Product Specification

Supply Ability	Available for long-term and short-term supply	Packaging Details	Wooden cases
Brand Name	YOHA	Model Number	YOHA-10MWp
Certification	CE	Place of Origin	China
High Light	pv module production line ，turnkey solar panel production line ，solar panel production line machinery

5-10Mwp Solar Panel Production Line

 

 

 

5-10Mwp Manual Solar Panel Line
No.	Equipment	Model	Qty
	Name
1	Manual EVA/TPT Cutting Table	RJCJT	1
3	Ribbon cutting machine	YS-100	1
4	Manual Cell Welding Table	3 sections	2
5	Soldering Iron	203H ESD	15
7	Laying work station	L2000 *W1200* H800	2
8	Observation Table	L2000*W1500*H1080	2
9	Trolleys	Cell transfer	2
		Pre-lamination	2
		After-lamination	2
10	Semi-Auto Laminator	YDB-2222	1
11	Trimming Table		2
	Framing Machine	RJZK2M	1
	JunctionBox Installation Table		2
12	IV Tester	YHMT-A	1
Optional Machines
1	Cell Sorter	YHCT-A	1
2	Laser Scribing Machine	YHC-20F	1
3	IV Tester	YHMT-AAA	1
4	Full Auto Laminator	YDB-2236	1
5	EL Tester	YHEL-2400	1

 

Solar Panel EVA/TPT Cutting Table

Model:YDD-CT

3150*1200*900mm

1. Aluminum alloy frame with Feeding shaft,can cut EVA and also TPT.

2.8mm glass working plat with 2M steel rule.

3.Flat working plat.

4.Adjusted screws in feet part.

5.Panels are compression plate,Graduated scale in plate for convenient cutting size.

6.Sliding bearing to chose EVA/TPT,Flexibility is good,here is positioning device and cut EVATPT at the same time.

 

 

 

 

 

Technical specifications:

Application:

Used to test the electrical performance of Mono-Si or Poly-si solar cell pieces and record the results in files.

Type specification: YHCT-A

 

Machine Feature:

• A grade spectrum
• A grade unevenness degree of irradiance
• Four-line measure, 14-bit 4-channel high speed synchronous acquisition card
•    10 parameters display and Measurement Parameter display in Tabulation and Graphic way
• Pneumatic and buffering contact
• Temperature automatically compensation
• Voice counts off and prompts, Counting prompt of flash
• 24hours Continuous work

 

Specifications :

 

Solar Cell Tester

1. Test Size: 200X200mm

2. 2Test rang:0W-16W

3. Package Measurement: 94X80X210 CM

4. Gross Weight: 158KG

 

Technical Parameter:

• Lamp Spectrum: In line with IEC60904-9 and JISC8933 ( A Grade)
• Light Intensity: 100mW/cm2 (continuous adjustable range 20-120W/cm2
• Light intensity non-uniformity: ≤ ± 3% A ≤ ± 2% AAA
• Instability degree of irradiation: ≤ ± 3% A ≤ ± 2% AAA
• Test result consistency: ≤ ± 0.1% A ≤ ± 0.05% AAA
• Test error of electrical properties: ≤ 1% A
• Single flash time: 10-30ms
• Effective test range: 200X200mm(0.1-16W)
• Measuring voltage: 0 - 0.8V (resolution 1mV)
• Measuring current: 0 - 20A (resolution 1mA)
• Test parameters: Isc, Voc, Pmax, Vm, Im, FF, EFF, Temp, Rs, RSH
• Power demand: 220V/50HZ/2KVA

 

Solar cell laser scribing machine

Model:YHC-30F

 

 

Model	YHC-10F	YHC-30F
Laser wave length	1064nm
Laser power	10w/30W(Pulse)
Scribing width	30μm
Scribing speed	200mm/s~300mm/s
Scribing accuracy	±10μm
Working area	200X200mm
Working power	220V/50Hz/1kVA
Working table	negative pressure adsobing and dust elimination
Cooling method	forced air cooling
Maintenance free time	100,000 hours

 

Other Requirements:

 

1.The entire equipment's electrical and gas usage must comply with national standards.

2.The equipment must have overload protection.

3.The equipment must have preventive measures for stability.

4.The equipment's floor space must be designed based on the actual site.

5.The equipment must have various abnormal alarms and display systems

 

 

Solar Cells Automatic Tabber Stringer

Operating Speed:Not less than 1600 pieces/hour Soldering Defect Rate:≤2%

Applicable Busbar Specifications: Traditional standard 1~6 busbars

Applicable Ribbon Specifications: Width 1.0-2.0mm,Thickness 0.1-0.16mm

Applicable Cell Size: 156mm,158mm,166mm,182mm cut cells

Maximum Cell String Length:Up to 650mm

Soldering Method:Infrared soldering

Power Supply:AC 220V 50/60Hz Single-phase 3-wire,Power:10KW Compressed Air:Pressure:≥0.5MPa,Flow:≥100L/min

Equipment Dimensions: Not less than

Length:2250mm*Width:1080mm*Height:2000mm

 

Ribbon cutting machine YS-100

Parameter

 

Electrical Source	220/110V 50/60HZ
Power	250W
Cut Length	From 0.1 MM to 9999.9MM
Cut Width	From 0.1 MM to 100MM
Cut Speed	From 50 PCS to 120PCS per minute depending on length
Net Weight	30KG
Outer size	L360*W300*H350 mm
Packaging detail	Carton or wooden case within foam plastics

 

Solar Panel Welding Station

Model:YDD-WT

Solar Panel Welding Table and the Soldering Jig

1,Single heating plate:220×200×12mm Power 44W Voltage 220V

2,Stringing heating plate:200×1600×12mm Power 300W Voltage 220V

Stringing plate has two kinds:Punching knock of stainless steel and molding template

3,Stringing Pallet:2000*180*15mm,Aluminum profile and oxidation treatment

 

 

Soldering Iron

 

Temperature range 50℃-600℃

 

Temperature stability	±2℃(stationary air,no load)
Input voltage/Frequency	220V/110V 50Hz/60Hz
Output voltage/Frequency	36V AC 400KHz
Max power	90W

 

 

· Steel welding and polish,coating surface.

· All argon arc welding,Polish,good appearance.

 

 

Trolley Type 3-Solar stringer trolley Size:1600*800*1350mm

· Each side has 10 floor,total is 20 floor.

· Transfer cell box.

· Four universal wheel,two of them is brake,it is convenient to move.

· All argon arc welding,polish,good appearance.

 

 

Trolley Type 4-Turnover Vehicle for glass,pre-Framed,module. Size:1800*1000*1250mm

· steel welding,coating surface with non-slip rubber

· Four universal wheel two of them is brake,it is convenient to move.

· All argon arc welding,Polish,good appearance.

 

Trolley Type 4-Turnover Vehicle for to be laminated

Size:1100*1000*1450mm

· Steel pipe coating,ten floor.

· Cotton padded covering,not easy to break.

· Four universal wheel,two of themis brake,it is convenient to move.

· All argon arc welding,polish,good appearance.

 

Semi-automatic Laminator

 

 

Technical Parameters

Model		Laminator-1832	Laminator-1834	Laminator-2224	Laminator-2236
Weight(KG)		15000	15500	16500	17500
Total power(KW)		48	48	75	75
Power voltage		AC 380V3-phase
Effective Lamination Area
Laminate Length*Width	1800mm*3200mm		1800mm*3400mm	2200mm*2400mm	2200mm*3600mm
Max.Laminate Thickness	28mm
Oil Heating Process
Max.Temperature	180℃
Temperature Uniformity	±2℃
Temperature accuracy	±0.8℃
Compressed air pressure	0.4-1.0Mpa
Heating part power(KW)	36			60
Vacuum System
Vacuum rate	70 L/sec
Ultimate vacuum	20Pa
Vacuum time	300 seconds
Loading /Unloading
Automatic Module Loading	Yes
Automatic Module Unloadin 9	Yes
Operation Environment
Ambient temperature	OoC-50oC
Relative humidity	<90%
Altitude	3000m

 

 

Solar Panel Framing Machine

Application:Frame aluminum frame into module Power:220V

Air source:0.7-0.8Mpa,Air flow:5L/min

Min framing dimension:300×300×50(35)mm,

Max framing dimension:2100×1100×50(35)mm Framing speed:50second/piece

Trimming Table

Junction Box Installation Table

Size:1200*600*900

 

Solar Simulator

 

 

 

Application:

Mainly used in automatic test and result record of solar mono-crystalline silicon,poly-crystalline silicon solar cell

module and thin-film module.

Products Features:

1.Flash impulse continuous adjustable range 10-100ms

2.Four-line measurement;14-bit 4-channel high-speed synchronous acquisition card,8000 data collecting point;

3.10 parameters display;measured parameter display in tabulation and graphic way;

4.Irradiance automatically compensating;temperature automatically compensating;

5.Voice counts off and prompts of flash time;counting prompts of flash time

6.24 consecutive hours of work,working life of imports Xenon lamp is 300,000 times of flash Technical Data:

Model	YHMT-AAA YHMT-A
Lamp Spectrum	In line with IEC60904-9 and JISC8933(A Grade)
Light Intensity	100mW/cm2(continuous adjustable range20-120mW/cm²)
Light intensity non-uniformity	≤±2%[A] ±3%
Instability degree of irradiation	≤±2%[A] ±2%
Test results consistency	≤±0.5%[A] ±1%
Test error of electrical properties	≤2%
Single flash time	10ms-30ms 10ms
Effective Test Range	2400*1200nm /5W-550W
Measuring Voltage	0-100V(Resolution 1mV)
Measuring current	0-20A(Resolution 1mA)
Environmental temperature	15℃~30℃
Test Parameters	Isc,Voc,Pmax,Vm,Im,FF,EFF,Temp,Rs,Rsh
power	220V/50Hz(60Hz)

 

 

Tabbing and Stringing Jig(with Heater)

 

Size:2000*180*10mm

Aluminum alloy material with surface oxidation treatment Precision within+/-0.05mm.

 

Storage Boxes

 

Size:2000*180*15mm

Aluminum alloy material for Cell strip transfer

 

 

 

Optional Machines

 

 

 

Solar Panel EL tester

Model:YHEL-2400

 

 

Application:

Defects of solar cell material(debris,cracked,broken gate,pollution);

Defects from the welding process(weld,desoldering);

Mix different levels cell

Technical Features

 

Its highly sensitive infrared camera can defective solar module, which

can help users know the solar module and panel from defects in material or workmanship defects

The equipment can be applied before and after lamination process, defect

detector is an important and effective process monitoring and testing equipment

It consists of a set of specialized optical imaging systems and high-sensitivity camera module, which is available to user in the preparation process, product quality testing

 

Technical Data: Product model	YHEL-2400
Resolution	6016x4000 Megapixels
Shooting mode	Sing camera
Sensitivity	Can detect crack width less than 0.03mm
Effective test area	2600*1500mm
Image acquisition time	1~60s can be adjusted
Machine size	2900*1940*1155mm
Power	Single-phrase 220V 20A, max load voltage 100V, max load currency20A
Working environment temperature	-10~40℃
SNR	>56dB
Humidity	20 ~70%
Test parameters	Target, Gain, Time, Gamma, Contrast, Data wide
Include	Cabinet(Include infrared camera)+Computer + Softwar