Shenzhen Sopto Technology Co., Ltd
| Delivery Time | 3-5 working days |
| Payment Terms | T/T; L/C; Paypal |
| Transmission distance | 10 / 20 / 40 / 40 / 80km |
| Wavelength | 1270nm&1330nm or 1490nm&1570nm |
| Data rate | 10Gb/s |
| Fiber type | Single Fiber Single Mode |
| Interface | Simplex LC |
| Application | 10GBASE-SR/LR/ER/ZR Ethernet |
| Brand Name | Sopto |
| Certification | ISO9001 / CE / RoHS |
| Model Number | SPT-PB2733TG-LXX |
View Detail Information
Explore similar products
16G SFP+ Optical Transceiver Duplex LC Interface With Low Lower Dissipation
SM 10Gb/S BIDI XFP Fiber Optic Transceiver With Simplex LC Interface
SFP+ Fiber Optic Transceiver Duplex LC Interface For 8G/16G Fiber Channel Links
6G LTE SFP Module Single Mode SM / MM Fiber With DDM Commercial Temperature
Product Specification
| Delivery Time | 3-5 working days | Payment Terms | T/T; L/C; Paypal |
| Transmission distance | 10 / 20 / 40 / 40 / 80km | Wavelength | 1270nm&1330nm or 1490nm&1570nm |
| Data rate | 10Gb/s | Fiber type | Single Fiber Single Mode |
| Interface | Simplex LC | Application | 10GBASE-SR/LR/ER/ZR Ethernet |
| Brand Name | Sopto | Certification | ISO9001 / CE / RoHS |
| Model Number | SPT-PB2733TG-LXX | ||
| High Light | fiber sfp module ，fiber optic sfp module | ||
10G BIDI SFP+ Transceiver Modules up to 80km Simplex LC Interface with DDM Function
10G BIDI SFP+ transceiver modules are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by usually using 1330(1270nm) transmitter and 1270(1330) nm receiver. Sopto supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell, etc.) compatible fiber optic transceivers.
Features
● Simplex LC Interface
● Built-in digital diagnostic functions
● 1270nm&1330nm or 1490nm&1570nm
● Up to 11.3 Gbps Bi-directional Data Links
● Single Fiber Bi-Di SFP+ Optical Transceiver
● Transmission distance up to 80km over SMF
● Operating Case Temperature: Standard: 0~70°C; Extended: -20~85°C; Industrial: -40~85°C
Compliant
● RoHS-6
● SFF-8472
● SFP+ MSA
● IEEE 802.3ae 10GBASE-BX or SDH/SONET standards
Sopto fiber optic transceiver took the first lead to pass the ISO9001 quality system, the requirements of European CE, RoHS.
Pin Descriptions
Figure1.Elecctrical Pin-out Details
| Pin | Symbol | Name/Description |
| 1 | VEET [1] | Transmitter Ground |
| 2 | Tx_FAULT [2] | Transmitter Fault |
| 3 | Tx_DIS [3] | Transmitter Disable. Laser output disabled on high or open |
| 4 | SDA[2] | 2-wire Serial Interface Data Line |
| 5 | SCL[2] | 2-wire Serial Interface Clock Line |
| 6 | MOD_ABS[4] | Module Absent. Grounded within the module |
| 7 | RS0[5] | RS0 for Rate Select: Open or Low = Module supports ≤4.25Gbps High = Module supports 9.95 Gb/s to 10.3125 Gb/s |
| 8 | RX_LOS[2] | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1[5] | No connection required |
| 10 | VEER[1] | Receiver Ground |
| 11 | VEER[1] | Receiver Ground |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled |
| 13 | RD+ | Receiver DATA out. AC Coupled |
| 14 | VEER[1] | Receiver Ground |
| 15 | VCCR | Receiver Power Supply |
| 16 | VCCT | Transmitter Power Supply |
| 17 | VEET [1] | Transmitter Ground |
| 18 | TD+ | Transmitter DATA in. AC Coupled |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled |
| 20 | VEET [1] | Transmitter Ground |
Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. should be pulled up with 4.7k – 10k ohms on the host board to a voltage between 3.15Vand 3.6V.
3. Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
4. Mod_ABS is connected to Veet or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range of 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot.
5. RS0 and RS1 are module inputs and are pulled low to Veet with > 30 kΩ resistors in the module.
Recommended Interface Circuit
Figure2. Host Board-Power Supply Filters Circuit
Figure3. Host-Module Interface
Mechanical Dimensions
A : LC Receptacle
B : SC Receptacle
All-optical transceivers are RoHS compliant and could be 100% compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent, Foundry, Nortel, Force10, etc.
If you want to know more about the exact information of the specified transceiver or get the price
Applications
● SONET OC-192 / SDH STM-64
● OTN ITU-T G.709
● 10GBASE-SR/LR/ER/ZR Ethernet
● 10X/8X/4X/2X/1X Fibre Channel
Ordering Informations
| Products | Data Rate(Gbps) | Distance | Fiber | Output Power(dBm) | Sensitivity(dBm) | Interface | Temp. | DDM |
| SPT-PB2733TG-L10/ SPT-PB3327TG-L10 | 9.95~11.3 | 10km | SM | -6～-1 | -14.5 | Simplex LC | 0-70℃ | D |
| SPT-PB2733TG-L20/ SPT-PB3327TG-L20 | 9.95~11.3 | 20km | SM | -3～-2 | -14.5 | Simplex LC | 0-70℃ | D |
| SPT-PB2733TG-L40/ SPT-PB3327TG-L40 | 9.95~11.3 | 40km | SM | 0～5 | -16 | Simplex LC | 0-70℃ | D |
| SPT-PB2733TG-L60/ SPT-PB3327TG-L60 | 9.95~11.3 | 60km | SM | 1～5 | -22 | Simplex LC | 0-70℃ | D |
| SPT-PB47TG-L80/ SPT-PB74TG-L80 | 9.95~11.3 | 80km | SM | >1 | -22 | Simplex LC | 0-70℃ | D |
Company Details
Business Type:
Manufacturer,Trading Company,Seller
Year Established:
2006
Employee Number:
350~400
Ecer Certification：
Active Member
Shenzhen Sopto Technology CO., LTD, hereafter called as Sopto, is a hi-tech enterprise specialized in R&D,manufacturing marketing and solution service of ICT network infrastructure. Sopto provides first-rate products and comprehensive FTTX solution, site(LTE) solutions, and Data Center ... Shenzhen Sopto Technology CO., LTD, hereafter called as Sopto, is a hi-tech enterprise specialized in R&D,manufacturing marketing and solution service of ICT network infrastructure. Sopto provides first-rate products and comprehensive FTTX solution, site(LTE) solutions, and Data Center ...
Get in touch with us
Leave a Message, we will call you back quickly!