500W PCB Dust Cleaner Machine With SMT Pick And Place Mounter SPI AOI Machine

PCB460 high-end SMT PCB dust cleaning machine is professional pre-print PCBA cleaning equipment specially developed for large-size PCB up to 460*460mm, widely installed before solder paste printer to remove micro dust, metal scraps, fiber debris and static charge on circuit board surface. The machine adopts single-track automatic width adjustment design, 3mm anti-static flat belt transports PCB stably with standard 910±20mm industry transfer height, fixed left-to-right conveying direction. It supports PCB thickness from 0.4mm to 5mm: 0.4–2mm boards work without roller height adjustment, while 2–5mm thick PCBs only need simple roller height fine-tuning. The machine requires at least 3mm edge space of PCB and achieves stable cleaning cycle ≥10 seconds per piece. Equipped with full multi-stage integrated cleaning system: upper & lower ESD brush sweeping, high-power vacuum dust collection, double imported ESD silicone sticky roller adhesion, and static neutralization function. The sticky paper uses drawer-type pull-out design, greatly simplifying paper replacement without dismounting the whole machine. Standard configuration includes 2 imported ESD sticky rollers, 1 ESD sticky paper roll, 1 anti-static brush, 250W independent dust collector, static eliminator and real-time static detection sensor. Controlled by HMI touch screen + PLC, reserved SMEMA communication port to realize signal interconnection with upstream and downstream SMT machines. Working condition supports AC220V power supply, total power 500W, matched air source 0.6MPa with 60L/min air consumption, whole machine net weight 160KG, compact body occupies less workshop space. It realizes one-side cleaning & straight through conveying, continuous high-efficiency cleaning for mass SMT production.

1. Supports Large 460*460mm Wide PCB, Wider Compatibility Than Small Standard Cleaners Most common PCB dust cleaners only support max 350mm width boards; PCB460 adapts 460mm large-size industrial, automotive and server PCBs, meeting wide-format circuit board production demands. It covers thin 0.4mm flexible PCB to 5mm thick heavy copper board with flexible roller height adjustment.
2. Full 4-in-1 Multi-Stage Cleaning System, Thorough Dust & Static Removal Competitors only equip single sticky roller or simple brush without independent dust suction and static monitoring. Our machine combines ESD brush sweeping, vacuum dust collection, double silicone sticky roller adhesion and static elimination, completely removing invisible micro-particles that cause printing open/short defects. Built-in static sensor real-time monitors electrostatic value to avoid component breakdown.
3. Drawer-Type Sticky Paper Design, Greatly Save Maintenance Time Ordinary cleaners need to disassemble side covers to replace sticky paper, wasting production downtime. Drawer pull-out structure allows quick paper replacement within 1 minute, no extra tools required, effectively improving line OEE.
4. Automatic Single Track Width Adjustment, No Manual Screw Tuning Low-cost cleaners rely on manual handwheel width adjustment with low precision; automatic motor-driven track adjustment realizes one-key size switching when producing mixed-size PCBs, reducing human operation errors and board scratch risk.
5. Complete ESD Anti-Static Configuration, Full Anti-Static Protection All core contact consumables (brush, sticky roller, sticky paper) adopt imported ESD materials, plus independent static eliminator, which continuously neutralizes static charge on PCB surface, suitable for high-sensitivity chip PCBA production.
6. Reserved SMEMA Communication Port, Realize Full Automatic Line Interconnection Most entry-level PCB cleaners have no SMEMA interface and cannot link with printers, mounters or AOI. Standard SMEMA port realizes automatic signal docking with whole SMT line, unmanned intelligent production matching smart factory requirements.
7. Independent 250W Dust Collector, No Secondary Dust Pollution Integrated high-power vacuum dust collector absorbs swept debris immediately, preventing secondary dust falling back on PCB surface, far better than models without independent dust suction function on the market.
8. Standard HMI+PLC Intelligent Control, Visual Parameter Setting Simple relay-controlled cheap cleaners have no touch screen; HMI touch panel displays cycle time, static value, equipment fault alarm clearly, all cleaning parameters adjustable visually, easy for new operators to learn and operate.

1. Pre-solder paste printing cleaning station of medium & large SMT automatic production lines;
2. Production of large-size PCBs: automotive electronics, industrial control mainboards, server boards, large LED panel substrates;
3. Flexible PCB, heavy copper thick PCB, multi-layer circuit board manufacturing workshops;
4. High-precision electronic assembly requiring zero printing defects: medical electronics, communication circuit boards, new energy power PCBs;
5. Smart SMT factories needing SMEMA full-line signal interconnection automatic equipment;
6. PCBA visual inspection pre-cleaning workstation, removing dust to avoid false detection of AOI machines;
7. Electronic prototype labs and small-batch mixed PCB size flexible production lines.