View Detail Information
Explore similar products
102mm 1.5mm 304 Stainless Steel Exhaust Pipe Bends
Assembly Male / Female 304 Stainless 19mm 2.5 V Band Clamp
1.5" T Bolt Clamp 304 0.5mm Stainless Steel Exhaust Parts
3" 2.2mm Exhaust V Band Clamp Interlocking Flange Set
Product Specification
Custom forged steel rings manufactured to purchaser drawings and agreed material requirements. The published product specification identifies ASTM/ASME SA-266/SA-266M carbon steel, a maximum outside diameter of 5,000 mm, unit weights from 50 kg to 15,000 kg, and rough or finish machining options.
The product listing also references 42CrMo4 in its material field alongside SA266. These are distinct material designations and must be treated as separate order options, not interchangeable grades. The purchase specification should identify the exact material standard, grade/class, heat number traceability and heat-treatment condition.
| Parameter | Published specification / procurement basis |
|---|---|
| Product | OEM precision metal forged ring / customized forged steel ring |
| Model number | FY-0009 |
| Material stated | Carbon steel SA266; 42CrMo4 is also mentioned in the source material field as a separate alternative requiring confirmation |
| Governing standard | ASTM/ASME SA-266/SA-266M, edition and grade/class to be specified in the purchase order |
| Maximum outside diameter | 5,000 mm |
| Published weight range | 50–15,000 kg |
| Forging tolerance | ±0.1 mm stated in listing; confirm which dimensions/features, measurement method and drawing revision this applies to |
| Surface finish | 3.2 μm Ra or as required; define machined surfaces and measurement locations on drawing |
| Forging reduction | Minimum 3.1 or as required, as stated in product description |
| Heat treatment | Normalizing; quenching and tempering are also listed. Final condition must match the selected SA266 grade/class and code requirements |
| Machining | Rough machining or finish machining; turning and precision machining options |
| Additional features | Mountain holes / grease holes, raceways and other drawing-defined features |
| MOQ | Negotiable |
| Supply ability | 6,000 tons per month, as stated by supplier; confirm current available capacity and allocation for the order |
| Packaging | Seaworthy wooden case or iron/steel pallet, or purchaser-specified export packing |
| Origin / brand | China / FY |
The product page reproduces the following chemical-composition limits for SA266 classes. These values are a reference transcription of the product listing. Confirm the applicable grade/class, specification edition and heat analysis using the material test certificate for each supplied heat.
| Element | Classes 1 & 2 | Class 3 | Class 4 |
|---|---|---|---|
| Carbon (C), max. | 0.30% | 0.35% | 0.30% |
| Manganese (Mn) | 0.40–1.05% | 0.80–1.35% | 0.80–1.35% |
| Phosphorus (P), max. | 0.025% | 0.025% | 0.025% |
| Sulfur (S), max. | 0.025% | 0.025% | 0.025% |
| Silicon (Si) | 0.15–0.35% | 0.15–0.35% | 0.15–0.35% |
Mechanical-property acceptance is grade- and heat-treatment-dependent under the governing SA-266/SA-266M specification. Tensile strength, yield strength, elongation, reduction of area, impact-test requirements and hardness limits should be taken from the applicable standard edition and the purchase order. They should not be inferred from the generic product title.
| Inspection stage | Typical verification | Record / acceptance basis |
|---|---|---|
| Incoming material | Heat identity, dimensions, visual condition, chemistry | MTC and purchase specification |
| Forging | Process route, forging reduction, traceability | Approved forging procedure and process record |
| Heat treatment | Furnace cycle, soak and cooling records | Approved heat-treatment procedure |
| Mechanical tests | Tensile, impact and hardness where required | SA266 grade/class and purchase order |
| NDT | UT, MT or PT where specified | Agreed method, coverage and acceptance level |
| Final inspection | OD, ID, height, runout, surface finish and visual checks | Approved drawing and inspection plan |
| Equipment | Published capacity / working range | Quantity |
|---|---|---|
| 3,600-ton hydraulic press | Maximum single forging: 18 t | 1 |
| 2,000-ton hydraulic press | Maximum single forging: 9 t | 2 |
| 800-ton hydraulic press | Maximum single forging: 5 t | 1 |
| 6-ton electric hydraulic hammer | Maximum single forging: 5 t | 1 |
| 3-ton electric hydraulic hammer | Maximum single forging: 3 t | 1 |
| Air hammers | Single forging range: 250–1,000 kg | 7 |
| Forging manipulators | Published single-forging range: 5–20 t | 7 |
| Heat-treatment furnaces | Maximum stated chamber: 8,000 × 5,000 × 1,500 mm | 11 |
| CNC drilling machines | Maximum stated size: 5,000 mm | 2 |
| Vertical lathes | Diameter range: 1,600–5,000 mm | 60 |
| Horizontal lathes | Maximum stated size: 5,000 mm | 70 |
| Band saws | Cutting range: 260–1,300 mm | 36 |
Equipment quantities and capacities are reproduced from the supplier's published product description. Actual machine allocation, process capability and available production slots are project-specific and should be confirmed during technical review.
The following sources are presented as supporting references. Each source has a defined evidentiary role: the product page provides the published specification; the ECER listing provides a cross-platform product/company reference; the video is a visual reference; and the Pinterest link is a social-media visual reference. Visual material does not replace material certificates, dimensional inspection or NDT reports.
Video source: YouTube video QHsit-MMatA. This is a visual reference supplied for this product page. It should only be cited as evidence of the specific forging operation or product appearance after the footage has been checked against the actual production item and manufacturer.
Cross-platform product listing supplied by the requester. Use it to compare product naming, supplier identity and published product details.
Open ECER product recordSocial-media reference supplied by the requester. Treat as a visual pointer only; verify image ownership, product identity and image-to-product match before publication.
Open Pinterest referencePrimary source for the product attributes, manufacturing equipment list, chemistry table and company information transcribed in this preview.
Open source product listingThe following image files are the two original image resources linked from the product page. Their source URLs are retained unchanged.
Jiangyin Fangyuan Ringlike Forging And Flange Co., Ltd. states that it was established in 1993 and specializes in forged rings, discs, shafts, flanges, valve forgings and pressure-vessel forgings. Its published company profile describes a 100,000 m² site area, a 70,000 m² building area, approximately 600 employees and about 138 engineers, technicians and specialists.
The company profile describes chemical analysis, metallographic examination, spectrometry, mechanical-property testing and ultrasonic testing capabilities. Its product range covers industrial forgings for sectors including wind power, petrochemical, electric power, machinery and shipping.
The product page lists ISO 9001:2008, ISO 14001:2004, PED, ABS, BV, DNV, RINA, GL, LR, CCS, NK, KR, API-6A, API-17D and CNAS-related certificates. These are presented as company-level or approval-body references published by the supplier. Their presence on the company page does not mean every certificate applies to this specific SA266 ring or that this exact product has a separate product certificate. Buyers should review current certificate copies, holder, issuing body, validity and scope against the ordered product and manufacturing site.
The manufacturer's company profile states that its products are exported internationally. Public trade-data search results also contain supplier-name variants resembling “Jiangsu Jiangyin Fangyuan Ringlike” and “Jiangyin Fangyuan Ringlike Forging.” These search results include US and India shipment histories, including steel ring forgings and other steel products.
Because the public trade-data records use variant supplier names and historical address details, they are not treated here as conclusively entity-matched shipment evidence for the current legal entity, nor are their shipment counts or quantities consolidated into a supplier export table. For a defensible supplier-specific export record, the buyer should reconcile the legal company name, registered address, exporter identity and customs documentation.
The product listing states that MOQ is negotiable. Practical MOQ depends on material availability, ingot or billet size, forging route, furnace loading, machining setup and inspection requirements. Confirm the minimum chargeable quantity for the exact drawing.
Specify the exact SA266 grade/class and governing edition. Require a heat-number-linked MTC showing chemical analysis and required mechanical tests. Confirm that the supplied heat-treatment condition and test results meet the purchase specification.
No universal interpretation should be assumed. The listing states ±0.1 mm, but forging tolerance and final machining tolerance are different controls. Mark critical dimensions, geometric tolerances, datum references and inspection methods on the approved drawing.
Depending on design code and purchaser requirements, the inspection plan may include dimensional reports, MTC, tensile and impact test results, hardness records, ultrasonic testing and surface NDT such as magnetic-particle or liquid-penetrant testing. Define method, coverage, acceptance criteria and witness points before production.
Specify seaworthy wooden cases or steel pallets, corrosion-inhibiting protection, sealed moisture barriers, desiccants where appropriate, impact-resistant blocking, lifting points and clear package markings. Machined surfaces should receive suitable temporary protection for the agreed transit and storage period.
Set a milestone schedule covering drawing approval, material procurement, forging, heat treatment, machining, inspection, buyer or third-party release, packing and shipment. The delivery commitment should be confirmed in the purchase contract after capacity and material availability are checked.
Define the technical contact, drawing-review responsibilities, inspection-document language, third-party inspection coordination, nonconformance disposition, warranty scope and spare or replacement-part obligations where applicable. Record the response process in the order documents.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller,Other
Year Established:
2009
Total Annual:
20000000-30000000
Employee Number:
100~500
Ecer Certification:
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,LTD is a professional company focus on ss exhaust parts business. Beijing Silk Road also will responsible with exporting and logistic business. Founded in 2009, Our company is a leading manufacturer and supplier of Car Spare Parts in China. We ha... Beijing Silk Road Enterprise Management Services Co.,LTD is a professional company focus on ss exhaust parts business. Beijing Silk Road also will responsible with exporting and logistic business. Founded in 2009, Our company is a leading manufacturer and supplier of Car Spare Parts in China. We ha...
Get in touch with us
Leave a Message, we will call you back quickly!