JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Diameter range | 3 - 250mm |
| Material composition | 76% Cu, 23% Zn, 0.5% Pb |
| Density | 8.6 g/cm3 |
| Melting point | 888°C (1630°F) |
| Tensile strength | 360 MPa |
| Yield strength | 170 MPa |
| Elastic modulus | 101 GPa |
| Elongation | 42% in 50 mm |
| Poisson's ratio | 0.34 |
| Brinell hardness | 82 HB |
| Electrical conductivity | Good |
| Thermal conductivity | Good |
| Shape options | Square, Rectangular, Round |
| Length range | 500-6000mm |
| Surface finish | Mill, polished, bright, oiled |
View Detail Information
Explore similar products
Hot Rolled C12000 Alloy Copper Round Bar with Diameter 10-300mm SF-CU Copper Rod
HPb59-1 Cuzn40Pb1 C67820 6mm Diameter Brass Round Bar ASTM Standard Copper Alloy
ASTM Standard C1100 Grade Copper Round Bar with 3-320mm Diameter Brass Round Bar
ASTM B152 C1100 Alloy Red Copper Round Bar with 6-300mm Diameter for Industrial
Product Specification
| Diameter range | 3 - 250mm | Material composition | 76% Cu, 23% Zn, 0.5% Pb |
| Density | 8.6 g/cm3 | Melting point | 888°C (1630°F) |
| Tensile strength | 360 MPa | Yield strength | 170 MPa |
| Elastic modulus | 101 GPa | Elongation | 42% in 50 mm |
| Poisson's ratio | 0.34 | Brinell hardness | 82 HB |
| Electrical conductivity | Good | Thermal conductivity | Good |
| Shape options | Square, Rectangular, Round | Length range | 500-6000mm |
| Surface finish | Mill, polished, bright, oiled | ||
| High Light | C24000 Alloy Brass Bar ，4-250mm Diameter Brass Rod ，ASTM Standard Alloy Brass Bar | ||
Diameter Range: 3 - 250mm
| Product Type | Brass Bar, Brass Rod, Brass Shaft, Brass Stick |
| Standards | ASTM, AISI, EN, BS, JIS, GB/T, BSI, AS/NZS, ISO, etc. |
| Material Grades | H96, H90, H85, H80, H70, H68, H65, H63, H62, H60, C21000, C22000, C23000, C24000, C26000, C26800, C27000, C27200, C28000, C35000, etc. Or as required. |
| Surface Finish | Mill, polished, bright, oiled, or as required |
| Density | 8.5 g/cm³ |
| Available Diameters | 1-200mm |
| Hardness Options | 1/16 hard, 1/8 hard, 3/8 hard, 1/4 hard, 1/2 hard, full hard, soft, etc. |
| Shapes | Square, Rectangular, Round |
| Length | 500-6000mm, or as required |
C24000 brass, also known as Low Leaded Brass, contains 80% copper (Cu) and 20% zinc (Zn). The lead content in this alloy enhances machinability, formability, and corrosion resistance. Note that lead is a toxic substance requiring proper safety measures during handling and processing.
| Element | Content (%) |
|---|---|
| Cu | 80 |
| Zn | 20 |
C24000 brass features a density of 8.66 g/cm³ and melting points ranging from 966°C to 999°C. This reddish-gold alloy exhibits non-magnetic characteristics with excellent electrical and thermal conductivity, making it ideal for electrical contacts and heat exchangers.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.66 g/cm³ | 0.313 lb/in³ |
| Melting point - liquidus | 999°C | 1830°F |
| Melting point - solidus | 966°C | 1770°F |
C24000 brass offers excellent ductility for easy shaping and forming, with mechanical properties suitable for various industrial applications.
| Properties | Metric | Imperial |
|---|---|---|
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 117 GPa | 17000 ksi |
C24000 brass serves multiple industries including architectural hardware, valve stems, decorative accessories, plumbing fixtures, musical instruments, and ammunition cartridges. The lead content makes it suitable for low-pressure plumbing applications by reducing dezincification risk, while its corrosion resistance benefits marine applications.
C24000 brass has a Brinell hardness of 82 HB. While relatively low compared to other brass alloys, it can be work-hardened through cold deformation to enhance mechanical strength and spring properties.
C24000 brass is not heat-treatable, meaning mechanical properties cannot be significantly altered through heating or cooling. Welding options include brazing, soldering, or gas tungsten arc welding (GTAW), with method selection depending on application requirements and joint types.
C24000 brass demonstrates good corrosion resistance in most environments including freshwater, seawater, and atmospheric conditions. However, susceptibility to dezincification may occur in high-pH or low-oxygen environments if lead content is reduced, making proper alloy selection and maintenance essential for product longevity.
| Package | Standard Sea-worthy package, fixed by belt then loaded into fumigated wooden box |
| Container Sizes |
20Gp - 2.352(width) × 2.385 (Height) × 5.90 (Inside length) Meter 40Gp - 2.352(width) × 2.385 (Height) × 11.8 (Inside length) Meter 40HQ - 2.352(width) × 2.69 (Width) × 5.90 (Inside length) Meter |
| Port of Shipment | Tianjin Xingang port, Qingdao port, Shanghai port, Ningbo port, Guangzhou port, etc. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative... Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative...
Get in touch with us
Leave a Message, we will call you back quickly!