| Resistance Accuracy | ±5% ( J ) |
| Supply Ability | Depending on the specific circumstances, it generally takes 5-7 work days to complete |
| Dimensions | Please check the attachment |
| Fusing Characteristics | 25 times of rated wattage (Fusing time is within 60 seconds) |
| Nonflammability | 16 times of rated wattage for 5 min ( not flamed ) |
| Payment Terms | T/T |
| Delivery Time | 7-10 work days |
| Packaging Details | T/B |
| Moisture-proof Load Life | Rated power load 90 minutes ON 30 minutes OFF 40°C 95% RH 1000 hours ( ΔR/R≤±5% ) |
| Resistance Range(Ω) | 1~20Ω |
| Brand Name | TYOHM |
| Model Number | FKN-H |
| Certification | |
| Place of Origin | China |
View Detail Information
Explore similar products
2WS Fusible Resistors Wire Wound Power Resistor
5.1Ohm 2WS Composite Fuse 1A Thermal Fuse Resistor IEC 61000-4-5
UL1412 Approved 5W Flameproof Fusible Wire Wound Resistor for Circuit Protection
Small Type Fusible Resistors 0.22k ~ 100K Flameproof Resistors For Overload
Product Specification
| Resistance Accuracy | ±5% ( J ) | Supply Ability | Depending on the specific circumstances, it generally takes 5-7 work days to complete |
| Dimensions | Please check the attachment | Fusing Characteristics | 25 times of rated wattage (Fusing time is within 60 seconds) |
| Nonflammability | 16 times of rated wattage for 5 min ( not flamed ) | Payment Terms | T/T |
| Delivery Time | 7-10 work days | Packaging Details | T/B |
| Moisture-proof Load Life | Rated power load 90 minutes ON 30 minutes OFF 40°C 95% RH 1000 hours ( ΔR/R≤±5% ) | Resistance Range(Ω) | 1~20Ω |
| Brand Name | TYOHM | Model Number | FKN-H |
| Certification | Place of Origin | China | |
| High Light | fusible wire wound resistors ,fusible resistors over current protection ,wire wound resistors overcurrent protection | ||
The FKN-H series is a fusible power wirewound resistor designed for circuits requiring over current protection and controlled fusing under abnormal current conditions. Its flameproof construction uses a noncombustible insulating coating with solvent-proof and high-temperature-resistant characteristics, making it suitable for electronic circuits where fusing behavior and insulation performance are important design considerations.
The FKN-H combines wirewound resistor construction with a fusible protection function. The series features anti-surge characteristics according to IEC 61000-4-5 and is specifically suitable for half short-circuit applications in chargers. Its specified fusing time is within 60 seconds, while temperature-cycle testing covers -55°C to +200°C.
![]()
| Parameter | Specification |
|---|---|
| Series | FKN-H |
| Product Type | Fusible Wire Wound Resistor |
| Reference Standard | JIS C 5201-1 |
| Anti-Surge Reference | IEC 61000-4-5 |
| Rated Wattage Example | 1W |
| Resistance Range | 1–20Ω |
| Resistance Tolerance | ±5% |
| Temperature Coefficient | <4500 ppm/°C |
| Fusing Time | ≤60 seconds |
| Insulation Resistance | ≥1,000 MΩ |
| Dielectric Withstanding Voltage | AC 350V / 1 minute |
| Temperature Cycle | -55°C to +200°C, 5 cycles |
| Coating | Noncombustible insulating coating |
| Coating Characteristics | Solvent proof and resistant to high temperature |
| 1W Dimension Example | D 3.5 Max. × L 9 × H 28 mm, d 0.65 mm |
Charger Protection
The FKN-H can be applied to the over current protection section of charger circuits, particularly in half short-circuit applications identified for this series. In this configuration, the fusible wirewound resistor provides resistance during normal circuit operation and a fusing function under specified abnormal-current conditions.
Power Supply Protection Circuits
FKN-H fusible resistors can be used in power supply circuits where current limiting and controlled fusing are required. The noncombustible insulating coating and specified insulation resistance provide defined technical parameters for circuit design and component selection.
Surge-Related Protection Circuits
With anti-surge characteristics according to IEC 61000-4-5, FKN-H can be considered for electronic power and protection circuits where surge conditions are part of the design requirements. Resistance value, rated wattage and actual operating conditions should be considered during component selection.
Electronic Equipment Requiring Fusible Protection
FKN-H is suitable for electronic equipment that requires both resistor functionality and over current protection in one component. Its specified resistance range, tolerance, fusing time and temperature-cycle conditions provide practical parameters for engineering selection.
Overcurrent protected fusible wire-wound resistors are high-reliability resistors that combine current limiting, surge protection, and fuse protection.
This series is specifically designed for power supplies, chargers, and other circuit systems requiring overcurrent protection. When the current exceeds a safe threshold, the resistor automatically melts, effectively preventing damage to the power module or motherboard.
The products comply with the IEC 61000-4-5 surge protection standard and can withstand high-energy transient impacts, making them particularly suitable for charger soft short-circuit protection and current overload control systems.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
1992
Total Annual:
$50M-$54M
Employee Number:
700~720
Ecer Certification:
Verified Supplier
Founded in 1992, Asia Akita has grown into a trusted resistor manufacturer serving customers across the electronics, industrial, energy, and automotive sectors. Through continuous investment in quality, environmental management, and product innovation, the company has established a strong reputati... Founded in 1992, Asia Akita has grown into a trusted resistor manufacturer serving customers across the electronics, industrial, energy, and automotive sectors. Through continuous investment in quality, environmental management, and product innovation, the company has established a strong reputati...
Get in touch with us
Leave a Message, we will call you back quickly!