Anping Qianpu Wire Mesh Products Co., Ltd.
| Payment Terms | T/T, Western Union, L/C |
| Delivery Time | a week |
| Packaging Details | Warpped with plastic film, then in wooden case or pallets. |
| Product Name | Aluminum Perforated Mesh |
| Material | Aluminum |
| Hole Shape | Round, slot, square, hexagnoal, etc |
| Punched | Perforated |
| Thickness | 0.5mm to 8.0mm |
| Hole Pattern | 90°, 45°, 60° |
| Width | 1m, 1.22m, 1.5m to 4m |
| Length | 15m, 30m to 60m |
| Features | has good corrosion resistance and malleability. |
| Application | Decoration, Cladding, Ceiling, Guardrail, Acoustic panel, etc |
| Brand Name | QIANPU |
| Certification | ISO |
| Place of Origin | Anping of China |
View Detail Information
Explore similar products
Caron Steel 3mm To 30mm Squaresquare Perforated Metal
Slot Hole 0.1mm To 8mm Perforated Metal Mesh For Liquids And Solids Filtration
SS304 Perforated Stainless Steel Screen 0.5mm To 10mm Round Hole
Triangle Hole 3mm To 10mm Perforated Metal Mesh For Noise Reduction
Product Specification
| Payment Terms | T/T, Western Union, L/C | Delivery Time | a week |
| Packaging Details | Warpped with plastic film, then in wooden case or pallets. | Product Name | Aluminum Perforated Mesh |
| Material | Aluminum | Hole Shape | Round, slot, square, hexagnoal, etc |
| Punched | Perforated | Thickness | 0.5mm to 8.0mm |
| Hole Pattern | 90°, 45°, 60° | Width | 1m, 1.22m, 1.5m to 4m |
| Length | 15m, 30m to 60m | Features | has good corrosion resistance and malleability. |
| Application | Decoration, Cladding, Ceiling, Guardrail, Acoustic panel, etc | Brand Name | QIANPU |
| Certification | ISO | Place of Origin | Anping of China |
| High Light | 8.0mm thick aluminum perforated mesh ，high strength decoration aluminum perforated mesh ，8.0mm thick perforated metal mesh | ||
Aluminum panel has good reflex for visible light and heat. And aluminum perforated screen has good corrosion resistance and malleability. It is the ideal low-temperature-resistant material. Anodizing can improve the corrosion resistance and form a beautiful appearance.
1100 – It is commercially pure aluminum with a content of 99.0%. Its strength is relatively low, but has excellent ductility, formability, weldability and corrosion resistance. Anodizing, can further improve the corrosion resistance while obtain an aesthetic surface.
3003 – It is an alloy of aluminum and manganese. 3003 is the most widely used anti-rust aluminum. It has good corrosion resistance (close to 1100) to atmospheric, fresh water, sea water, food, organic acid, gasoline, neutral inorganic salt solution, dilute acid etc.
5005 – Similar to 3003. It has medium strength and good corrosion resistance, and its anodized film is brighter than 3003.
5052 – Belongs to the Al-Mg alloy and has a wide range of applications. Especially in the construction industry, it is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength.
2024 – Belongs to the Al-Cu-Mg alloy. High-strength hard aluminum, which is twice hard than 5052. It can be strengthened by heat treatment but not very corrosion resistant, so it is often anodized and painted or coated with aluminum to improve its corrosion resistance.
6061 – Belongs to the Al-Mg-Si alloy. It has many features: Excellent processing properties, good corrosion resistance, high toughness, no deformation after processing, easy color film, excellent oxidation effect, etc.
7075 – It is a cold-treated forging alloy with high strength and hardness, far better than mild steel. 7075 is one of the most powerful alloys in the industry, with common corrosion resistance, good mechanical properties and excellent anodic reaction, therefore, it is a typical aluminum alloy for aerospace military industry.
| Chemical Component of Aluminum (%) | ||||||||||
| Grade | Al min. | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others |
| 1100 | 99 | 0.95 Si + Fe | 0.05–0.02 | 0.05 | – | – | 0.1 | – | 0.15 | |
| 2024 | Rem. | 0.5 | 0.5 | 3.8–4.9 | 0.30–0.90 | 1.2–1.8 | 0.1 | 0.25 | 0.15 | 0.15 |
| 3003 | Rem. | 0.6 | 0.7 | 0.05–0.20 | 1.0–1.5 | – | – | 0.1 | – | 0.15 |
| 5005 | Rem. | 0.3 | 0.7 | 0.2 | 0.2 | 0.5–1.1 | 0.1 | 0.25 | – | 0.15 |
| 5052 | Rem. | 0.25 | 0.4 | 0.1 | 0.1 | 2.2–2.8 | 0.15–0.35 | 0.1 | – | 0.15 |
| 6061 | Rem. | 0.40–0.80 | 0.7 | 0.15–0.40 | 0.15 | 0.8–1.2 | 0.04–0.35 | 0.25 | 0.15 | 0.15 |
| 7075 | Rem. | 0.4 | 0.5 | 1.2–2.0 | 0.3 | 2.1–2.9 | 0.18–0.28 | 5.1–6.1 | 0.2 | 0.15 |
| Note: Rem.=Remainder | ||||||||||
| Mechanical Property | |||||
| Grade | Temper | Tensile Strength (MPa) | Yield Stress (MPa) | Elongation at Break (%) | |
| 0.25–1.25 mm | 1.26–3.0 mm | ||||
| 1100 | – | 89.6 | 34.5 | 30 | 6 |
| H12 | 110.3 | 103.4 | 4 | 12 | |
| H14 | 124.1 | 117.2 | 3 | 10 | |
| H16 | 144.8 | 137.9 | 2 | 8 | |
| H18 | 165.5 | 151.7 | 2 | 6 | |
| 2024 | – | 186.2 | 75.8 | 18 | 20 |
| T3 | 482.6 | 344.7 | 16 | 18 | |
| T4 | 468.8 | 324.1 | 20 | 19 | |
| 3003 | – | 110.3 | 41.4 | 30 | 33 |
| H12 | 131 | 124.1 | 9 | 11 | |
| H14 | 151.7 | 144.8 | 3 | 7 | |
| H16 | 179.3 | 172.4 | 3 | 5 | |
| H18 | 199.9 | 186.2 | 3 | 5 | |
| 5005 | – | 124.1 | 41.4 | 22 | 25 |
| H12 | 137.9 | 41.4 | 22 | 25 | |
| H14 | 158.6 | 131 | 5 | 9 | |
| H16 | 179.3 | 172.4 | 3 | 5 | |
| H18 | 199.9 | 193.1 | 2 | 2 | |
| H32 | 137.9 | 117.2 | 8 | 9 | |
| H34 | 158.6 | 137.9 | 6 | 8 | |
| H36 | 179.3 | 165.5 | 5 | 6 | |
| H38 | 199.9 | 786.2 | 3 | 4 | |
| 5052 | – | 193.1 | 89.6 | 20 | 21 |
| H32 | 227.5 | 193.1 | 7 | 10 | |
| H34 | 262 | 213.7 | 6 | 8 | |
| H36 | 275.8 | 241.3 | 4 | 5 | |
| H38 | 289.6 | 255.1 | 3 | 4 | |
| 6061 | – | 124.1 | 55.2 | 25 | 26 |
| T4 | 241.3 | 144.8 | 22 | 24 | |
| T6 | 310.3 | 275.8 | 12 | 17 | |
| 7075 | – | 127.5 | 103.4 | 16 | 18 |
| T6 | 572.3 | 503.3 | 11 | 12 | |
Parts of Specifications:
| Hole Diameter | Staggered Centers | Sheet Thickness | Open Area | ||
| 0.045" | 1.14mm | 0.66" | 0.033-0.039" | 0.84-0.99mm | 37% |
| 1/16" | 1.59mm | 3/32" | 0.027-0.033" | 0.68-0.84mm | 41% |
| 1/16" | 1.59mm | 1/8" | 0.027-0.066" | 0.68-1.68mm | 23% |
| 5/64" | 1.98mm | 1/8" | 0.027-0.053" | 0.68-1.35mm | 35% |
| 0.081" | 2.06mm | 1/8" | 0.053-0.066" | 1.35-1.68mm | 38% |
| 3/32" | 2.38mm | 5/32" | 0.053*0.066" | 1.35-1.68mm | 33% |
| 1/8" | 3.17mm | 3/16" | 0.027-0.127" | 0.68-3.23mm | 40% |
| 5/32" | 3.97mm | 3/16" | 0.027-0.056" | 0.68-1.68mm | 63% |
| 3/16" | 4.76mm | 1/4" | 0.027-0.127" | 0.68-3.23mm | 50% |
| 1/4" | 6.35mm | 3/8" | 0.033-0.011",0.25" | 0.84-2.82mm,6.35mm | 40% |
| 3/8" | 9.52mm | 1/2" | 0.053-0.082",3/16" | 1.35-2.08mm,4.76mm | 51% |
| 3/8" | 9.52mm | 9/16" | 0.059",0.119" | 1.5mm,3.02mm | 40% |
| 1/2" | 12.7mm | 11/16" | 0.033-0.127",3/16" | 0.84-3.23mm,4.76mm | 48% |
| 1/4" Hex | 6.35mm | 0.285" | 0.027-0.033" | 0.68-0.84mm | 76% |
| 3/8" Sq | 9.52mm | Cane" | 0.053-0.066" | 1.35-1.68mm | 51% |
Other Specifications according to your requirements.
It has good corrosion resistance and malleability. It is the ideal low-temperature-resistant material.
Round; Rectangular hole; Square; Triangle; Diamond; Slotted Hole; Hexagonal; Cross; Slotted; and other patterns according to your drawings or application requirement.
Applications:
Decoration, Cladding, Ceiling, Guardrail, Acoustic panel, etc
Round hole perforated sheet
Square hole perforated sheet
Slot hole perforated sheet
Decorative Perforated Sheet
Embossed sheet
Perforated steel sheet
Perforated stainless steel sheet
Perforated aluminum sheet
perforated copper or brass sheet
Etched plates
Perforated metal noise barrier
Perforated filter form SS, carbon steel, aluminum, or copper sheet
Perforated tube
Perforated sunshade panel
Perforated kinetic facade
Anti-skid stair steps
Hexagonal hole perforated metal
Louver hole perforated metal
Raised Perforated Metal
Nickel perforated metal
Galvanized perforated metal
Carbon steel perforated metal
Perforated metal for filter
Perforated Metal for facade
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2005
Total Annual:
5 000 000-10 000 000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Anping Qianpu Wire Mesh Products Co., Ltd. is a metal mesh manufacturing company headquartered in China. Focuses on the production of various metal mesh products, including stainless steel mesh, copper mesh, nickel mesh, iron wire mesh, etc. The company has advanced production equipment and techni... Anping Qianpu Wire Mesh Products Co., Ltd. is a metal mesh manufacturing company headquartered in China. Focuses on the production of various metal mesh products, including stainless steel mesh, copper mesh, nickel mesh, iron wire mesh, etc. The company has advanced production equipment and techni...
Get in touch with us
Leave a Message, we will call you back quickly!