Product Specification

Full Automatic Bga Rework Station Automatic Bga Rework Station Price Rework Station Bga Smt Line Machine Bga Rework Soldering Station Smd Rework Station

Description

Functional characteristics:

1. High brightness LED lamp shadowless lighting, check the motherboard chip at a glance bad;

2. Breeze adjustment function, according to the chip size to adjust different wind speed, repair more efficient, welding small chip will not blow away;

3. External USB interface, a variety of repair data can be imported into the computer analysis and storage;

4. With vacuum suction pen, it is more convenient to take and put chips;

5. External temperature measuring interface, more accurate temperature detection;

6. Touch screen operation, built-in intelligent repair procedures, repair data real-time display and automatic analysis, let you become a technical god seconds; 7. Suitable for a variety of chip rework (POP, SOP, SOJ, QFP, QFN, BGA, PLCC, SCPP...) 

Product Specification

Product description

1. Embedded Industrial Control Computer, high-definition touch-screen human-machine interface, heating temperature, time, slope, cooling, vacuum are all set on the human-machine interface, real-time display settings and measured temperature curve, and has the instantaneous curve analysis function, carries on the analysis correction to the curve in real time;

2. There are three temperature zones which can be heated independently, and each zone can be set up with 8-stage temperature control. The three temperature zones adopt independent PID algorithm to control the heating process. Large preheating temperature zone, PCB preheating equilibrium deformation;

3. It can store 9999 sets of temperature curves and call them according to different BGA at any time. It can also analyze, set and modify the curves on the touch screen, to facilitate domestic and foreign customers barrier-free use;

4. High-precision K-type thermocouple closed-loop control and temperature automatic compensation system can achieve accurate temperature control and keep temperature deviation at ± 2 degrees. At the same time, the external temperature measuring interface realizes the precise detection of temperature, and the accurate analysis and calibration of the measured temperature curve;

5. The positioning of PCB board adopts v-shaped slot, flexible and convenient movable universal fixture can protect PCB board, prevent PCB edge damage and PCB deformation, and satisfy the positioning of different size PCB board  

6. With double password protection, to prevent the program and parameters are arbitrarily modified or accidentally deleted, with superior security protection functions;

7. Equipped with a variety of alloy nozzle, the nozzle can be 360 degrees arbitrary rotation positioning, easy to install and replace;

8. After the upper and lower hot air stop heating, the cooling system starts automatically, and the high-power cross-flow fan cools the PCB board quickly to prevent the PCB board from being deformed, and the cooling system stops automatically when the temperature drops to normal temperature, ensure that the machine will not be in heat aging, effectively extend the service life of equipment;

9. Built-in vacuum pump, no external air source, in any place can be used directly on the power supply, not limited by the air source, external vacuum suction pen, for easy access to BGA chip;

10. USB interface, easy to download the current curve to the U disk storage, and can plug in the mouse to use, extend the use of touch screen time;

11. Configure voice-activated"Early warning" function. 5-10 seconds before the completion of the dismantling and welding to alert the workers to prepare by voice control; 12. After CE certification, equipped with emergency switch and emergency automatic power-off protection device, in the case of temperature out of control, the circuit can automatically power-off.

Applications:

Widely used in electronics manufacturing, consumer electronics, automobile electronics, communications equipment, aerospace, medical equipment, LED lamps, computers and peripherals, smart home, smart logistics, miniature and high power ratio electronic devices.

Company profile

FAQ

Q1. This is the first time I use this kind of machine, is it easy to operate?

A: There is an English manual and guide video that show you how to use machine. We also can provide engineers to your factory for your installation training. If you still have any question, please contact us by e-mail / Skype/ phone / trade manager online service.

Q2: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty and after-sales for life.

Q3. If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG , we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

Q4. How to proceed an order for SMT Loader machine?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the details and places deposit for formal order.

Fourthly We arrange the production.

Q5. MOQ ?

1 set machine, mixed order is also welcomed.

Q6. How do you ship the goods and how long does it take to arrive?

A: Ship by Sea, CIF, DDP. It takes 25-35 days  to arrive.

Q7. What about the lead time?

A: Stock is 3-7 days, 15-25 working days for mass production.

Q8. What is your payment method?

A: 30% Advance TT, 70% TT When the Goods are ready for Shipment.