Shenzhen Hongxinteng Technology Co., Ltd.
| Weight | 1850kg |
| PCB size | 350mm |
| Power supply | 3-phase 5-wire 380V50HZ |
| Dimensions | 5050mm x 1420mm x 1750mm |
| Startup power | 33KW |
| Operation power | 8KW |
| Spray pressure | 0.2Mpa-0.4Mpa |
| Preheating length | 1800mm |
| Preheating temperature | Room temperature~200℃ |
| Conveyor speed | 500-1800mm/min |
| Conveyor height | 750±20mm |
| Component height | Top120mm, Bottom15mm |
| Solder pot temperature | 300℃ |
| Solder pot capacity | 480kg |
| Cooling rate | 4-6℃/s |
| Model Number | E-FLOW-Z |
View Detail Information
Explore similar products
Semi automatic PCB Lifting Wave Soldering Machine HXT-ZD4530DPF PCB Production
DIP Soldering Machine HXT-ZD4530 PCBA Components Soldering Production and
Mini Desktop Wave Soldering Equipment HXT-ZD4530T DIP Production Line Equipment
Selective Soldering Machine ZD4530DPF Tin Wave Soldering DIP Solder Equipment
Product Specification
| Weight | 1850kg | PCB size | 350mm |
| Power supply | 3-phase 5-wire 380V50HZ | Dimensions | 5050mm x 1420mm x 1750mm |
| Startup power | 33KW | Operation power | 8KW |
| Spray pressure | 0.2Mpa-0.4Mpa | Preheating length | 1800mm |
| Preheating temperature | Room temperature~200℃ | Conveyor speed | 500-1800mm/min |
| Conveyor height | 750±20mm | Component height | Top120mm, Bottom15mm |
| Solder pot temperature | 300℃ | Solder pot capacity | 480kg |
| Cooling rate | 4-6℃/s | Model Number | E-FLOW-Z |
| High Light | 3-phase 5-wire system Wave Soldering Machine ，E-FLOW-Z Series Wave Soldering Machine ，PCB size 350mm Wave Soldering Machine | ||
Main features: E-flow (left to right)3 hot air; heavy-duty double hook-and-claw transmission; tin stove exhaust hood; width of across plate: 50mm-350mm
1. Connection: Linkage type into the plate connection way, aluminum guide, stainless steel chain drive.
2.Transmission system: Equipped with heavy-duty double hook claw, aluminum alloy guide rail anti-deformation structure design; manual adjustment substrate width; transmission angle can be adjusted, configuration, digital angle display; transport speed is controlled by frequency converter, stepless speed.
3.Tin oven system: The tank is made of special cast iron with anti-corrosion treatment, wave crest driven by direct-connected motor, variable frequency speed regulation, tin slag diversion, and oxide reduction device, and manual control of the movement of tin furnace in and out and up and down; External heating device, PID temperature control mode and low level, bit alarm.
4.Spray systems: The spray length can be adjusted automatically, the spray width and speed can be set digitally, and the spray flow rate and the spray particle size can be adjusted by a pressure meter trimmer Constant pressure device supply flux, flux liquid, position alarm and flux auto-add; strong ventilation, filtration system.
5. Preheating system: New Drawer Modular and energy-saving design, three-stage micro-hot air cycle heating, higher thermal efficiency, temperature more uniform. Three section temperature zone, preheating zone length of 1.8 meters, PID temperature control mode.
6. Cooling system: forced up-and-down natural wind cooling.
7. Claw washing device: special brush cleaning.
8. Control system: PC + PLC electrical control system, Chinese and English Windows Operation Interface, data storage and other functions.
| Modol NO | E-FLOW-Z350(External spraying) | E-FLOW-Z450(External spraying) | E-FLOW-Z610(External spraying) |
| Dimension:LxWxH(mm) | 5050x1420x1750 | 5050x1520x1750 | 5050x1690x1750 |
| Weigh | Approx, 1850kg | Approx.2050kg | Approx.2300kg |
| Power Supply | 3PH 380V 50HZ | 3PH 380V 50HZ | 3PH 380V 50HZ |
| Startup Power | 33KW | 33kw | 45KW |
| Operation Powr Consumption | Approx.8KW | Approx.9KW | Approx.11KW |
| Control System | PC+PLC | PC+PLC | PC+PLC |
| Spraying movement | Step motor | Step motor | Step motor |
| Spray Pressure | 0.2Mpa-0.4Mpa | 0.2Mpa-0.4Mpa | 0.2Mpa-0.4Mpa |
| Flux Flow Arrange | Option | Option | Option |
| Auto Fill Flux | Standard | Standard | Standard |
| Exhaust | Top exhaust | Top exhaust | Top exhaust |
| ExhaustDucting Diameter(mm) | Φ250 | Φ250 | Φ250 |
| Exhaust tan power | 750W | 750W | 750W |
| Preheating Mode | Convection / IR emitter | Convection / IR emitter | Convection / IR emitter |
| Control Mode | PID | PID | PID |
| Preheating Zone Number | 3 | 3 | 3 |
| Preheating Length(mm) | 1800 | 1800 | 1800 |
| Preheating Temperature | Room temperature~200℃ | Room temperature~200℃ | Room temperature~200℃ |
| Warm-upTime(min) | Approx.12min(setting:150℃) | Approx.12min(setting:150C) | Approx.12min(setting:150℃) |
| Blower Motor | 150W 3PH 220VAC | 150W 3PH 220VAC | 250W 3PH 220VAC |
| PCB Width(mm) | 50~350 | 50-450 | 50-610 |
| Convoyor Direction | L-R(Option:R→L) | L-R(Option:R-L) | L-R(Option:R-L) |
| Conveyor Speed(mm/min) | 500-1800 | 500-1800 | 500-1800 |
| Conveyor Height(mm) | 750±20 | 750+20 | 750±20 |
| Available Component Heigh (mm) | Top120,Bottom15 | Top120,Bottom15 | Top120,Bottom15 |
| Conveyor Speed Control Mode | Closed loop stepless speed regulationg Inverter | Closed loop stepless speed regulationg Inverter | Closed loop stepless speed regulationg Inverter |
| Fingers | Spring Pressing Finger/D-40Type Fingor/Double-hook Finger/Heavy type double hook f inger,Options | Heavy type double hook f inger/ | |
| Opt on:Special jig for fixture | |||
| Conveyor Angle | 4-7° | 4-7” | 4~7° |
| Type of solder Pot | Motor drive | Motor drive | Motor drive |
| Solder Pot Material | Casting Iron | Casting Iron | Casting Iron |
| Wave Height Adjustment | In verte Approx:Digital Control by PC | ||
| Cooling Method | Air Cooling Option:Water cooing | ||
| Heater Power | 13.5KW | 13.5KW | 18KW |
| Solder Pot Temperature | 300℃ | 300℃ | 300℃ |
| Solder Pot Capacity | Approx.480kg | Approx.550kg | Approx.640kg |
| Wave Drive Power | 180W*2 3PH 220VAC | 180W*2 3PH 220VAC | 180W*2 3PH 220VAC |
| Solder Pot Warm-up Time | Approx.150min(setting:250℃) | Approx 150min(setting:250℃) | Approx.150min(setting:250C) |
| Temperature Control Mode | PID | PID | PID |
| Finger Cleaning System | Brush | Brush | Brush |
| Note: 4 sections of preheating can be customized, and the length is 2.3m. | |||
Conveyor:Direct buffering input structure.Stainless steel chain conveyor, durable and special design for aluminum alloy track.Adopt segment floating structure to prevent from deformation
Pre-heatingzones:Designforenergysavingandremovablemodules(drawerdesign).Anycombinationofinfraredandhotairconvection.Use PID control to achieve±2C accuracy.The temperature variation for pre-heating zone and soldering zone is less than s 5℃
Flux spraying system:Managed by digital control.The motion of the spray nozzle is controlled by stepper motor.Flux supply is controlled automatically for optimized effect.Exhausting and filter system installed on the top
The solder pot is made by cast iron with anti-corrosion ceramic coating equipped with two low flowrate nozzles
Aircoolingsystem:coolingrate4-6C/s(adjustable)
PC+PLC control system.Windows 7 operation system with Chinese/English operation interface.Processing profile and data auto saving function.Alarm for detecting the flux and solder level
Q1. This is the first time I use this kind of machine, is it easy to operate?
A: There is an English manual and guide video that show you how to use machine. We also can provide engineers to your factory for your installation training. If you still have any question, please contact us by e-mail / Skype/ phone / trade manager online service.
Q2: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty and after-sales for life.
Q3. If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG , we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
Q4. How to proceed an order for SMT Loader machine?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the details and places deposit for formal order.
Fourthly We arrange the production.
Q5. MOQ ?
1 set machine, mixed order is also welcomed.
Q6. How do you ship the goods and how long does it take to arrive?
A: Ship by Sea, CIF, DDP. It takes 25-35 days to arrive.
Q7. What about the lead time?
A: Stock is 3-7 days, 15-25 working days for mass production.
Q8. What is your payment method?
A: 30% Advance TT, 70% TT When the Goods are ready for Shipment.
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
5000000-8000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Established in 2008, Shenzhen Hongxinteng Technology Co., Ltd. is a leading manufacturer of Surface Mount Technology (SMT) machines, providing comprehensive solutions for the PCB and electronic manufacturing industries with competitive price supplier in China. We specialize in the design, produ... Established in 2008, Shenzhen Hongxinteng Technology Co., Ltd. is a leading manufacturer of Surface Mount Technology (SMT) machines, providing comprehensive solutions for the PCB and electronic manufacturing industries with competitive price supplier in China. We specialize in the design, produ...
Get in touch with us
Leave a Message, we will call you back quickly!