JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
| Payment Terms | L/C, T/T |
| Supply Ability | 100 Tons |
| Delivery Time | 15 days |
| Packaging Details | Standard Export Packing |
| OD | 6-630mm |
| Thickness | 0.5-100mm |
| Length | 1000-12000mm |
| Type | Cold Drawn |
| Surface | NO.1 |
| Brand Name | Mittel |
| Model Number | 254smo |
| Certification | SGS ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
TP316L Stainless Steel Seamless Tube ASTM A312 SS Seamless Pipes
Duplex 2205 / 1.4462 / S31803 / S32205 Stainless Steel Seamless Tube
UNS32750 Alloy 32750 Duplex Stainless Steel Pipe OD3 - 200mm WT0.5 - 12 mm
SUS630 Stainless Steel Tube 17-4PH Tube Martensitic Precipitation Hardening
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 100 Tons |
| Delivery Time | 15 days | Packaging Details | Standard Export Packing |
| OD | 6-630mm | Thickness | 0.5-100mm |
| Length | 1000-12000mm | Type | Cold Drawn |
| Surface | NO.1 | Brand Name | Mittel |
| Model Number | 254smo | Certification | SGS ISO |
| Place of Origin | China | ||
| High Light | seamless stainless steel tube ， astm stainless steel pipe | ||
Super Austenite 254SMO According To UNS S313254 Seamless Tube 254Smo Pipe and Fittings
Stainless steel grade 254 SMO™ is a very high end austenitic stainless steel. It is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with strength that is twice that of the stainless steel 300 series.
For certain applications, grade 254 SMO™ has been reported to be a cost-effective substitute for high nickel and titanium alloys. It is known to possess excellent workability as well.
The following sections will discuss in detail about stainless steel grade 254 SMO™.
The chemical composition of stainless steel grade 254 SMO™ is outlined in the following table.
| Element | Content (%) |
|---|---|
| Iron, Fe | 55.69 |
| Chromium, Cr | 20 |
| Nickel, Ni | 18 |
| Molybdenum, Mo | 6.1 |
| Nitrogen, N | 0.20 |
| Carbon, C | 0.010 |
The physical properties of stainless steel grade 254 SMO™ are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8 g/cm3 | 0.289 lb/in3 |
The following table shows mechanical properties of stainless steel grade 254 SMO™.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 680 MPa | 98600 psi |
| Yield strength | 300 MPa | 43500 psi |
| Modulus of elasticity | 195 GPa | 28300 ksi |
| Shear modulus | 75 GPa | 10900 ksi |
| Poisson’s ratio | 0.30 | 0.30 |
| Elongation at break | 50 % | 50 % |
| Hardness, Brinell | 210 | 210 |
The thermal properties of stainless steel grade 254 SMO™ are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@20-100°C/68-212°F) | 16.5 µm/m°C | 9.17 µin/in°F |
| Thermal conductivity | 14 W/mK | 97.2 BTU in/hr.ft².°F |
Other designations that are equivalent to stainless steel grade 254 SMO™ include the following.
| ASTM A813 | ASTM A469 | ASTM A269 | ASTM A240 | ASTM A182 (F44) |
| ASTM A814 | ASTM A312 | ASTM A249 | | |
Stainless steel grade 254 SMO™ is quite tough to machine due to the extremely high work hardening rate and lack of sulfur content; however using sharp tools, overpowered machine tools, positive feeds, good amount of lubrication, and slow speeds tend to provide good machining results.
Welding of stainless steel grade 254 SMO™ requires filler material without which it results in poor strength properties. Filler metals such as AWS A5.14 ERNiCrMo-3, and alloy 625 are recommended. Electrodes used in the process, have to match with AWS A5.11 ENiCrMo-12.
Annealing of this material should be performed at 1149-1204°C (2100-2200°F), which should be followed by a water quench.
Forging, upsetting and other operations relating to this material can be performed at 982 - 1149°C (1800 - 2100°F). It is recommended that temperatures do not exceed this range as it would result in scaling and reduction in the workability of the material. To re-attain maximum corrosion resistant properties, it is advisable to perform post-process annealing.
Cold working can be carried out using all the traditional methods; however the process would be tough due to its high work hardening rate. The result will provide the material with increased strength and toughness.
Stainless steel grade 254 SMO™ does not respond to heat treatment. Hardening is possible only through cold reduction.
Stainless steel grade 254 SMO™ is used in the following areas:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
1998
Total Annual:
80Millen-100 Millen
Employee Number:
200~500
Ecer Certification：
Verified Supplier
Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta... Jiangsu Mittel Steel Industrial Limited is located in Wuxi City, a beautiful city near Shanghai. Wuxi is close to Shanghai (BAO STEEL) ,Zhangjiagang (ZPSS),Ningbo (BAO XIN),KUN SHAN (DKSS), enjoy excellent geographic location and convenient water, land and air transporta...
Get in touch with us
Leave a Message, we will call you back quickly!