Shanghai Bozhong Metal Group Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 1000TON/MONTH |
| Delivery Time | 3--10days |
| Packaging Details | seaworthy packing or as required |
| Dimension | Accept custom |
| Description | Stainless Steel Sheet |
| Standard | AISI, ASTM, DIN, EN, GB ,JIS |
| Grade | 1.2343 / DIN X38CrMoV5-1 / AISI H11 |
| MOQ | Different |
| Brand Name | Bozhong |
| Model Number | 1.2343 / DIN X38CrMoV5-1 / AISI H11 |
| Certification | ISO / TUV / DNV |
| Place of Origin | China |
View Detail Information
Explore similar products
Supplying High quality Mat.No. 1.1191, DIN Ck45, AISI 1045 Steel Plates/4Cr13
special steel round bar 1.2738 1.2311 1.0503 1.0540 1.0535 1.1525 1.1545 1.2735
1.2312 Durable Steel Plate Coil High Tensile Strength Good Corrosion Resistant
High Tensile Strength ABREX 400 Plate , Abrasion Resistant Sheet Good Reliabilit
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 1000TON/MONTH |
| Delivery Time | 3--10days | Packaging Details | seaworthy packing or as required |
| Dimension | Accept custom | Description | Stainless Steel Sheet |
| Standard | AISI, ASTM, DIN, EN, GB ,JIS | Grade | 1.2343 / DIN X38CrMoV5-1 / AISI H11 |
| MOQ | Different | Brand Name | Bozhong |
| Model Number | 1.2343 / DIN X38CrMoV5-1 / AISI H11 | Certification | ISO / TUV / DNV |
| Place of Origin | China | ||
| High Light | alloy steel sheet ， 400 plate | ||
Designation by Standards
Mat. No. DIN EN AISI 1.2343 X38CrMoV5-1 X27CrMoV51 H11 Chemical Composition (in weight %)
C Si Mn Cr Mo Ni V W Others 0.37 1.0 0.38 5.15 1.30 - 0.40 - - Description
H11 is one of the Hot Work, Chromium type tool steels. It is relatively low in carbon content and has good toughness and deep hardens by air quench from heat treatment. Good combination of toughness, hardness and wear resistance in hot. Resistance to softening and to cracking.Applications
H11 is often used for highly stressed structural parts such as aircraft landing gear. It resists softening at temperatures up to 537oC while retaining good ductility and toughness even at strength levels on the order of 275 ksi. Tools for hot forging of light metal. Pressure die casting tools. Dies, mandrels, punchers, knives, moulds. This grade can be water cooled. For most highest requirements we recommended UTOPMO1 EFS.Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 215, 176 (at 500oC), 165 (at 600oC)
Density [g/cm3]: 7.80, 7.64 (at 500oC), 7.60 (at 600oC)
Thermal conductivity [W/m.K]: 25, 28.5 (at 500oC), 29.3 (at 600oC)
Electric resistivity [Ohm mm2/m]: 0.52, 0.86 (at 500oC), 0.96 (at 600oC)
Specific heat capacity[J/g.K]: 0.46, 0.55 (at 500oC), 0.59 (at 600oC)Coefficient of Linear Thermal Expansion 10-6 oC-1
20-100oC 20-200oC 20-300oC 20-400oC 20-500oC 20-600oC 20-700oC 20-700oC 9.8 12.5 13.0 13.2 13.5 13.7 13.8 14.0 Continuous Cooling Transformation (CCT) Diagram
Click the image to enlarge the diagram.Soft Annealing
Heat to 800-840oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 229.Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.Hardening
Harden from a temperature of 1000-1040oC followed by air, oil quenching or warm bath quenching 500-550oC. Hardness after quenching is 50-56 HRC.Tempering
Tempering temperature: See the data bellow.Tempering Temperature (oC) vs. Hardness (HRC)
100oC 200oC 300oC 400oC 500oC 550oC 600oC 650oC 700oC 53 52 52 52 54 52 48 38 30 1845 1790 1790 1790 1910 1790 1570 1200 970 Tempering Diagram
Click the image to enlarge the diagram.Diagram Tempering Temperature – Mechanical Properties
Click the image to enlarge the diagram.Diagram Tempering Temperature – Mechanical Properties
Click the image to enlarge the diagram.Forging
Hot forming temperature: 1100-900oC.Cold Working
Cold working may readily be accomplished on H11 by conventional methods.Machinability
Machinability is reasonably good, approximately 75% that of the W group water hardening low alloy tool steels.Corrosion Resistance
This is a steel alloy and not corrosion resistant. It will rust unless protected.Welding
H11 is a readily weldable alloy by conventional methods.Forms manufactured: Please see the Dimensional Sales Program.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Seller
Year Established:
1998
Total Annual:
45000000-50000000
Employee Number:
120~150
Ecer Certification：
Active Member
We have six subsidiaries located in Shanghai, Zhejiang, Jiangsu and Hongkong, which have built great relationship with the metal facilities abroad and at home, so as to provide excellent services for our clients. We have own entire system for pre-sale, in-sale and after-sale process. And our b... We have six subsidiaries located in Shanghai, Zhejiang, Jiangsu and Hongkong, which have built great relationship with the metal facilities abroad and at home, so as to provide excellent services for our clients. We have own entire system for pre-sale, in-sale and after-sale process. And our b...
Get in touch with us
Leave a Message, we will call you back quickly!