Upgrade Your Windows and Facades with Double Glazed Insulated Glass for Superior

Product Specification

​​Double Glazed Insulated Glass (DGU) – Technical Specifications & Performance Guide​​

Double glazed insulated glass units (IGUs) are engineered assemblies consisting of two or more glass panes separated by a hermetically sealed spacer system, creating an insulating air or gas-filled cavity. This construction provides superior thermal and acoustic performance compared to monolithic glass.

​​Structural Composition & Configuration Options​​

1. ​​Standard Construction​​

   • ​​Glass:​​ 2 panes (3-12mm each)

   • ​​Spacer:​​ Aluminum/Stainless Steel (6-20mm width)

   • ​​Sealants:​​ Primary (PIB) + Secondary (Silicone/Polysulfide)

   • ​​Gas Fill:​​ Argon (90%), Krypton (high-performance), or Air

2. ​​Advanced Configurations​​

   • ​​Triple Glazing:​​ 3 panes + 2 cavities (U-value down to 0.4 W/m²K)

   • ​​Asymmetrical:​​ Different thicknesses (e.g., 6mm outer + 8mm inner)

   • ​​Hybrid Units:​​ Combined with Low-E coatings or laminated layers

​​Thermal Performance Metrics​​

Center-of-glass values for 4-12-4 configuration

​​Acoustic Performance Data​​

1. ​​Sound Transmission Class (STC)​​

   • ​​4mm/12mm Air/4mm:​​ STC 32

   • ​​6mm/16mm Argon/6mm:​​ STC 36

   • ​​Laminated Variant:​​ STC 42+

2. ​​Frequency-Specific Attenuation​​

   • ​​500Hz:​​ 25-35dB reduction

   • ​​1000Hz:​​ 30-40dB reduction

   • ​​2000Hz:​​ 35-45dB reduction

​​Spacer Technology Comparison​​

​​Gas Fill Performance​​

​​Manufacturing Standards​​

1. ​​Quality Control​​

   • Moisture vapor transmission <0.05g/m²/day

   • Gas retention >90% after 15 years

   • Sealant adhesion >0.5N/mm²

2. ​​Certifications​​

   • EN 1279 (European IGU standard)

   • ASTM E2190 (North America)

   • GB/T 11944 (China)

   • ISO 20492 (Global performance)

​​Installation Requirements​​

1. ​​Glazing Systems​​

   • Minimum 15mm edge cover

   • Thermal break framing recommended

   • Structural silicone bonding options

2. ​​Environmental Limits​​

   • Maximum altitude: 3000m

   • Temperature range: -40°C to +80°C

   • Pressure differential: ±3000Pa

​​Durability Testing Protocols​​

1. ​​Climate Resistance​​

   • 1000 cycles (-20°C to +60°C)

   • 5000hr humidity exposure (85°C/85%RH)

   • UV aging per ISO 4892-3

2. ​​Structural Testing​​

   • Wind load resistance (EN 12179)

   • Water penetration (ASTM E331)

   • Air infiltration (ASTM E283)

​​Leading Manufacturers​​

1. ​​Guardian Glass (ClimaGuard®)​​

   • U-value as low as 0.5

   • 25-year performance warranty

2. ​​Saint-Gobain (SGG ClimaPlus®)​​

   • Warm edge spacer systems

   • PHI-certified options

3. ​​AGC (EnergyNXT™)​​

   • Triple silver Low-E variants

   • Self-cleaning IGU options

4. ​​NSG (Pilkington Insulight™)​​

   • Krypton-filled units

   • Acoustic-specific designs

​​Sustainability Features​​

• 30% recycled glass content

• Argon from air separation byproducts

• Warm edge spacers reduce edge losses

• Contributes to LEED v4.1 credits:

  • Thermal Performance (EQ)

  • Daylight Optimization (EQ)

​​Failure Modes & Prevention​​

1. ​​Gas Loss​​

   • Cause: Seal failure

   • Prevention: Dual-seal systems

2. ​​Condensation​​

   • Cause: Desiccant saturation

   • Prevention: Molecular sieve quality control

3. ​​Glass Breakage​​

   • Cause: Thermal stress

   • Prevention: Edge deletion for coated glass

​​Technical Support Services​​

1. ​​Performance Modeling​​

   • THERM/WINDOW simulations

   • Condensation risk analysis

2. ​​Custom Engineering​​

   • Curved IGUs (R>1000mm)

   • Structural glazing solutions

3. ​​Quality Verification​​

   • Gas concentration testing

   • Sealant adhesion checks

​​