YUHONG HOLDING GROUP CO., LTD
| Payment Terms | TT, LC |
| Supply Ability | According to Clients' requirements |
| Delivery Time | 45-75 Days (Depend on Customer's Requirements) |
| Packaging Details | Ply-wooden Cases with Steel Frames(both ends of pipes have plastic caps) |
| Base Pipe Specification | ASTM A335 |
| Base Pipe Material | P22 |
| Fin Type | HFW Solid Finned Tube |
| Fin Material | 11-13 Cr |
| Base Tube/Pipe OD | 16-219 mm |
| Fin Pitch | 3-25 mm |
| Fin Height | 5-30 mm |
| Fin Thickness | 0.8-3 mm |
| Pipe Length | Customsized |
| Application Industries | Power Plant Boilers & Heat Recovery Steam Generators (HRSG); Petrochemical & Refinery Processes; Waste Heat Recovery Systems; Combined Cycle & Cogeneration Plants |
| Brand Name | Yuhong |
| Model Number | ASTM A335 P9 HFW Solid Finned Tube with 13 Cr Fins |
| Certification | ABS, BV, DNV, CCS, LR |
| Place of Origin | China |
View Detail Information
Explore similar products
High Frequency Welding Fin Tube , U Bend Type (U Bend Fin Tube),SA213 T9 And
Welding Fin Tube , Serrated Type, ASME SA106 Gr.B Seamless Pipe With CS Fin
High Frequency Welding Base Tube ASTM A312 TP304 Fin Material ASTM A240 SS 304
Welding Fin Tube, Serrated Type, Base Tube ASTM A355 GR P9, Fin Material 11Cr,
Product Specification
| Payment Terms | TT, LC | Supply Ability | According to Clients' requirements |
| Delivery Time | 45-75 Days (Depend on Customer's Requirements) | Packaging Details | Ply-wooden Cases with Steel Frames(both ends of pipes have plastic caps) |
| Base Pipe Specification | ASTM A335 | Base Pipe Material | P22 |
| Fin Type | HFW Solid Finned Tube | Fin Material | 11-13 Cr |
| Base Tube/Pipe OD | 16-219 mm | Fin Pitch | 3-25 mm |
| Fin Height | 5-30 mm | Fin Thickness | 0.8-3 mm |
| Pipe Length | Customsized | Application Industries | Power Plant Boilers & Heat Recovery Steam Generators (HRSG); Petrochemical & Refinery Processes; Waste Heat Recovery Systems; Combined Cycle & Cogeneration Plants |
| Brand Name | Yuhong | Model Number | ASTM A335 P9 HFW Solid Finned Tube with 13 Cr Fins |
| Certification | ABS, BV, DNV, CCS, LR | Place of Origin | China |
| High Light | Power Plant Boiler finned Tube ，ASTM A335 P22 finned Tube ，HFW Solid Finned Tube | ||
ASTM A335 P22 HFW Solid Finned Tube with 11-13Cr Fins For Power Plant Boilers
The ASTM A335 P22 HFW (High-Frequency Welded) Solid Finned Tube with 11-13% Chromium (Cr) Fins is a high-performance heat exchanger tube designed for extreme conditions in industrial applications. Below is a detailed breakdown of its components, manufacturing process, and key characteristics:
1. Base Tube: ASTM A335 P22 (Grade P22)
(1). Chemical Composition (Weight %)
| Element | ASTM A335 P22 Requirements | Typical Values |
| Carbon (C) | 0.05–0.15% | 0.10–0.12% |
| Manganese (Mn) | 0.30–0.60% | 0.30–0.50% |
| Phosphorus (P) | ≤ 0.025% | ≤ 0.020% |
| Sulfur (S) | ≤ 0.025% | ≤ 0.015% |
| Silicon (Si) | 0.10–0.50% | 0.20–0.40% |
| Chromium (Cr) | 1.90–2.60% | 2.00–2.25% |
| Molybdenum (Mo) | 0.87–1.13% | 0.90–1.05% |
| Nickel (Ni) | ≤ 0.40% (optional) | ≤ 0.20% |
| Vanadium (V) | ≤ 0.03% (optional) | ≤ 0.02% |
Notes:
Key Alloys: The 2.25% Cr-1% Mo composition provides excellent creep resistance and high-temperature strength.
Impurity Control: Low S and P minimize brittleness at elevated temps.
(2). Mechanical Properties
| Property | ASTM A335 P22 Requirements | Typical Values |
| Tensile Strength | ≥ 415 MPa (60 ksi) | 450–550 MPa |
| Yield Strength | ≥ 205 MPa (30 ksi) | 240–300 MPa |
| Elongation (in 50mm) | ≥ 30% | 30–35% |
| Hardness (Brinell) | ≤ 163 HBW | 130–160 HBW |
| Impact Toughness (Charpy V-notch) | ≥ 20 J (at room temp) | 30–50 J |
Notes:
High-Temp Performance: Retains strength up to 600°C (short-term exposure to 650°C).
Creep Resistance: Designed for long-term service under stress at 450–600°C (e.g., power plant piping).
(3). Heat Treatment
2. Fins: 11-13% Chromium Steel
3. Manufacturing Process
P22 steel strip is formed into a tube and welded using HFW for a uniform, high-strength joint.
Solid fins are helically wound or embedded into the tube surface.
High-pressure extrusion (for integral fins).
Resistance welding (for welded fins).
Knurling/Grooving (to enhance fin adhesion).
Stress relieving/annealing to ensure stability under thermal cycling.
4. Key Features & Advantages
| Feature | Benefit |
| High-Temp Strength | Withstands 600°C+ in boilers/HRSGs. |
| Corrosion Resistance | Resists sulfidation (H₂S), chlorides, and acidic flue gas. |
| Erosion Resistance | Durable in fly ash/abrasive gas flows (e.g., coal plants). |
| HFW Tube Integrity | Near-seamless performance, handles high-pressure steam (>100 bar). |
| Cost-Effective | Cheaper than full stainless steel tubes but outperforms Al/Cu fins in harsh conditions. |
The ASTM A335 P22 HFW (High-Frequency Welded) solid finned tube with 11-13% chromium (Cr) fins is a specialized heat exchanger component designed for high-temperature, high-pressure, and corrosive environments. Below are its key applications and advantages:
1. Primary Applications
(1) Power Plant Boilers & Heat Recovery Steam Generators (HRSG)
(2) Petrochemical & Refinery Processes
(3) Waste Heat Recovery Systems
(4) Combined Cycle & Cogeneration Plants
2. Why ASTM A335 P22 HFW Tube + 11-13% Cr Fins?
(a) Base Tube (ASTM A335 P22)
Material: Low-alloy steel (2.25Cr-1Mo) with excellent creep resistance at high temps.
HFW Process: Provides a seamless-like structure with high pressure tolerance.
Operating Range: Suitable for 500–600°C, common in power/process industries.
(b) 11-13% Chromium Fins
Oxidation Resistance: Withstands scaling at high temps (better than aluminum fins).
Corrosion Resistance: Resists sulfidation (H₂S) and chloride-induced pitting.
Mechanical Strength: Higher durability than pure Al/Cu fins in abrasive gas flows.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller,Other
Year Established:
1990
Total Annual:
50M-70M
Employee Number:
50~800
Ecer Certification：
Verified Supplier
Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. &n... Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. &n...
Get in touch with us
Leave a Message, we will call you back quickly!