BoYue Industrial (Shanghai)Co., Ltd.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 10000 ton per Month |
| Delivery Time | 5-8 work days |
| Packaging Details | PLY-WOODEN CASE OR PALLET |
| Product Name | Alloy Steel Pipe |
| Material | Nickel-Cobalt Alloy |
| OD | 1/2"-48” |
| Type | Seamless or welded |
| Thickness | SCH 5-SCH XXS |
| End | BE or PE |
| Standard | EN10216-2 10CrMo9-10 |
| Prodcut | steel pipe tube |
| Brand Name | BY |
| Model Number | BYAS00057 |
| Certification | PED SGS ISO TUV |
| Place of Origin | China |
View Detail Information
Explore similar products
4 Inch SCH 40 Seamless Alloy Pipe Incoloy X800 Nickel Alloy Steel Pipe For
ASTM B622 Nickel Alloy Steel Pipe UNS NO10276 Seamless Alloy Steel Pipe 25mm*2mm
ASTM A335 P5 P9 Alloy Steel Seamless Welded Pipe SCH 5X - SCH 160 ISO SGS BV
ASTM A333 1/2" - 48" Alloy Steel Pipe / Seamless And Welded Pipe With Heat
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 10000 ton per Month |
| Delivery Time | 5-8 work days | Packaging Details | PLY-WOODEN CASE OR PALLET |
| Product Name | Alloy Steel Pipe | Material | Nickel-Cobalt Alloy |
| OD | 1/2"-48” | Type | Seamless or welded |
| Thickness | SCH 5-SCH XXS | End | BE or PE |
| Standard | EN10216-2 10CrMo9-10 | Prodcut | steel pipe tube |
| Brand Name | BY | Model Number | BYAS00057 |
| Certification | PED SGS ISO TUV | Place of Origin | China |
| High Light | alloy steel tube ，alloy steel seamless pipes | ||
Alloy Steel Pipe EN10216-2 10CrMo9-10 Seamless Steel Pipe PE BE Oil
The tubes shall be manufactured by a seamless process.
Option: The tubes shall be cold finished before heat treatment.
Chemical composition, %
| Grade | C | Si | Mn | P, max | S, max | Cr | Mo | Ni | Al | Cu | Nb | Ti, max | V | Cr+Cu +Mo+Ni | Others |
| P235GH | ≤0.16 | ≤0.35 | ≤1.20 | 0.025 | 0.020 | ≤0.30 | ≤0.08 | ≤0.30 | ≥0.02 | ≤0.30 | ≤0.01 | 0.040 | ≤0.02 | ≤0.70 | - |
| P265GH | ≤0.20 | ≤0.40 | ≤1.40 | 0.025 | 0.020 | ≤0.30 | ≤0.08 | ≤0.30 | ≥0.02 | ≤0.30 | ≤0.01 | 0.040 | ≤0.02 | ≤0.70 | |
| 13CrMo4-5 | 0.10-0.17 | ≤0.35 | 0.40-0.70 | 0.025 | 0.020 | 0.70-1.15 | 0.40-0.60 | ≤0.30 | ≤0.040 | ≤0.30 | - | - | - | - | - |
| 10CrMo9-10 | 0.08-0.14 | ≤0.50 | 0.30-0.70 | 0.025 | 0.020 | 2.00-2.50 | 0.90-1.10 | ≤0.30 | ≤0.040 | ≤0.30 | - | - | - | - | - |
| 15NiCuMoNb5-6-4 | ≤0.17 | 0.25-0.50 | 0.80-1.20 | 0.025 | 0.020 | ≤0.30 | 0.25-0.50 | 1.00-1.30 | ≤0.05 | 0.50-0.80 | 0.015-0.045 | - | - | - | - |
| X10CrMoVNb9-1 | 0.08-0.12 | 0.20-0.50 | 0.30-0.60 | 0.020 | 0.010 | 8.00-9.50 | 0.85-1.05 | ≤0.40 | ≤0.04 | ≤0.30 | 0.06-0.10 | - | 0.18-0.25 | - | N: 0.030-0.070 |
Mechanical properties
| Steel grade | Upper yield strength or proof strength ReH or Rp0,2 for Wall Thickness T min. | Tensile strength Rm | Elongation A min. % | ||||
| T≤16 | 16<T≤40 | 40<T≤60 | 60<T≤100 | I | T | ||
| MPa | MPa | MPa | MPa | MPa | |||
| P235GH | 235 | 225 | 215 | - | 360-500 | 25 | 23 |
| P265GH | 265 | 255 | 245 | - | 410-570 | 23 | 21 |
| 13CrMo4-5 | 290 | 290 | 280 | - | 440-590 | 22 | 20 |
| 10CrMo9-10 | 280 | 280 | 270 | - | 480-630 | 22 | 20 |
| 15NiCuMoNb5-6-4 | 440 | 440 | 440 | 440 | 610-780 | 19 | 17 |
| X10CrMoVNb9-1 | 450 | 450 | 450 | 450 | 630-830 | 19 | 17 |
Minimum proof strength Rp0,2 at elevated temperature
| Steel grade | Wall thickness mm | Minimum proof strength Rp0,2 MPa at temperature of °C | ||||||||||
| 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | ||
| P235GH | ≤60 | 198 | 187 | 170 | 150 | 132 | 120 | 112 | 108 | - | - | - |
| P265GH | ≤60 | 226 | 213 | 192 | 171 | 154 | 141 | 134 | 128 | - | - | - |
| 13CrMo4-5 | ≤60 | 264 | 253 | 245 | 236 | 192 | 182 | 174 | 168 | 166 | - | - |
| 10CrMo9-10 | ≤60 | 249 | 241 | 234 | 224 | 219 | 212 | 207 | 193 | 180 | - | - |
| 15NiCuMoNb5-6-4 | ≤80 | 422 | 412 | 402 | 392 | 382 | 373 | 343 | 304 | - | - | - |
| X10CrMoVNb9-1 | ≤100 | 410 | 395 | 380 | 370 | 360 | 350 | 340 | 320 | 300 | 270 | 215 |
Appearance
1 The tubes shall be free from external and internal surface defects that can be detected by visual examination.
2 The internal and external surface finish of the tubes shall be typical of the manufacturing process and, where applicable, the heat treatment employed. Normally the finish and surface condition shall be such that any surface imperfections requiring dressing can be identified.
3 It shall be permissible to dress, only by grinding or machining, surface imperfections provided that, after doing so, the wall thickness in the dressed area is not less than the specified minimum wall thickness. All dressed areas shall blend smoothly into the contour of the tube.
4 Any surface imperfection, which is demonstrated to be deeper than 5 % of the wall thickness T or 3 mm whichever is the smaller, shall be dressed. This requirement does not apply to surface imperfection with a depth equal or less 0,3 mm
5 Surface imperfections which encroach on the specified minimum wall thickness shall be considered defects and tubes containing these shall be deemed not to conform to this Part of EN 10216.
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI, ISO, ASME, DIN, ASTM | Type | Seamless |
| ModelNumber | Alloy Steel Pipe | Thickness | SCH 5-SCH XXS |
| Packing | Depending on customer | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000 ton per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | Depending on customer |
Why Choose Us
1.One-Stop Service,One Single Source.
2.No MOQ.
3.Best quality,competitive price
4.Fast Reply.
5.On-Time Delivery
6.Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to ensure quality standard, but it’s charged according to your drawing.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller
Year Established:
2008
Total Annual:
5000000-8000000
Employee Number:
300~500
Ecer Certification：
Active Member
BoYue Industrial (Shanghai)Co., Ltd. is a professional, young and dynamic enterprise. Adhering to the concept of “survival by quality, development by innovation, cooperation by service”, we provide customers with reliable quality, reasonable price and stable delivery time. Our main pr... BoYue Industrial (Shanghai)Co., Ltd. is a professional, young and dynamic enterprise. Adhering to the concept of “survival by quality, development by innovation, cooperation by service”, we provide customers with reliable quality, reasonable price and stable delivery time. Our main pr...
Get in touch with us
Leave a Message, we will call you back quickly!