9CH Kic Reflow ProfilerKic 2000 Reflow Oven Temperature Tester

• automatic thermocouple location settings import.
• the temperature curve assessment automation.
• automatic visualization operation instructions.
• the instrument overheating or battery power is too low will automatically give instructions to stop the temperature curve test.
• automatic retrieval to ensure the integrity of the temperature curve data.
• the production process to determine the stability of the stability.

Product Name: Temperature recorder

Product Type: KIC2000

KIC2000 furnace temperature tester is a revolutionary test equipment. Software updates are now Profiling Software. At the same time on the basis of the original increase in more process curve application project, to give users a more relaxed job needs.

Measuring range: -50-1050 (ºC)

Temperature resolution: 0.1 ºC

Dimensions: 320 * 86 * 26 (mm)

1. Accuracy: +/- 1.2 ºC
2. Resolution: 0.3 ºC ~ 0.1 ºC
3. Internal operating temperature: 0 ºC ~ 105 ºC
4. Applicable thermocouple: 9/12 K-type thermocouple
5. Measuring temperature range: -50 ºC ~ 1050 ºC
6. System compatibility: PC is compatible
7. Power requirements: 9 V alkaline batteries
8. Size (with standard insulation): length 320 * width 86 * 26 cm high

1. First check the battery power is sufficient, if less than 20% had to charge, followed by the instrument if the surface temperature is higher than 45 ºC Please do not charge, as far as possible room temperature charge.
2. Typical reasons for the problems that arise when establishing a communication link:
   • A, the communication line is not fully inserted - make sure that the correct jack is used
   • B, the communication line or connector is damaged - check for breakage or other damage. Replace the C battery if necessary. - Charge and make sure the charging LED is on.
3. Insulation box can be up to 280 ºC temperature conditions for 9 minutes, be sure to exceed this range, to ensure that the internal temperature of the instrument does not exceed 85 ºC.
4. Do not use the data for a long time. Please observe whether the data indicator is flashing every 5 seconds or so. If you are blinking, press and hold the "Start" button for 5 seconds at the same time until the indicator light flashes and then observe until there is no light The
5. When the furnace, please be sure to cover the insulation box, hear the "carbazole" as soon as the sound
6. Only one oven tester can be connected to the computer at a time. You can not connect multiple recorders to the same USB port on your computer.
7. After a furnace once again furnace, and other insulation box after cooling and then use

We are smt support provider for smt machine parts and equipment .such as reflow solder oven, Wave Soldering Machine, Pick and Place Machine, SMT PCB Printer, SMT AOI SPI Machine, SMT Reflow Oven, PCB conveyor, smd counter,loader & unloader machine ,nozzle/ feeder, feeder storage cart smt reel rack, smt grease , solder paste mixer, KIC thermal profiler,smt tape,SMT Assembly line and so on .

In 2009, Shenzhen wenzhan Technology Co., Ltd. was established to build a more timely and effective communication platform, and realize the company's service tenet of serving leading customers.The engineers of the company are professional technicians who have been certified by the original factory for more than 10 years. They always adhere to the value of putting the interests of customers first, and provide customers with high-quality equipment accessories, consumables, fixtures and technical support services.

In order to effectively reduce the cost of customers, the company set up a machining plant, and changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and reduce the cost of customers at the same time.

It is precisely because wenzhan technology has the following advantages over the same industry that more and more customers choose wenzhan as their preferred supplier.

1. Professional pre-sales advice support
2. Excellent after-sales technical service
3. Flexible payment and return policy
4. One stop solution for SMT accessories
5. Stock in the factory with sufficient stock and fast delivery