Product Specification

High Frequency Welded Serrated Fin Tube (ASTM A213 T22 Base + SS409 Fin)

1. Detailed Introduction to A213 T22 & SS409 Serrated Fin Tubes

The High Frequency Welded (HFW) Serrated Fin Tube, featuring an ASTM A213 T22 alloy steel base tube and SS409 stainless steel fins, is a premium heat transfer component engineered for heavy-duty industrial applications. By combining the exceptional high-temperature creep resistance of T22 alloy steel with the superior corrosion and oxidation resistance of SS409 stainless steel, this fin tube offers an optimal balance of durability and thermal efficiency. The serrated (segmented) fin design significantly breaks the gas boundary layer, enhancing the heat transfer coefficient compared to solid fins, making it the ultimate choice for highly demanding heat recovery systems.

2. Structure & High-Frequency Welding Process of A213 T22 & SS409 Finned Tubes

The structural integrity and heat transfer capability of a finned tube depend heavily on its construction and manufacturing process:

• Base Tube (ASTM A213 T22): A seamless ferritic alloy-steel tube designed for high-temperature service. It acts as the pressure-bearing core, carrying the internal fluid (steam or water) safely under extreme conditions.

• Serrated Fin (SS409): The fin strip is cut into segments (serrations) before being continuously helically wound onto the base tube. SS409 provides excellent resistance to exhaust gas corrosion.

• Attachment / Welding Process (HFW vs. Mechanical Embedding): Unlike mechanically embedded fins (嵌入工艺) which may suffer from thermal contact resistance at high temperatures, our fins are attached using High Frequency Resistance Welding (HFW). An electrical current heats the fin base and the tube surface to a plastic state, and they are forged together under pressure. This creates a 100% metallurgical bond between the A213 T22 tube and the SS409 fin, ensuring zero heat-transfer loss and preventing fins from loosening during thermal cycling.

3. Chemical Composition of A213 T22 Base Tube and SS409 Fin

To ensure material authenticity and guarantee long-term operational lifespan, we strictly adhere to ASME/ASTM international standards. Below is the precise chemical composition of the materials used in our fin tubes:

4. Dimensional Tolerance Range for A213 T22 & SS409 Finned Tubes

Precision engineering is critical for seamless installation into heat exchanger tube bundles. We manufacture these HFW serrated fin tubes with exceptionally tight dimensional tolerances:

5. Performance Advantages of A213 T22 Base and SS409 Serrated Fin Tubes

• Superior Heat Transfer: The serrated SS409 fins create turbulence in the cross-flow gas stream, increasing heat transfer efficiency by up to 15-20% compared to solid continuous fins.

• High-Temperature Stability: The A213 T22 base tube provides excellent creep-rupture strength, making it perfectly suited for high-pressure, superheated steam applications up to 590°C (1094°F).

• Exceptional Anti-Corrosion: The SS409 stainless steel fins offer outstanding resistance to oxidation and mild acidic corrosion found in flue gas exhausts.

• Vibration & Fouling Resistance: The robust HFW metallurgical bond prevents fin vibration failure, while the serrated design helps reduce ash fouling and makes cleaning/soot-blowing much easier.

6. Applications of ASTM A213 T22 / SS409 Welded Serrated Finned Tubes

Due to their rugged construction and material synergy, these finned tubes are predominantly used in heavy industries involving hot, corrosive flue gases and high internal pressures:

• Heat Recovery Steam Generators (HRSG): Widely used in the superheater and reheater sections of combined cycle power plants.

• Boilers & Economizers: Ideal for utility boiler economizers to recover waste heat from flue gases, significantly saving fuel consumption.

• Petrochemical Fired Heaters: Used in the convection sections of refinery heaters and cracking furnaces.

• Waste Heat Recovery Units (WHRU): Applied in various heavy industries (cement, steel, glass) to capture exhaust heat and convert it into usable steam.

7. Our Advantages & Experience in A213 T22 & SS409 Fin Tubes Manufacturing

As a veteran supplier and manufacturer in the global thermal engineering sector, we bring unmatched expertise to your projects:

• Decades of Export Experience: We have successfully delivered hundreds of tons of A213 T22 and SS409 serrated fin tubes to power plants and engineering EPC contractors across North America, the Middle East, and Southeast Asia.

• Strict Quality Control: Every single tube undergoes rigorous testing, including Hydrostatic testing of the A213 T22 base tube, Eddy Current testing, and pull-tests on the SS409 fins to verify the weld strength.

• Customization Capabilities: We don't just sell standard sizes; we work with your engineering drawings to customize fin pitch, height, and bare end preparations, ensuring 100% plug-and-play installation for your heat exchangers.

• Fast & Safe Logistics: Industrial packaging with robust steel frames and VCI (Volatile Corrosion Inhibitor) materials guarantees your finned tubes arrive globally without bending or rust.

Contact our engineering sales team today to get a competitive quote for your A213 T22 / SS409 High Frequency Welded Serrated Fin Tube requirements!