ASTM A179 Embedded Finned Tube / G Finned Tube with Aluminum Fins For Heat

Product Specification

ASTM A179 Embedded Finned Tube / G Finned Tube with Aluminum Fins For Heat Exchanger

What is ASTM A179 Embedded Finned Tube with Aluminum Fins?

An embedded finned tube is a type of heat exchanger tube designed to improve heat transfer efficiency by increasing the surface area in contact with the surrounding medium (e.g., air, gas, or liquid). It consists of a base tube (typically made of metal) with fins that are mechanically embedded or bonded to the outer surface of the tube. The fins are usually made of a highly conductive material, such as aluminum or copper, to enhance heat transfer.

Key Features:

1. Base Tube Material: The core tube is made of ASTM A179 steel, which is known for its excellent thermal conductivity, strength, and corrosion resistance. This material is specifically designed for heat transfer applications.
2. Fins: The aluminum fins are embedded or attached to the outer surface of the steel tube. These fins increase the surface area of the tube, improving heat transfer between the tube and the surrounding medium (e.g., air or gas).
3. Embedded Fins: The term "embedded" typically means the fins are mechanically bonded or welded to the tube, ensuring a strong and durable connection. This design prevents the fins from loosening over time, even under thermal cycling or mechanical stress.

Advantages:

1. Enhanced Heat Transfer: The fins significantly increase the surface area, improving heat exchange efficiency. 
2. Durability: The combination of steel and aluminum provides a balance of strength and corrosion resistance.
3. Lightweight: Aluminum fins reduce the overall weight compared to all-steel finned tubes.

Material Composition (Chemical Requirements):

The chemical composition of ASTM A179 steel tubes is primarily low-carbon steel, with the following elements (in weight percent):

The low carbon content ensures good weldability and formability.

The manganese content provides strength and toughness.

Phosphorus and sulfur are kept to a minimum to avoid brittleness and improve ductility.

Mechanical Properties:

ASTM A179 tubes are required to meet specific mechanical properties to ensure their suitability for heat transfer applications. These properties include:

The ASTM A179 Embedded Finned Tube with Aluminum Fins is a specialized heat transfer component designed for applications where efficient heat exchange is critical. The combination of the ASTM A179 steel tube (known for its strength and thermal conductivity) and aluminum fins (known for their lightweight and high thermal conductivity) makes this type of finned tube highly effective in various industrial and commercial applications. Below are the key applications of this product:

1. Heat Exchangers

Air-Cooled Heat Exchangers: The aluminum fins increase the surface area, enhancing heat transfer between the tube and the surrounding air. These are commonly used in power plants, refineries, and chemical processing facilities.

Liquid-to-Air Heat Exchangers: Used in systems where a liquid (e.g., water or oil) needs to be cooled by air.

2. Condensers

Power Plant Condensers: In steam power plants, these tubes are used to condense exhaust steam from turbines back into water.

Refrigeration and HVAC Systems: Used in condensers for air conditioning and refrigeration units to improve cooling efficiency.

3. Economizers

Boiler Economizers: These tubes are used in economizers to recover waste heat from flue gases and preheat boiler feedwater, improving overall system efficiency.

4. Oil and Gas Industry

Gas Cooling Systems: Used to cool natural gas or other process gases in refineries and petrochemical plants.

Heat Recovery Systems: For recovering waste heat from exhaust gases or other process streams.

5. Industrial Process Heating and Cooling

Chemical Processing: Used in reactors, distillation columns, and other equipment where precise temperature control is required.

Food and Beverage Industry: For heating or cooling processes in production lines.

6. Renewable Energy Systems

Biomass and Waste-to-Energy Plants: Used in heat recovery systems to improve energy efficiency.

Geothermal Systems: For heat exchange in geothermal power generation.

7. HVAC Systems

Air Handling Units (AHUs): Used in heating and cooling coils to improve the efficiency of air conditioning systems.

Chillers: For heat exchange in water-cooled or air-cooled chillers.

8. Automotive and Aerospace

Radiators and Oil Coolers: Used in vehicles and aircraft for cooling engines and other systems.