Skymen Technology Corporation Limited
| Payment Terms | T/T |
| Supply Ability | 6000 set per month |
| Delivery Time | In Stock |
| Packaging Details | wooden box |
| Product | 4 stage ultrasonic cleaner |
| Material | Stainless steel |
| Washing step | pre-cleaning and rinsing， drying |
| Ultrawave | 40khz, (Or 80khz, 28khz,132khz, 68khz optional） |
| Oil separator | With/ without |
| Lid | hingled lid with rubber seal |
| Tank size | custom made inter size available |
| Brand Name | Skymen |
| Model Number | JP-4024GH |
| Certification | CE, ROHS, FCC |
| Place of Origin | China, Guangdong Shenzhen |
View Detail Information
Explore similar products
Twin tank 28khz ultrasonic cleaner for aircrafts parts marine engine fuel
28KHz / 40KHz Industrial Ultrasonic Cleaner 99liter 1500watts for Auto Parts
Industrial ultrasonic cleaner with digital heating and timer ultrasonic power
28/40Khz Ultrasonic Glass Cleaner 77l Each Tank Cleaning Tank And Drying Tank
Product Specification
| Payment Terms | T/T | Supply Ability | 6000 set per month |
| Delivery Time | In Stock | Packaging Details | wooden box |
| Product | 4 stage ultrasonic cleaner | Material | Stainless steel |
| Washing step | pre-cleaning and rinsing， drying | Ultrawave | 40khz, (Or 80khz, 28khz,132khz, 68khz optional） |
| Oil separator | With/ without | Lid | hingled lid with rubber seal |
| Tank size | custom made inter size available | Brand Name | Skymen |
| Model Number | JP-4024GH | Certification | CE, ROHS, FCC |
| Place of Origin | China, Guangdong Shenzhen | ||
| High Light | 40khz Four Stages Ultrasonic Cleaner ，38L Four Stages Ultrasonic Cleaner ，FCC Semiconductor Ultrasonic Cleaner | ||
Most advanced AISI304/ AISI316 stainless steel four stage industrial ultrasonic cleaning equipment
Model: JP-4024GH
| Specifications | |
| 1st Cleaning tank | 1st Tank size:500L*300W*250Deep mm |
| Basket size :450L*250W*200H mm | |
| Capacity: 38 liters | |
| Tank Material: 304 Stainless steel | |
| Ultrasonic frequency: 40 khz | |
| Transducer: 12 pieces | |
| Timer: 1-99 hours | |
| Heater: normal-95 °C | |
| Ultrasonic power: 600W | |
| Heating power: 1500W | |
| With Oil skim system | |
| 2nd precision cleaning tank | 2nd tank size: 500L*300W*250Deep mm |
| Basket size :450L*250W*200mm | |
| Tank Material: 304 Stainless steel | |
| Ultrasonic frequency: 40 khz | |
| Transducer: 12 pieces | |
| Timer: 1-99 hours | |
| Heater: normal-95 °C | |
| Ultrasonic power: 600w | |
| Heating power :1500W | |
| With Oil skim system | |
| Capacity: 38 liters | |
| Ultrasonic power:1.2 kw | |
| Heating power :1.5KW | |
| 3rd air bubble rinsing Tank | 3rd tank size: 500L*300W*250Deep mm |
| Basket size :450L*250W*200H mm | |
| Air bubble rinsinng | |
| Heating power :1500W | |
| Temperature setting: normal-95 °C | |
| 4th hot air drying | 4th tank size: 500L*300W*250H |
| Basket size :450L*250W*200H mm | |
| Capacity: 38 liters | |
| Dry temperature : to 150 °C | |
| Drying power 3KW | |
| Packged with plywooden case | |
| Overall Dimension: 268*95*85cm (L*W*H) | |
| Power supply: 380V/50Hz. 3 phase |
The process of cleaning your parts is actually very simple once you have everything you need:
1.) Get Your Sonic Cleaner Ready – Fill your ultrasonic unit to the “fill line” with hot, clean water. Next, add your cleaning concentrate to around 10% concentration. This can be adjusted up or down depending on how dirty your parts are. Insert your cleaning basket, and let the unit run empty for a cycle or two. This will allow the tank to come to temperature, as well as “de-gas” the cleaning solution.
2.) Clean Your industrial Metal Parts – First, place your metal parts into the cleaning basket. Make sure your parts are arranged in such a way that they are completely submerged when lowered into the cleaning tank. Once the basket and parts are in the tank, choose your cycle time (if applicable) and hit go! In general, it shouldn’t take more than 5 to 10 minutes to fully clean your parts. Once the cycle is completed, remove your parts from the basket, and allow to air dry, or if available, blow dry.
TIP: Your tank of ultrasonic cleaning solution can be used more than once! A good indication of when you need to replace your solution with a new batch is when cleaning time begins to increase to acheieve the same result.
3.) Ultrasonic Relubrication – Using an ultrasonic parts washer to re-lubricate your bike parts may sound far fetched, but the process is quite simple. First, have your ultrasonic cleaner ready with a tank of clean, hot water, filled to JUST UNDER the fill line. Next, place around 2 to 3 inches of lubricant in your lube pan, then place the lube pan in such a way that the bottom inch of the lube pan is submerged around an inch or so in the tank water. Many “solid trays” have flanges on the side to facilitate this purpose. Finally, run your ultrasonic unit as normal, as if you were cleaning parts.
The way this works is that ultrasonic energy will actually pass through the tank of water, pass through the bottom of the lube pan, and into the lubricant within, thus sonifying it. The same process that cleans even microscopic nooks and cranies will now shove lubricant into those same areas!
After a full cycle, remove your parts from the lube pan, and allow them to drip access lubricant back into the pan. Finally, wipe any remaining lubricant from your parts, as over lubrication can attract abrasive soils over time.
Whatever cleaning schedule you set up, you’ll find that the life of your bike is extended, and you’ll get more hours of trouble-free riding by ke
High efficiency amazing result
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2007
Total Annual:
7,000,000-10,000,000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ... Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China. ...
Get in touch with us
Leave a Message, we will call you back quickly!