power supply | Single phase 380V±10% |
| Compressed air | 0.5—0.8Mpa |
| Temperature | RT～40℃ |
| Humidity | 25℃＜85RH％ |
Shock machine main introduction:
1. Working platform: high-strength imported aluminum alloy working platform is adopted.
2. Lifting mechanism: hydraulic cylinder lifting and lowering.
3. Lifting height control: the lifting height is measured by the photoelectric encoder assembly installed on the base. The photoelectric encoder measurement has high precision, strong anti-interference ability, high reliability, and ensures the repeatability of the shock.
4. Braking system: pneumatic braking strong friction brake anti-secondary shock braking function is adopted to prevent secondary rebound
5. Buffer system: effectively reduce the shock force of the shock test on the ground, and a self-buffering system is designed, which consists of a base, a damper, and an airbag.
Main configuration list:
| No | Name | QTY |
| 1 | Shock table body | 1SET |
| 2 | Half-sine wave generator (felt) | 1SET |
| 3 | Hydraulic source system | 1SET |
| 4 | Sensor | 1SET |
| 5 | Charge Amplifier | 1SET |
| 6 | Controller | 1SET |
| 7 | Measurement and control software | 1SET |
| 8 | Professional industrial computer | 1SET |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!