YUHONG HOLDING GROUP CO., LTD
| Payment Terms | T/T, L/C AT SIGHT |
| Supply Ability | According to Clients' requirements |
| Delivery Time | Generally within 30 Days |
| Packaging Details | Ply-wooden Cases/Pallets |
| Product Name | 180 Degree Return Bend/180 Degree Elbow |
| Specification | ASTM A403 |
| Material | WP304H-S |
| Radius | LR or SR (Depend on Customer's Requirements) |
| Surface | Sand Tumbling or Sand Blasting |
| Test | Size Inspection, NDE Test... |
| Size Standard | ASME B16.9 |
| Application | Heat Exchangers, Piping Systems, Oil and Gas Industry, Water Tretment |
| Brand Name | YuHong |
| Model Number | ASTM A403 WP304H-S |
| Certification | ISO,PED, TUV, ABS, DNV, GL , LR , KR, BV, CCS, COST |
| Place of Origin | China |
View Detail Information
Explore similar products
180 Deg. Short Radius, U Bend Return, ASME SA234 WPB For Fired Heater Convection
U Bend Return , ASTM B366 C22 , NO6022 Hastelloy 180Deg. Elbow SR , Fired Heater
ASTM A815 UNS S32205 Duplex Steel U Bend Return , Heat Exchanger , Boiler
ASTM A815 WP-S S32205 Duplex Steel U Bend Return , Heat Exchanger , Boiler
Product Specification
| Payment Terms | T/T, L/C AT SIGHT | Supply Ability | According to Clients' requirements |
| Delivery Time | Generally within 30 Days | Packaging Details | Ply-wooden Cases/Pallets |
| Product Name | 180 Degree Return Bend/180 Degree Elbow | Specification | ASTM A403 |
| Material | WP304H-S | Radius | LR or SR (Depend on Customer's Requirements) |
| Surface | Sand Tumbling or Sand Blasting | Test | Size Inspection, NDE Test... |
| Size Standard | ASME B16.9 | Application | Heat Exchangers, Piping Systems, Oil and Gas Industry, Water Tretment |
| Brand Name | YuHong | Model Number | ASTM A403 WP304H-S |
| Certification | ISO,PED, TUV, ABS, DNV, GL , LR , KR, BV, CCS, COST | Place of Origin | China |
| High Light | 180 Degree stainless steel bend ，Power Plant stainless steel bend ，Stainless Steel Return Bend | ||
ASTM A403 WP304H-S Stainless Steel 180 Degree Return Bend For Power Plant
The 180-degree return bend is a specific type of pipe fitting used to change the direction of pipe flow by 180 degrees.
- It forms a U-shaped curve, reversing the flow direction completely.
- These bends are commonly used in applications such as heat exchangers, condensers, and complex piping systems that require compact designs.
ASTM A403 WP304H-S 180° Return Bend is a type of stainless steel pipe fitting used in high-temperature and corrosive environments. Here's a detailed breakdown:
1. Material ASTM A403 WP304H
Chemical Composition (ASTM A403 / ASME SA403 WP304H)
The composition complies with ASTM A403 (wrought fittings) and matches ASTM A182 F304H (forged fittings) and ASTM A312 TP304H (pipe).
| Element | Composition (% Weight, max unless specified) |
| Carbon (C) | 0.04 – 0.10 (higher C for high-temp strength) |
| Manganese (Mn) | 2.00 max |
| Phosphorus (P) | 0.045 max |
| Sulfur (S) | 0.030 max |
| Silicon (Si) | 1.00 max |
| Chromium (Cr) | 18.00 – 20.00 |
| Nickel (Ni) | 8.00 – 11.00 |
| Nitrogen (N) | 0.10 max |
| Iron (Fe) | Balance (~66-74%) |
Key Notes:
Mechanical Properties (ASTM A403 WP304H-S)
Meets ASTM A403 for solution-annealed (softened) condition.
| Property | Value |
| Tensile Strength (UTS) | ≥ 515 MPa (75 ksi) |
| Yield Strength (YS) | ≥ 205 MPa (30 ksi) |
| Elongation (% in 50mm) | ≥ 35% (minimum) |
| Hardness (Brinell/Rockwell) | HBW ≤ 201 / HRB ≤ 92 |
| Impact Test (Charpy V-Notch) | Not typically required (unless specified for low-temp use) |
Key Notes:
2. Type: 180° Return Bend
A U-shaped pipe fitting that redirects flow by 180 degrees, commonly used in:
Heat exchangers
Boiler systems
Refineries & chemical plants
Available in short-radius (SR) or long-radius (LR) configurations.
The ASTM A403 WP304H-S Stainless Steel 180° Return Bend is designed for high-temperature and corrosive environments, leveraging the superior creep resistance and strength of 304H stainless steel. Below are its key applications:
1. High-Temperature Steam & Power Plants
Boiler systems: Handles high-pressure steam (500°C+/932°F+) due to 304H’s enhanced carbon content (0.04–0.10% C) for creep resistance.
Heat exchangers: Used in U-bend sections where steam or hot fluids change direction.
Turbine bypass systems: Manages extreme thermal cycling.
2. Petrochemical & Refining
Cracker units: Withstands corrosive hydrocarbons and sulfur compounds at elevated temps.
Refinery piping: Transfers hot oils, gases, and acids (resists oxidation and scaling).
Catalytic reforming systems: 304H’s austenitic structure resists carburization.
3. Chemical Processing
Acid/alkali transport: Resists nitric acid, organic acids, and dilute chlorides (but not highly reducing acids like sulfuric).
Polymer production: Used in high-temp reaction loops.
4. Food & Pharmaceutical
Sanitary process lines: Smooth 180° return bends prevent bacterial buildup (polished finishes available).
Sterilization systems: Handles superheated steam cleaning.
5. Nuclear & Energy
Auxiliary coolant lines: 304H’s stability suits moderate radiation environments (not for core components).
Geothermal plants: Resists scaling from mineral-rich brines.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller,Other
Year Established:
1990
Total Annual:
50M-70M
Employee Number:
50~800
Ecer Certification：
Verified Supplier
Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. &n... Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories, the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always. &n...
Get in touch with us
Leave a Message, we will call you back quickly!