ASTM A106 Gr.B Embedded Finned Tube with Cu-T2 Fins For Process Gas Coolers

Product Specification

ASTM A106 Gr.B Embedded Finned Tube with Cu-T2 Fins For Process Gas Coolers

This is a high-performance heat exchanger tube. It consists of a carbon steel base tube designed for high pressure and temperature, with copper fins mechanically bonded to its outer surface. The purpose of the fins is to drastically increase the surface area for highly efficient heat transfer, typically from a hot gas to a liquid (like water) inside the tube.

Detailed Breakdown

1. ASTM A106 Gr.B (The Base Tube)

(1) Chemical Composition

The chemical composition is critical for ensuring the steel's weldability, corrosion resistance, and high-temperature performance. The values are given as a maximum percentage, unless a range is specified.

(2) Mechanical Properties

The mechanical properties define the tube's strength and ductility. These are determined by standardized tensile and hardness tests.

Key Properties: The base tube is strong, durable, and can withstand high internal pressures and temperatures (typically up to ~450°C / 850°F).

2. Embedded Finned Tube (The Technology)

Embedded (or G-Finned): This describes the specific mechanical bonding process:

• A groove is machined into the outer wall of the steel base tube.
• A strip of fin material (in this case, copper) is fed into a machine.
• The machine wraps the fin strip tightly around the tube.
• As it wraps, a special tool "embeds" or folds the inner edge of the fin into the pre-cut groove, creating a tight mechanical lock.

Advantage of Embedding: This creates a very strong bond with excellent thermal contact. It is much more robust than simply welding fins on and is highly resistant to thermal cycling and vibration, which could loosen other types of bonds.

3. Cu-T2 Fins (The Fin Material)

Cu: Chemical symbol for Copper.

T2 (C11000): This is a specific grade of copper per the ASTM B152 standard. It is also known as "Electrolytic Tough Pitch" (ETP) copper. It has a very high purity (99.95% Cu) and is the most common and standard form of copper used in industrial applications.

Primary Composition

Why Copper?

• Excellent Thermal Conductivity: Copper is one of the best commercially available conductors of heat (~400 W/m·K). This allows heat from the gas to quickly transfer through the fin into the base tube.
• Malleability: It is easy to form and wrap tightly around the base tube during the embedding process.
• Corrosion Resistance: It resists corrosion from atmospheres and many flue gases.

The application of an ASTM A106 Gr.B Embedded Finned Tube with Cu-T2 Fins is highly specialized and revolves around one core principle: efficiently recovering waste heat from high-temperature gases to heat a pressurized liquid. Here are the key application areas:

1. Heat Recovery Steam Generators (HRSGs)

• Function: HRSGs are massive boilers that sit behind gas turbines in combined cycle power plants. They capture the exhaust from the turbine (which can be 500-600°C / 900-1100°F) to produce steam.
• Role of the Finned Tube: These tubes are used in the economizer and evaporator sections of the HRSG.
  • The hot exhaust gas flows over the externally finned tubes.
  • Pressurized water flows inside the A106 Gr.B base tube.
  • The copper fins efficiently absorb heat from the gas, transferring it through the steel wall to heat the water and generate steam.
• Why it's used: The combination allows the HRSG to extract maximum energy from the turbine exhaust, significantly increasing the overall plant efficiency.

2. Boiler Economizers

• Function: An economizer is a standard add-on to almost any industrial boiler (e.g., in chemical plants, refineries, paper mills). Its job is to pre-heat the feedwater before it enters the boiler drum.
• Role of the Finned Tube: The economizer is located in the boiler's flue gas path.
  • The relatively cool feedwater (e.g., 100-150°C / 212-302°F) enters the tubes.
  • The hot flue gas (250-400°C / 480-750°F), which would otherwise be wasted up the stack, flows over the finned exterior
  • The heat is transferred, pre-heating the water and saving significant fuel, as the boiler doesn't have to work as hard to turn the water into steam.
• Why it's used: The efficiency gain from an economizer directly reduces fuel consumption and operating costs. The embedded fin design ensures long-term reliability under constant thermal cycling.

3. Process Gas Coolers & Heaters

• Function: In petrochemical, refining, and chemical processing, numerous streams of process gases need to be cooled down or heated up at various stages.
• Role of the Finned Tube: These tubes are bundled into heat exchangers (often called "finned tube bundles" or "waste heat recovery units").
  • Example (Cooling): Cooling a hot synthesis gas stream by transferring its heat to generate boiler feedwater.
  • Example (Heating): Pre-heating combustion air for a furnace (an "air pre-heater") using hot flue gas, which improves combustion efficiency.
• Why it's used: The copper fins allow for a compact heat exchanger design. Achieving the same heat transfer rate with bare tubes would require a much larger, more expensive, and bulky unit.