Ultrasonic Cleaning Machine, Ultrasound Cleaning Equipment with Generator

Ultrasonic cleaning machine, ultrasound cleaning equipment with generator control for rust engine



What are the advantages of ultrasound over traditional cleaning methods?
Compared with traditional methods of ultrasonic cleaning allows you to:
· Minimize the use of manual labor
· Make cleaning and degreasing without the use of organic solvents
· Clean hard to reach areas of products and remove all types of dirt
· Shorten the processes such as extraction, dispersion, purification, chemical reactions
· Eliminates costly mechanical and chemical cleaning of heat exchangers

Advantages of the ultrasonic cleaning machine:
1 tank size can be customized
2 ultrasonic power can be customized
3 the cleaner is equipped with wheel-to remove easily
4 with drainage
5 with lid to reduce noise
6 1 year after-service
7 filtration system is available

JTS-1072
Specification details:
Tank's total capacity: 360L
Tank's material: SUS304 / SUS316L
In-tank surface finishing: Hard-Cr Plating Treatment ( 20+ microns )
Housing's material: Stainless steel
Ultrasonic frequency: 28kHz / 40kHz
Ultrasonic transducer: 72
Ultrasonic output power (MAX. ): 3600W
Electronic generator: KG1800
Heater's (hot plate) power: 9kW
With lift to make goods up and down.
Generator's power requirement: AC 220V / 240V, 1, 13AMP


Features:
Adjustable ultrasonic power
Original BLT type transducer
SUS 304/316L stainless steel tank
Adaptable for continuous operation
Adjustable thermo controller
Adjustable ultrasonic power
With separate control ultrasonic electronic generator
Sweep mode control available
Digital timer & heating control
Boost mode& oil skimmer upon clients requirement
Pressure pump and filter system are available

Functions:
JTS series single tank ultrasonic cleaner equipment system includes replaceable transducer box and generator. The transducer box and generator can be both build-in or separate but work together to operate ultrasonic cleaning process with transducer box immersible mounted in fluid tank, one side or both side or bottom mounted inside the tank. The number and placement of transducers is selected to give maximum results in any parts cleaning tank with any cleaning load. Specification of tank dimension and transducer boxes are custom made available. Either for mould of parts cleaning can receive perfect cleaning efficiency. Stainless steel basket is optional.