JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 10Ton per week |
| Delivery Time | 5 - 12 days based on the quantity |
| Packaging Details | standard packing for export |
| Products Name | Stainless Steel Checkered Plate |
| Grade | 254SMO |
| Thickness | 0.6-30.0mm |
| Standard | ASTM EN GB |
| Width | 1000mm 1219mm 1500mm |
| Surface | 2B NO.1 |
| Brand | TISCO BAOSTEEL |
| MOQ | 1 Ton |
| Brand Name | TISCO |
| Model Number | 254SMO |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
201 304 316L Anti Slip Checkered Stainless Steel Sheet
UNS S32205 Stainless Steel Duplex Plate 2205 Thickness 0.4-16.0mm TISCO POSCO
316L 1.4404 Stainless Steel Plate 3.0-16.0mm Width 1500mm TISCO POSCO
EN 10204-3.1 316L Stainless Plate 1.4404 Hot Rolled 3.0-16.0mm
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 10Ton per week |
| Delivery Time | 5 - 12 days based on the quantity | Packaging Details | standard packing for export |
| Products Name | Stainless Steel Checkered Plate | Grade | 254SMO |
| Thickness | 0.6-30.0mm | Standard | ASTM EN GB |
| Width | 1000mm 1219mm 1500mm | Surface | 2B NO.1 |
| Brand | TISCO BAOSTEEL | MOQ | 1 Ton |
| Brand Name | TISCO | Model Number | 254SMO |
| Certification | ISO | Place of Origin | China |
| High Light | EN 2.4660 Stainless Steel Plate ，5ft*20ft Stainless Steel Plate ，4ft*8ft Stainless Steel Plate | ||
EN 2.4660 Stainless Steel Plate Alloy UNS S31254 Stainless Steel Sheet 4ft*8ft 5ft*20ft
| Item | 254SMO Stainless Steel Plate |
| Raw Material | Stainless steel sheet (hot rolled and cold rolled) |
| Grades | 201, 202, 301, 304, 304L, 310S, 309S, 316, 316L, 321, 409L, 410, 410S, 420, 430, 904L, 2205 ,2507,254SMO,253MA.etc. |
| Thickness | 0.6 - 30.0mm |
| Stock Thickness | 0.6mm ,0.8mm,1.0mm,1.2mm,1.5mm.2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm,10.0mm,12.0mm,14.0mm,16.0mm,20.0mm,25mm,30.0mm |
| Width | 1000mm 1219mm 1500mm or cutting any size as your request |
| Finish | 2B, BA, No. 1, No. 4, mirror, brush, hairline, chequered, embossed, etc. |
| Package | Standard export package |
Stainless steel grade 254 SMO Stainless Steel Plate is a very high end austenitic stainless steel. Since the 254 SMO Sheet is intended for use under severe corrosive conditions, welding must be carried out with care and followed by thorough cleaning to ensure that the weld metal and the heat-affected zone maintain the best possible corrosion properties. Remember that Alloy 254 SMO Plate the heat input during welding should not exceed 1.5 kJ/mm, and in multi-pass welding the interpass temperature should not exceed 100°C (210°F). The welding of fully austenitic steel SMO 254 Plate usually entails a risk of hot-cracking in the weld metal, particularly if the weldment is under constraint but as our 254 SMO Coil has a very high degree of purity, then the risk of this type of cracking is greatly reduced. Alloy 254 SMO (UNS S31254) in 254 SMO Clad Plate, 254 SMO Shim, 254 SMO Rolling Sheets, 254 SMO Flat Sheet is designated as UNS S31254 and Werkstoff Number 1.4547.
Here are few points to recognised sheet, plate or foil:
254 SMO Plate mechanical properties
UNS S31254 6 Mo Plate, Sheet & Coil Chemical Composition
| Grade | Ni | Cr | Mo | Cu | N | C | Mn | Si | P | S |
| SMO 254 | 17.5-18.5 | 19.5-20.5 | 6-6.5 | 0.5-1.0 | 0.18-0.22 | 0.02 | 1.0 | 0.08 | 0.03 | 0.01 |
SMO 254 Sheets, Plates & Coils Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
Equivalent Grades for 254 SMO Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | SIS | AFNOR | EN |
| SMO 254 | 1.4547 | S31254 | 2378 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
| Sizes in Inches | Sizes in mm |
|---|---|
| .125" | 3.18 |
| .134" | 3.40 |
| .156" | 3.96 |
| .187" | 4.75 |
| .250" | 6.35 |
| .312" | 7.92 |
| .375" | 9.53 |
| .500" | 12.7 |
| .625" | 15.9 |
| .750" | 19.1 |
| .875" | 22.2 |
| 1" | 25.4 |
| 1.125" | 28.6 |
| 1.250" | 31.8 |
| 1.500" | 38.1 |
| 1.750" | 44.5 |
| 2" | 50.8 |
| 2.500" | 63.5 |
| 3" | 76.2 |
| Surface finish | Thickness (mm) | Width (mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
| 2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
| 2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
| 2H – Work hardened | 0.4–6.35 | max. 1524 |
| Polished, brushed | 0.5–4.0 | max. 1524 |
| Surface finish | Gauge (in) | Width (in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
| 2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
| BA Mexinox only | 18–28 | max. 48 |
| Polished (not brushed) | 11–24 | max. 60 |
| Temper rolled Mexinox only | 13–29 | max. 48 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative... Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative...
Get in touch with us
Leave a Message, we will call you back quickly!