Shenzhen Socay Electronics Co., Ltd.
| Delivery Time | 5-8 work days |
| Packaging Details | AMMO packing bulk |
| Product Name | Spark Gap Protectors (SPG) |
| Package Type | Axial Lead |
| VS | 140(119~221)V |
| IR/DC | 100M/50V |
| C | 1.0pF |
| 8/20μS | 1000A |
| Surge Life Test | 10KV / 150A , >200T |
| Brand Name | SOCAY |
| Model Number | SCB-141N |
| Certification | REACH,RoHS,ISO |
| Place of Origin | Shenzhen, Guangdong, China |
View Detail Information
Explore similar products
Axial Lead Glass Discharge Tube SCA-141N 1.0pF 8/20μS 500A Spark Gap Protectors
SCBE-141N Axial Lead Glass Discharge Tube SPG 140 VS Spark Gap Arrester
RoHS Compliant Glass Discharge Tube SCC-141N SPG Spark Gap Protectors
SPG Gas Glass Discharge Tube SCCE-141N 3000A High Isolation Spark Gap Protectors
Product Specification
| Delivery Time | 5-8 work days | Packaging Details | AMMO packing bulk |
| Product Name | Spark Gap Protectors (SPG) | Package Type | Axial Lead |
| VS | 140(119~221)V | IR/DC | 100M/50V |
| C | 1.0pF | 8/20μS | 1000A |
| Surge Life Test | 10KV / 150A , >200T | Brand Name | SOCAY |
| Model Number | SCB-141N | Certification | REACH,RoHS,ISO |
| Place of Origin | Shenzhen, Guangdong, China | ||
| High Light | Glass Discharge Tube Axial Lead ，Glass Discharge Tube 1.0pF | ||
Axial Lead Glass Discharge Tube SCB-141N Vs 140(119~221)V 1.0pF @8/20μS 1000A Suitable for Power Supplies
DATASHEET: SCB_v2204.1.pdf
| Part Number | DC Spark-over Voltage Vs(V) | Minimum Insulation Resistance IR(OHM)/DC | Maximum Capacitance 1KHZ-6Vmax C (pF) | Surge Current Capacity 8/20 μS | Surge Life Test |
| SCB-141N | 140(126~210) | 100M / 50V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-181N | 180(126~234) | 100M / 50V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-201M | 200(160~240) | 100M /100V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-301M | 300(240~360) | 100M /100V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-401M | 400(320~480) | 100M / 250V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-501M | 500(400~600) | 100M / 250V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-601M | 600(480~720) | 100M / 250V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-701M | 700(560~840) | 100M / 250V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-102M | 1000(800~1200) | 100M / 500V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-122M | 1200(960~1440) | 100M / 500V | 1.0 | 1000A | 10KV / 150A , >200T |
| SCB-152M | 1500(1200~1800) | 100M / 500V | 1.0 | 1000A | 10KV / 150A , >200T |
Features:
| u Approximately zero leaking current before clamping voltage u Less decay at on/off state. u High capability to withstand repeated lightning strikes. u Low electrode capacitance (≤1.0pF) and high isolation (≥100MΩ). u RoHS compliant. u Bilateral symmetrical. u Temperature, humidity and lightness insensitive. u Working temperature: -45℃~ +125 ℃ u Storage temperature: -45℃~ +125℃ u Meets MSL level 1, per J-STD-020 |
Applications:
| u Power Supplies u Motor sparks eliminating u Relay switching spark absorbing u Data line pulse guarding u Electronic devices requiring UL497A and UL497B compliant u Telephone/Fax/Modem u High frequency signal transmitters/receivers u Satellite antenna u Radio amplifiers u Alarm systems u Cathode ray tubes in Monitors/TVs |
| Part Number | Color Code1 | Color Code2 | Color Code3 |
| SCB-141N | Black | Yellow | - |
| SCB-181N | Gray | - | - |
| SCB-201M | Red | - | - |
| SCB-301M | Orange | - | - |
| SCB-401M | Yellow | - | - |
| SCB-501M | Green | - | - |
| SCB-601M | Blue | - | - |
| SCB-701M | Purple | - | - |
| SCB-102M | Black | - | - |
| SCB-122M | Black | Red | Red |
| SCB-152M | Black | Green | Red |
| Items | Test Method | Standard |
| DC Spark-over Voltage | Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within 100V/s(Vs＜1000V) or 500V/s(Vs≥1000V). | Rate-of-change, within±30% insulation resistance & capacitance, conformed to rated spec. |
| Insulation Resistance | Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t over the DC spark-over voltage. | |
| Capacitance | Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHz) between terminals. | |
| Static Life | 10KV with 1500pf condenser is discharged through 2KΩ resistor. 200 times at an interval of 10sec. | ∣△Vs/Vs∣≤30% Characteristics of other items must meet the specified value |
| Surge Current Capacity | 1.2/50μs & 8/20μs, 1000A, electrically connected with a resistor (1~2 Ω), ±5 times, each time interval 60 seconds. Thereafter, outer appearance shall be visually examined. | No crack and no failures |
| Cold Resistance | Measurement after -40℃/1000 HRS & normal temperature/2 HRS. | Features are conformed to rated spec |
| Heat Resistance | Measurement after 125℃ /1000 HRS & normal temperature/2 HRS. | |
| Humidity Resistance | Measurement after humidity 90~95℃(45℃ ) /1000 HRS & normal temperature/2 HRS. | |
| Temperature Cycle | 10 times repetition of cycle -40℃ /30min →normal, temp/2 min →125℃/30min, measurement after normal temp/2 HRS. | |
| Solder Ability | Apply flux and immerse in molten solder 230±5℃ for 3sec up to the point of 1.5mm from body. Check for solder adhesion. | Lead wire is evenly covered by solder |
| Solder Heat | Measurement after lead wire is dipped up to the point of 1.5mm from body into 260±5℃ solder for 10sec | Conformed to rated spec |
| Pull Strength | Apply 0.5kg load for 10sec | Lead shall not pull out to snap |
| Flexural Strength | Bend lead wire at the point of 2mm from body under 0.25 load and back to its original point. Repeat 1 time. |
| DC Spark-over Voltage | Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within 100V/s(Vs＜1000V) or 500V/s(Vs≥1000V). | Rate-of-change, within±30% insulation resistance & capacitance, conformed to rated spec. |
| Insulation Resistance | Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t over the DC spark-over voltage. | |
| Capacitance | Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHz) between terminals. | |
| Static Life | 10KV with 1500pf condenser is discharged through 2KΩ resistor. 200 times at an interval of 10sec. | ∣△Vs/Vs∣≤30% Characteristics of other items must meet the specified value |
| Surge Current Capacity | 1.2/50μs & 8/20μs, 1000A, electrically connected with a resistor (1~2 Ω), ±5 times, each time interval 60 seconds. Thereafter, outer appearance shall be visually examined. | No crack and no failures |
| Cold Resistance | Measurement after -40℃/1000 HRS & normal temperature/2 HRS. | Features are conformed to rated spec |
| Heat Resistance | Measurement after 125℃ /1000 HRS & normal temperature/2 HRS. | |
| Humidity Resistance | Measurement after humidity 90~95℃(45℃ ) /1000 HRS & normal temperature/2 HRS. | |
| Temperature Cycle | 10 times repetition of cycle -40℃ /30min →normal, temp/2 min →125℃/30min, measurement after normal temp/2 HRS. | |
| Solder Ability | Apply flux and immerse in molten solder 230±5℃ for 3sec up to the point of 1.5mm from body. Check for solder adhesion. | Lead wire is evenly covered by solder |
| Solder Heat | Measurement after lead wire is dipped up to the point of 1.5mm from body into 260±5℃ solder for 10sec | Conformed to rated spec |
| Pull Strength | Apply 0.5kg load for 10sec | Lead shall not pull out to snap |
| Flexural Strength | Bend lead wire at the point of 2mm from body under 0.25 load and back to its original point. Repeat 1 time. |
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2004
Employee Number:
250~350
Ecer Certification：
Verified Supplier
SOCAY Electronics Co.,Ltd was established in 2004, with more than 600 employees and a production area of 40,000 square meters. Over the years,SOCAY has been committed to becoming the most professional one-stop electrionics omponents parts supplier. The main products involve various types of GDTs，... SOCAY Electronics Co.,Ltd was established in 2004, with more than 600 employees and a production area of 40,000 square meters. Over the years,SOCAY has been committed to becoming the most professional one-stop electrionics omponents parts supplier. The main products involve various types of GDTs，...
Get in touch with us
Leave a Message, we will call you back quickly!