YUHONG HOLDING GROUP CO., LTD
| Application | Heat Exchangers, Refinery Air Cooler,Power Generation's Cooling System, Refinery Air Cooler |
| Payment Terms | L/C,T/T,AT SIGHT |
| Supply Ability | According to Clients' requirements |
| Delivery Time | 45-75 Days (Depend on Customer's Requirement) |
| Packaging Details | Ply-wooden Cases with Steel Frames(both ends of pipes have plastic caps） |
| Bare Tube Specification | ASTM A335 |
| Bare Tube Material | p9 |
| Bare Tube Diameter | 25-219MM |
| Fin Pitch | 8-30MM |
| Fin Hight | 5-35MM |
| Brand Name | YUHONG |
| Certification | ABS, BV, ISO, ASTM, SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
ASTM A213 T9 Alloy Steel Studded Fin Tubes
ASTM A335 P9 Studded Tube, With 11Cr Studs Material , Fired Heater , Furnace
Studded Tube, ASME SA335 P22 Alloy Steel Seamless Pipe With 11Cr Studs, Radiant
Alloy Steel Studded Tube, ASME SA335 P5 With 11Cr, Fired Heater, Convective
Product Specification
| Application | Heat Exchangers, Refinery Air Cooler,Power Generation's Cooling System, Refinery Air Cooler | Payment Terms | L/C,T/T,AT SIGHT |
| Supply Ability | According to Clients' requirements | Delivery Time | 45-75 Days (Depend on Customer's Requirement) |
| Packaging Details | Ply-wooden Cases with Steel Frames(both ends of pipes have plastic caps） | Bare Tube Specification | ASTM A335 |
| Bare Tube Material | p9 | Bare Tube Diameter | 25-219MM |
| Fin Pitch | 8-30MM | Fin Hight | 5-35MM |
| Brand Name | YUHONG | Certification | ABS, BV, ISO, ASTM, SGS |
| Place of Origin | China | ||
| High Light | ASTM A335 P5 alloy studded fin tube ，heat exchanger studded fin tube ，alloy steel studded tube with warranty | ||
ASTM A335 P5 Studded Fin Tube
ASTM A335 P5 is a chromium-molybdenum alloy steel known for its good creep strength and oxidation resistance at elevated temperatures. Its key characteristic is the nominal 5% Chromium content, which provides improved resistance to sulfur-bearing atmospheres and higher temperature strength compared to lower alloy steels.
The ASTM A335 P5 Studded Fin Tube is a high-performance thermal component where studs (pins) are welded onto the base tube to create an extended heat transfer surface. This design is particularly effective in high-temperature and abrasive environments where conventional finned tubes might be unsuitable.
P5 Chemical Composition (%)
|
Element |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
|
Range |
0.15 max |
0.30-0.60 |
0.50 max |
0.025 max |
0.025 max |
4.00-6.00 |
0.45-0.65 |
P5 Mechanical Properties
|
Tensile Strength |
Yield Strength |
Elongation |
Hardness |
|
≥ 415 MPa (60 ksi) |
≥ 205 MPa (30 ksi) |
≥ 30% |
≤ 179 HB |
Comparison with Related Grades
P5 vs. P11/P22:
P5, with ~5% Cr, offers superior oxidation resistance and high-temperature strength compared to P11 (1.25% Cr) and P22 (2.25% Cr), making it suitable for more severe service conditions.
P5 vs. P9/P91:
P9 (9% Cr) offers better oxidation resistance, while P91 (9% Cr with V, Nb) provides significantly higher creep strength. P5 serves as a cost-effective option for intermediate temperature ranges.
Key Features & Advantages
High-Temperature Strength: Maintains good mechanical strength and resistance to creep at temperatures up to approximately 600°C (1100°F).
Oxidation & Sulfidation Resistance: The 5% Cr content provides a stable protective scale, offering better resistance than carbon steel to oxidizing and sulfur-bearing environments.
Enhanced Heat Transfer: The studded design drastically increases the surface area, significantly improving heat transfer efficiency in gas-to-liquid applications.
Mechanical Durability: The welded studs create a robust structure capable of withstanding abrasive and high-gas-velocity conditions.
Proven Performance: A well-established material for high-temperature pressure service in accordance with ASME Boiler and Pressure Vessel Code.
Applications of the ASTM A335 P5 Studded Tube
1.Petrochemical Heaters: Used in furnace convection and radiant sections for cracking and reforming processes.
2.Chemical Process Heaters: As heat transfer tubes in direct-fired heaters handling corrosive process streams.
3.Waste Heat Boilers: In high-temperature sections for recovering energy from process flue gases.
4.Power Generation: For specific high-temperature heat recovery systems and boiler elements.
5.Syngas Coolers: In environments where temperature and corrosion resistance are critical.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller,Other
Year Established:
1990
Total Annual:
50M-70M
Employee Number:
50~800
Ecer Certification：
Verified Supplier
Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. &n... Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. &n...
Get in touch with us
Leave a Message, we will call you back quickly!