JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Outer Diameter | 6-1200mm |
| Wall Thickness | 1-120mm |
| Length | 6m,5.8m,11.8m,12m, or as required |
| Surface Treatment | black painted,PE coated,galvanized |
| Tensile Strength | 415-735MPa |
| Yield Strength | 205-440MPa |
| Elongation | 18-30% |
| Hardness | ≤250HB |
| Carbon Content | 0.05-0.20% |
| Manganese Content | 0.30-0.61% |
| Chromium Content | 0.50-10.00% |
| Molybdenum Content | 0.44-1.50% |
| Silicon Content | 0.10-2.00% |
| Heat Treatment Temp | 1200°F-1375°F |
| OD Tolerance | ±0.4mm to ±1% |
View Detail Information
Explore similar products
Galvanized Steel Pipe Tube DN10 - DN200 With SCH40S ASTM GGB DIN Standard For
Galvaized Steel Pipe & Tube GI Pipe 1inch 2Inch 3Inch 4Inch Galvanized Pipe /
Hot Dipped Galvanized Round Steel Pipe Pi Pipe Pre Galvanized Steel Pipe
Hot Dip Galvanized Round Steel Pipe / GI Pipe Pre Galvanized Steel Pipe
Product Specification
| Outer Diameter | 6-1200mm | Wall Thickness | 1-120mm |
| Length | 6m,5.8m,11.8m,12m, or as required | Surface Treatment | black painted,PE coated,galvanized |
| Tensile Strength | 415-735MPa | Yield Strength | 205-440MPa |
| Elongation | 18-30% | Hardness | ≤250HB |
| Carbon Content | 0.05-0.20% | Manganese Content | 0.30-0.61% |
| Chromium Content | 0.50-10.00% | Molybdenum Content | 0.44-1.50% |
| Silicon Content | 0.10-2.00% | Heat Treatment Temp | 1200°F-1375°F |
| OD Tolerance | ±0.4mm to ±1% | ||
| High Light | High Temperature Resistant Seamless Steel Pipe ，Corrosion Resistant Alloy Steel Pipe ，Customized Size Boiler Pipe | ||
Professional manufacturer of high-quality seamless alloy steel pipes including grades P11, T11, T91, T22, P22, P5, P9, and WB36 with customized sizing options.
| Grade | C | Mn | P≤ | S≤ | Si | Cr | Mo | V≥ |
|---|---|---|---|---|---|---|---|---|
| T11 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.50-1.00 | 0.50-1.00 | 1.00-1.50 | |
| T12 | 0.05-0.15 | 0.30-0.61 | 0.025 | 0.025 | ≤0.50 | 0.80-1.25 | 0.44-0.65 | |
| T13 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | ≤0.50 | 1.90-2.60 | 0.87-1.13 | |
| T2 | 0.10-0.20 | 0.30-0.61 | 0.025 | 0.025 | 0.10-0.30 | 0.50-0.81 | 0.44-0.65 | |
| T5 | ≤0.15 | 0.30-0.60 | 0.025 | 0.025 | ≤0.50 | 4.00-6.00 | 0.45-0.65 | |
| T5b | ≤0.15 | 0.30-0.60 | 0.025 | 0.025 | 1.00-2.00 | 4.00-6.00 | 0.45-0.65 | |
| T5c | ≤0.12 | 0.30-0.60 | 0.025 | 0.025 | ≤0.50 | 4.00-6.00 | 0.45-0.65 | |
| T9 | ≤0.15 | 0.30-0.60 | 0.025 | 0.025 | 0.25-1.00 | 8.00-10.00 | 0.9-1.0 | |
| T22 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | ≤0.50 | 1.90-2.60 | 0.87-1.13 | |
| T91 | 0.08-0.12 | 0.30-0.60 | 0.020 | 0.010 | ≤0.50 | 8-9.50 | 0.85-1.05 | 0.18-0.25 |
| T92 | 0.07-0.13 | 0.30-0.60 | 0.020 | 0.010 | ≤0.50 | 8-9.50 | 0.3-0.60 | 0.15-0.25 |
| T21 | 0.05-0.15 | 0.30-0.60 | 0.025 | 0.025 | ≤0.50 | 2.65-3.35 | 0.80-1.06 |
| Standard | Steel Grade | Tensile (MPa) | Yield (MPa) | Elongate (%) | Hardness |
|---|---|---|---|---|---|
| 20MnG | 20MnG | ≥415 | ≥240 | ≥22 | |
| 25MnG | 25MnG | ≥485 | ≥275 | ≥20 | |
| 15CrMoG | 15CrMoG | 440~640 | ≥235 | ≥21 | |
| 12Cr2MoG | 12Cr2MoG | 450~600 | ≥280 | ≥20 | |
| 12Cr1MoVG | 12Cr1MoVG | 470~640 | ≥255 | ≥21 | |
| 12Cr2MoWVTiB | 12Cr2MoWVTiB | 540~735 | ≥345 | ≥18 | |
| 10Cr9Mo1VNb | 10Cr9Mo1VNb | ≥585 | ≥415 | ≥20 | |
| ASME SA210 | SA210A-1 | ≥415 | ≥255 | ≥30 | ≤143HB |
| ASME SA210 | SA210C | ≥485 | ≥275 | ≥30 | ≤179HB |
| ASME SA213 | SA213 T11 | ≥415 | ≥205 | ≥30 | ≤163HB |
| ASME SA213 | SA213 T12 | ≥415 | ≥220 | ≥30 | ≤163HB |
| ASME SA213 | SA213 T22 | ≥415 | ≥205 | ≥30 | ≤163HB |
| ASME SA213 | SA213 T23 | ≥510 | ≥400 | ≥20 | ≤220HB |
| ASME SA213 | SA213 T91 | ≥585 | ≥415 | ≥20 | ≤250HB |
| ASME SA213 | SA213 T92 | ≥620 | ≥440 | ≥20 | ≤250HB |
| DIN17175 | ST45.8/ | 410~530 | ≥255 | ≥21 | / |
| DIN17175 | 15Mo3 | 450~600 | ≥270 | ≥22 | |
| DIN17175 | 13CrMo44 | 440~590 | ≥290 | ≥22 | |
| DIN17175 | 10CrMo910 | 480~630 | ≥280 | ≥20 |
Our facility features a full-automatic natural gas furnace measuring 24 meters in length, maintaining temperature tolerance within 10ºC for precise heat treatment control.
Important Note: It is recommended that tempering temperature should be at least 100°F [50°C] above intended service temperature. Please advise if service temperature exceeds 1100°F [600°C].
Grades P1, P2, and P12 (hot finished or cold drawn) may receive final heat treatment at 1200°F[650°C] to 1300°F [705°C]. All Grade P5c pipes undergo final heat treatment from 1325°F [715°C] to 1375°F[745°C].
| OD (mm) | Plus Tolerance (+) | Minus Tolerance (-) |
|---|---|---|
| 10.29-48.3 | 0.4 | 0.4 |
| <48.3--≤114.3 | 0.79 | 0.79 |
| <114.3-≤219.1 | 1.59 | 0.79 |
| <219.1-≤323.9 | 2.38 | 0.79 |
| <323.9 | ±1% | ±1% |
High pressure, low & medium pressure boiler steel pipes/tubes are ideal for manufacturing super-heaters, re-heaters, water walls, and economizers in large-scale power plants.
Established in 1992, our company specializes in pipe fittings production, steel pipe sales, and export services. We are a professional enterprise focusing on alloy steel pipes, alloy pipes, and alloy pipe fittings.
Our facility features 420 sets of advanced equipment including pushing machines, press machines, large heat treatment furnaces, beveling machines, sawing machines, three-way extruders, splint hammers, large sand blasting machines, and comprehensive testing instruments.
We maintain over 20,000 tons of special steel pipes in inventory year-round, sourcing from major steel producers including Tianjin Big Seamless Steel Tube, Shanghai Baosteel, Chengdu Steel Vanadium, Yangzhou Chengde, Valing Henggang, and Baotou Steel.
Global Reach: Our products are exported to Southeast Asia, Central Asia, North Africa, South America, and serve industries including petroleum, chemical, electric power, metallurgy, city gas, heat pipe networks, and shipbuilding.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative... Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative...
Get in touch with us
Leave a Message, we will call you back quickly!