JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Model NO. | 316L |
| Shape | Flat |
| Technique | Cold Rolled |
| Surface Treatment | Bright |
| Cr Content | 16% |
| Ni Content | 10% |
| Mo Content | 2% |
| Thickness Range | 0.1 to 100 mm |
| Width Range | 10-2500mm |
| Length Range | 2m, 2.44m, 3m, or as required |
| Hardness Options | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| UTS | 91 ksi (627 MPa) |
| 0.2% YS | 42 ksi (290 MPa) |
| Elongation | 55% in 2" (50.8 mm) |
| Rockwell Hardness | B79 |
| Certification | ISO, AISI, ASTM |
View Detail Information
Explore similar products
Cold Rolled Polished Surface 441 Stainless Steel Sheet for Automotive Exhaust
Cold Rolled Polished Surface 441 Stainless Steel Sheet for Automotive Exhaust
Cold Rolled 405 Stainless Steel Sheet & Plate with 0.3 - 3.0mm Thickness and
ASTM A240 405 Stainless Steel Sheet - Cold Rolled with Bright Surface and
Product Specification
| Model NO. | 316L | Shape | Flat |
| Technique | Cold Rolled | Surface Treatment | Bright |
| Cr Content | 16% | Ni Content | 10% |
| Mo Content | 2% | Thickness Range | 0.1 to 100 mm |
| Width Range | 10-2500mm | Length Range | 2m, 2.44m, 3m, or as required |
| Hardness Options | Soft, Hard, Half Hard, Quarter Hard, Spring Hard | UTS | 91 ksi (627 MPa) |
| 0.2% YS | 42 ksi (290 MPa) | Elongation | 55% in 2" (50.8 mm) |
| Rockwell Hardness | B79 | Certification | ISO, AISI, ASTM |
| High Light | Cold Rolled Stainless Steel Sheet ，Bright Surface SS 316L Sheet ，Corrosion Resistant 316L Stainless Steel Plate | ||
316/316L Stainless Steel Sheet is a premium grade where superior corrosion resistance is essential. This material is widely used in marine environments, highly acidic conditions, underwater equipment, surgical tools, and food/pharmaceutical applications. The molybdenum addition enhances corrosion resistance compared to the more economical 304 grade.
Available as Sheet, Plate, Coil, Strip, Wire, Pipe, Tube, Bar, Profile, Round, Flat, Square, and Hexagonal forms.
| Product Type | SS 316 Sheet, SS 316 Plate |
|---|---|
| Material Grade | ASTM A240 / ASME SA240 Grade 316 |
| Tolerances | EN 10258 / DIN 59381 |
| Standards | ASTM A480, ASTM A959, ASME IID, EN ISO 9445, EN ISO 18286, EN 10051, EN 10088-1, ISO 15510 |
Cold Rolled Sheet: 0.5-6.4 mm
Hot Rolled Sheet: 3.0-10.0 mm
Thickness: 0.1 to 100 mm
Width: 10-2500 mm (600mm-2030 mm range)
Length: 2m, 2.44m, 3m, or as required (300-6000 mm, Max 18000 mm)
2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN, No.1 finish, 1D, No.4, 8K, satin, hairline, brush, mirror, etching, SB, Ti-coating, color-coating, embossing.
| Element | Type 316 (wt %) | Type 316L (wt %) |
|---|---|---|
| Carbon (C) | 0.08 max. | 0.03 max. |
| Manganese (Mn) | 2.00 max. | 2.00 max. |
| Phosphorus (P) | 0.045 max. | 0.045 max. |
| Sulfur (S) | 0.030 max. | 0.03 max. |
| Silicon (Si) | 0.75 max. | 0.75 max. |
| Chromium (Cr) | 16.00 - 18.00 | 16.00 - 18.00 |
| Nickel (Ni) | 10.00 - 14.00 | 10.00 - 14.00 |
| Molybdenum (Mo) | 2.00 - 3.00 | 2.00 - 3.00 |
| Nitrogen (N) | 0.10 max. | 0.10 max. |
| Iron (Fe) | Balance | Balance |
| UTS ksi (MPa) | 0.2% YS ksi (MPa) | Elongation % in 2" | Rockwell Hardness |
|---|---|---|---|
| 91 (627) | 42 (290) | 55 | B79 |
| Temperature °F (°C) | UTS ksi (MPa) | 0.2% YS ksi (MPa) | Elongation % in 2" |
|---|---|---|---|
| 400 (204) | 81 (558) | 35 (241) | 51 |
| 600 (316) | 78 (538) | 31 (214) | 48 |
| 800 (427) | 76 (524) | 28 (190) | 47 |
| 1000 (538) | 70 (483) | 24 (165) | 44 |
| 1200 (649) | 57 (393) | 21 (145) | 40 |
| 1400 (760) | 35 (241) | 18 (124) | 37 |
| 1600 (871) | 24 (165) | 16 (110) | 44 |
Types 316 and 316L offer improved chloride corrosion resistance compared to Type 304 due to molybdenum content. Suitable for marine atmospheres, paper, petroleum, food, and dairy industries. Resistant to sulfuric acid environments below 5% concentration up to 150°F (60°C). Excellent resistance to acetic, formic, phosphoric, and tartaric acids.
Annealing: Heat to 1900-2100°F (1038-1149°C), then rapidly quench.
Excellent ductility in annealed condition for roll forming, deep drawing, and bending. Work hardens slower than Type 304. Annealing restores ductility for subsequent forming operations.
Austenitic stainless steel weldable by common fusion and resistance techniques. Type 316L eliminates harmful carbide precipitation due to welding. AWS E/ER 316L and 16-8-2 commonly specified as weld filler materials.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative... Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative...
Get in touch with us
Leave a Message, we will call you back quickly!