Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 5 Sets Per Month |
| Delivery Time | 30 days |
| Packaging Details | Plywood Case |
| Max. load current | 1000A |
| DC response time | ≤5μs |
| Built-in resistor | 10±0.2mΩ |
| Control method | PLC control |
| Normal temperature | RT+10℃~100℃ |
| Temperature rise rate | 3±1℃/min |
| Acquisition channel | 1 channel |
| Collection range | 0-1000A DC |
| Brand Name | Sinuo |
| Model Number | SN551-408L1000A |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
High Voltage High Current EV Power Battery Detection System for Automotive Large
15V/10A 30V/10A Primary Dry Batteries Capacity Test Equipment Charge Discharge
Charge Discharge Battery Testing Equipment Explosion Proof Safety Stainless
IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting
Product Specification
| Payment Terms | T/T | Supply Ability | 5 Sets Per Month |
| Delivery Time | 30 days | Packaging Details | Plywood Case |
| Max. load current | 1000A | DC response time | ≤5μs |
| Built-in resistor | 10±0.2mΩ | Control method | PLC control |
| Normal temperature | RT+10℃~100℃ | Temperature rise rate | 3±1℃/min |
| Acquisition channel | 1 channel | Collection range | 0-1000A DC |
| Brand Name | Sinuo | Model Number | SN551-408L1000A |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
IEC 62133-2 Temperature Controlled Type External Short Circuit Tester 408L Current 1000A
Product information:
It is conforms to the standard of IEC 60335-1:2021 Annex B, UN38.3 clause 4.5 Test T.5, UL 1642, IEC 62619:2017 clause 7.2.1, IEC62133-1:2017 clause 7.3.2 , IEC62133-2:2017 clause 7.3.1 and 7.3.2 , IEC62133:2014 clause 7.3.2,8.3.1, 8.3.2, IEC60086-4 clause 6.5.1, IEC60086-4 clause 6.5.8 6.5.9 , and so on.
Technical Parameters:
| Name | Parameters |
| Model | SN551-408L1000A |
| Max. load current | 1000A |
| DC response time | ≤5μs |
| Built-in resistor | 10±0.2mΩ |
| Inner chamber size | W700*700H*D600mm |
| Control method | PLC and Touch screen |
| Inner box material | Stainless steel |
| Sealing strip | Corrosion-resistant silicone. |
| Temperature control | Normal temperature RT+10℃~100℃ (can be preset) Temperature rise rate 3±1℃/min Temperature dial 0.5℃ Temperature uniformity: ±2℃ |
| Test stop condition | 1) The battery temperature drops to 20% lower than the peak; 2) Short circuit time |
| Battery surface temperature | Can monitor temperature changes during battery surface testing |
| Sample rack | Stainless steel SUS #201 perforated steel plate storage rack, with a maximum load-bearing capacity of 30KG on a single layer. The height is adjustable at the same time. |
| Hall element collects current signal | Hall elements are used to collect the current generated when the short-circuit system is short-circuited, avoiding the generation of contact resistance, and the data transmission is stable and accurate;
|
| Lead hole | There is a lead hole with a diameter of 50mm on the left side of the box for test wires to pass through. |
| Chamber door | High-strength hinges are used to fix the door, and at least 2 sets of explosion-proof locks can be installed on the door to fix it.
|
| Explosion-proof pressure relief device | It has the function of exhaust, explosion-proof and pressure relief. The rear of the protective box has a magnet-adsorbed pressure relief door (200*200mm). When strong airflow impacts, the pressure relief door automatically opens and closes to reduce the impact of the explosion. |
| Lighting | The test chamber door is designed with high-brightness LED lighting to make it easy to see the test conditions in the test chamber. |
| Smoke exhaust | Powerful smoke exhaust and air induction centrifuge: high temperature resistant, back smoke exhaust port diameter 60mm |
| High temperature motor | High-temperature-resistant long-axis motor/370W made in Taiwan for high-temperature boxes, multi-wing wind wheel with large air volume and low noise |
| Heater | Fin-type heat pipe nickel-chromium alloy U-shaped high-efficiency heater automatically calculates high-precision PID+SSR control (calculation cycle: 1~4S can be set), so that its heat loss is equivalent to the heating amount, so it is better than traditional ON/OFF Control saves about 10% power |
| Thermometer | Made in Taiwan, high precision, DIN specification grade A, ψ4.8mm, SUS #304 stainless steel, PT 100Ω |
| Explosion proof chain | The door is equipped with 3 explosion-proof chains to prevent the door from being blown out and injuring people. |
| Control panel security design | The control panel is built-in, and the touch screen and buttons will not be mistakenly pressed or collided by external objects or the body. It is safer. |
| Tempered glass window | The test chamber door is equipped with a 300*300mm double-layer tempered glass window, which can clearly observe the test conditions in the test chamber. |
| Bottom design | There are 4 universal casters for easy movement and transportation. It is also equipped with 4 foot cups for convenient positioning and fixing equipment. |
| Explosion-proof lighting design | The door is designed with high-brightness explosion-proof LED lights to illuminate the entire testing space. |
| Current acquisition channel | 1 channel |
| Current collection range | 0-1000A DC |
| Current acquisition accuracy | ±0.5%F.S |
| Current acquisition rate | 1 time/S |
| Voltage acquisition channel | 1 channel |
| Voltage collection range | 0～100V |
| Voltage acquisition accuracy | ±0.2%FS |
| Voltage acquisition rate | 1 time/S |
| Temperature acquisition channel | 1 channel |
| Temperature collection range | RT～100℃ |
| Temperature collection accuracy | ±2℃ |
| Temperature acquisition rate | 1time/S |
| Battery surface temperature collection channel | 2 channels -20-800℃ |
| Remote control short circuit | Remote control of short circuit test can be achieved |
| Chamber external dimensions | Approx. W950 X D950 X H1700mm (Subject to design) |
| Chamber weight | Approx.300kg |
| Voltage and frequency | AC 220V, 50HZ |
| Total power | 3 KW |
Company Details
Business Type:
Manufacturer
Total Annual:
800000-1500000
Employee Number:
30~50
Ecer Certification：
Verified Supplier
Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la... Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing la...
Get in touch with us
Leave a Message, we will call you back quickly!