Product Specification

Full Automatic PCB Cleaning Machine High Efficiency Ultrasonic Cleaner PCBA Water Cleaning Washing Machine with CE certificate

Description

Automatic PCBA Cleaning Machine
SME-5600  is an energy-saving, environmental protective,  integrated, high-end cleaning machine. It can automatically complete cleaning, rinsing, drying process in one chamber by just push the start key.

Key Features:

1. The whole process  visible : the cleaning process can be visible through the front window and LED light.

2. Automatic cleaning mode: clean, rinse, dry process can complete in one compact machine.

3. The most scientific nozzle design: the use of left and right incremental arrangement --- to enhance cleaning efficiency,back and forth movement of basket - completely solve the cleaning blind area;

4. The nozzle pressure adjustable design: to solve the small and light PCBA in the high pressure spray under the conditions of the collision, splash problem;

5. The standard dilution tank heating system: greatly improve the cleaning efficiency. Shorten the cleaning time;

6. A comprehensive cleaning system: for SMT; THT PCBA after welding the surface of the residual rosin, water-soluble flux, no-clean flux / solder paste and other organic and inorganic pollutants for thorough and effective cleaning;

7. Convenient cleaning dilution to add: can be manually added, but also by setting the ratio (5% to 25%) automatically with DI water and chemical liquid (option).

8.  Temporary tank and auxiliary heating system: Temporary tank is used to store dilution and DI water. 

During cleaning process, the  air pump absorb dilution form dilution tan and send to temporary tank ,then wash pump absorb dilution from temporary tank to clean PCBA. After cleaning process, the air pump absorb dilution from temporary tank  and send them back to dilution tank. 

During rinsing process, the air pump absorb DI water from DI water produce machine and send it to temporary tank, each time after rinsing ,DI water will be discharged form temporary tank. The rinse water can be heated as needed;

9. Lower operating costs: built-in filter makes the dilution repeated used. By using compressed air blow method at the end of cleaning process : blow the residual detergent off from pipeline and the pump , which effectively save 50% dilution.

10. The concentration lqiuid compensation function: the concentration of dilution will be getting lower and lower after repeated use which will affect the cleaning effect and cleaning efficiency of PCBA, at this time , need to add some concentrated liquid  to dilution tank to compensate the dilution concentration. concentration compensation can improve the effective use of liquid, the concentration liquid adding amount can be adjustable according to the real situation.

DI Water Machine (DI-250)
If customer has no DI water then they need to buy one DI water machine.

1. DI water machine is used to turn tap water into DI water and supply to the PCBA cleaning for rinsing after cleaning.
2. DI water will be discharged after rinsing and normally need to rinse 3~4 times after cleaning, each rinse will cost 20L DI water.
3. DI-250 DI water machine will produce 250L DI water in one hour.
4. DI-250 DI water outlet  resistance is ＞10MΩ

Product Specification

Application

Car electronics  PCBA, Military PCBA, Aerospace PCBA, Telecom PCBA, Medical device PCBA, Digital meters  PCBA.

For Rosin flux, No-clean flux,Water-soluble flux , Solder paste ball and other organic and inorganic pollution materials on SMT and THT PCBA.