ASTM A213 T9 Studded Tube / Pin Tube with Alloy Steel Studs for Refinary

Product Specification

ASTM A213 T9 Studded Tube / Pin Tube with Alloy Steel Studs

Regarding "studded tubes," these are types of heat exchanger tubes that have studs (protrusions or projections) attached to their outer surface to increase the surface area for heat transfer purposes. These studs are usually welded onto the tube surface and can be made from the same material as the tube or a different material that is suitable for the intended application.

Such tubes are commonly used in furnaces, boilers, and heat exchangers in the petrochemical, chemical, and power generation industries. The presence of studs significantly increases the surface area, enhancing the heat transfer efficiency between the fluids inside the tube and the outside environment. Studded tubes often perform better than finned tubes in environments where fouling can occur since they are easier to clean and maintain.

The ASTM A213 T9 studded tube with alloy steel studs is a specialized type of heat exchanger tube designed for high-temperature and high-pressure applications, commonly used in boilers, superheaters, and heat recovery systems.

Here are some detailed features of ASTM A213 T9 studded tube with alloy steel studs:

1. Chemical Composition of ASTM A213 T9 (%)

Notes:

Small amounts of residual elements (Cu, Ni, etc.) may be present but are not specified.

The high Cr & Mo content provides oxidation and creep resistance at elevated temperatures.

2. Mechanical Properties of ASTM A213 T9

Notes:

Heat Treatment: T9 tubes are usually supplied in the normalized & tempered condition.

Impact Resistance: Not explicitly specified in ASTM A213 but generally good due to alloy composition.

Creep Strength: Excellent for long-term high-temperature service.

Comparison with Other Grades (T9 vs. T11 vs. T22)

3. Studded Design:

Studs (Pins): Small cylindrical or conical projections welded onto the outer surface of the tube.

Material: Typically made of alloy steel (often similar to or compatible with T9, such as SA213 T11/T22 or high-chromium steels).

Purpose:

• Increases heat transfer efficiency by expanding the surface area.
• Enhances gas-to-tube heat exchange in boilers and furnaces.
• Reduces ash and slag buildup in high-ash flue gas environments.

4. Manufacturing Process:

• Stud Welding: Studs are resistance-welded (arc stud welding) to the tube surface in a staggered or spiral pattern.
• Quality Standards: Complies with ASME Boiler & Pressure Vessel Code (Section I) and ASTM A213/ASTM A192 for material integrity.

5. Advantages:

• Enhanced Heat Transfer: More efficient than bare tubes.
• Erosion & Corrosion Resistance: Suitable for harsh environments.
• Reduced Fouling: Minimizes ash/slag deposits.

6. Comparison with Other Studded Tubes:

T9 vs. T11/T22: T9 has higher chromium content (8-10%) compared to T11 (1.25% Cr) or T22 (2.25% Cr), offering better oxidation resistance.

Stainless Steel Studs: Sometimes used for extreme corrosion resistance, but alloy steel studs are more common for cost-effectiveness.

Key Applications of ASTM A213 T9 studded tube with alloy steel studs:

1. Boilers & Power Plants

• Superheaters & Reheaters:

Used in coal-fired, oil-fired, and biomass boilers to improve heat absorption from flue gases.

The studs increase surface area, enhancing thermal efficiency.

• Water Walls & Furnace Areas:

Prevents ash/slag buildup in circulating fluidized bed (CFB) boilers.

Resists high-temperature corrosion in aggressive combustion environments.

2. Heat Recovery Steam Generators (HRSGs)

• Waste Heat Recovery Systems:

Recovers heat from gas turbine exhaust in combined-cycle power plants.

Studded tubes improve heat transfer in economizer and evaporator sections.

3. Petrochemical & Refinery Heaters

• Fired Heaters & Cracking Furnaces:

Used in ethylene and hydrogen production where high Cr-Mo steel resists coking and oxidation.

Studs help maintain uniform heat distribution.

4. Waste Incineration Plants

• Boiler Tubes in Incinerators:

Withstands corrosive flue gases (HCl, SO₂) from burning municipal/industrial waste.

Reduces fouling from ash and particulate deposits.

5. Fluidized Bed Combustion (FBC) Boilers

• Erosion & Abrasion Resistance:

The studs protect the base tube from abrasive bed materials (sand, limestone).

Improves heat transfer in bubbling (BFB) and circulating (CFB) fluidized beds.

6. Chemical Process Industries

• High-Temperature Reactors & Heat Exchangers:

Used in sulfuric acid, ammonia, and syngas production due to corrosion resistance.