3.6kW 5.12kWh All-in-One Solar ESS – 25.6V 200Ah LiFePO₄ for Home Backup & Off

Product Specification

One Unit. Whole-Home Backup.

3.6kW + 5.12kWh All-in-One ESS — Mobile, Solar-Ready, Reliable.

Part 1 – Overview & Features

Product Introduction

The ES Standard 3.6kW + 5.12kWh All-in-One Solar ESS is a compact, fully integrated energy storage system combining a 3.6kW hybrid inverter with a 25.6V 200Ah LiFePO₄ battery (5.12kWh). Designed for residential and small commercial use, it powers household appliances such as TVs, air conditioners, and lighting — all from a single, mobile cabinet.

With its all-in-one design, built-in MPPT, dual AC outputs, and mobile wheeled base, this system is easy to install, easy to move, and ready to deliver reliable backup power whenever the grid goes down.

Key Features

• All-in-One Integrated Design – Inverter, battery, MPPT, and BMS in one cabinet.

• 3.6kW Rated Output – Handles most household appliances with ease.

• 5.12kWh LiFePO₄ Battery – 25.6V 200Ah capacity for reliable backup power.

• 8,000+ Cycle Life – Designed for over 10 years of reliable performance.

• Pure Sine Wave Output – Clean power safe for sensitive electronics.

• Fast Transfer Time – 10ms (PC) / 20ms (household) for uninterrupted backup.

• Dual AC Outputs – Universal gauge AC output × 2 + ground wire output for flexible load management.

• High PV Input – Up to 5kW solar input, 100A max PV charging current.

• Wide MPPT Range – 40–450Vdc, compatible with most solar configurations.

• Mobile Wheeled Base – Built-in universal wheels for easy relocation.

• LCD Display – Real-time monitoring of system status and battery level.

• Comprehensive Protection – Overvoltage, undervoltage, overload, overcurrent, short circuit, and temperature protection.

• Quiet Operation – Suitable for residential environments.

Part 2 – Key Specifications (Table)

Inverter Specifications

Battery Specifications

Part 3 – Details & Convenience

All-in-One. Mobile. Easy to Install.

The ES Standard 3.6kW + 5.12kWh ESS is designed for maximum convenience and flexibility:

• Fully Integrated Cabinet – Inverter, battery, MPPT, and BMS all in one unit. No separate components, no complex wiring.

• Mobile Wheeled Base – Built-in universal wheels make it easy to move the unit to any location.

• Dual AC Outputs – Universal gauge AC output × 2 + ground wire output for flexible load management.

• LCD Display – Clear real-time readout of battery SOC, input/output power, and system status.

• LED Status Indicators – AC, INV, charge, and fault lights for instant system diagnostics.

• Multiple Communication Ports – USB, RS485, and dry contact for seamless integration.

• Multiple Charging Modes – PV, AC, or mixed charging for maximum flexibility.

• Built-in BMS – Intelligent battery management for safety and longevity.

• Quiet Operation – Suitable for residential environments.

Safety First

• LiFePO₄ Technology – No thermal runaway, no fire risk, no toxic fumes.

• Multi-Layer BMS Protection – Overcharge, over-discharge, overcurrent, short circuit, and temperature protection.

• Rigorous Testing – Passed short circuit, overcharge, over-discharge, damp heat, and thermal shock tests.

• IP21 Protection – Suitable for indoor installation.

• Vibration & Shock Resistant – Designed for safe transport and installation.

Part 4 – Application Scenarios

Where Can You Use It?